Simulations Plus Inc (SLP) SEC Quarterly Report (10-Q) for Q1 2017

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

FORM 10-Q

Commission file number: 001-32046

Simulations Plus, Inc.

(Name of registrant as specified in its charter)

42505 10 th Street West

Lancaster, CA 93534-7059

(Address of principal executive offices including zip code)

(661) 723-7723

(Registrant's telephone number, including area code)

Indicate by check mark whether the registrant (1) filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filings requirements for the past 90 days. Yes ☒      No ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes ☒      No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.

See the definitions of "large accelerated filer," "accelerated filer," and "smaller reporting company" in Rule 12b-2 of the Exchange Act (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐    No ☒

The number of shares outstanding of the registrant's common stock, par value $0.001 per share, as of April 10, 2017 was 17,240,626; no shares of preferred stock were outstanding.

Simulations Plus, Inc.

FORM 10-Q

For the Quarterly Period Ended February 28, 2017

Table of Contents

Part I. Financial Information

SIMULATIONS PLUS, INC.

CONDENSED CONSOLIDATED BALANCE SHEETS

The accompanying notes are an integral part of these financial statements.

SIMULATIONS PLUS, INC.

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

For the three and six months ended February 28, 2017 and February 29, 2016

The accompanying notes are an integral part of these financial statements.

SIMULATIONS PLUS, INC.

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

For the six months ended February 28, 2017 and February 29, 2016

The accompanying notes are an integral part of these financial statements.

Simulations Plus, Inc.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

February 28, 2017 and February 29, 2016

(Unaudited)

NOTE 1: GENERAL

This report on Form 10-Q for the quarter ended February 28, 2017, should be read in conjunction with the Company's annual report on Form 10-K for the year ended August 31, 2016, filed with the Securities and Exchange Commission ("SEC") on November 14, 2016. As contemplated by the SEC under Article 8 of Regulation S-X, the accompanying consolidated financial statements and footnotes have been condensed and therefore do not contain all disclosures required by generally accepted accounting principles. The interim financial data are unaudited; however, in the opinion of Simulations Plus, Inc. ("we", "our", "us"), the interim data includes all adjustments, consisting only of normal recurring adjustments, necessary for a fair statement of the results for the interim periods. Results for interim periods are not necessarily indicative of those to be expected for the full year.

Organization

Simulations Plus, Inc. ("Simulations Plus", "Lancaster") was incorporated on July 17, 1996. On September 2, 2014, Simulations Plus, Inc. acquired all of the outstanding equity interests of Cognigen Corporation ("Cognigen", "Buffalo") and Cognigen became a wholly owned subsidiary of Simulations Plus, Inc. (collectively, "Company", "we", "us", "our"), pursuant to the terms of that certain Agreement and Plan of Merger, dated as of July 23, 2014, by and between Simulations Plus and Cognigen (the "Merger Agreement").

Lines of Business

The Company designs and develops pharmaceutical simulation software to promote cost-effective solutions to a number of problems in pharmaceutical research and in the education of pharmacy and medical students, and it provides consulting services to the pharmaceutical and chemical industries. Recently, the Company has begun to explore developing software applications for defense and for health care outside of the pharmaceutical industry.

NOTE 2: SIGNIFICANT ACCOUNTING POLICIES

Principles of Consolidation

The consolidated financial statements include the accounts of Simulations Plus, Inc. and its wholly owned subsidiary, Cognigen Corporation. All significant intercompany accounts and transactions are eliminated in consolidation.

Estimates

Our condensed consolidated financial statements and accompanying notes are prepared in accordance with accounting principles generally accepted in the United States of America. Preparing financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, and expenses. These estimates and assumptions are affected by management's application of accounting policies. Actual results could differ from those estimates. Significant accounting policies for us include revenue recognition, accounting for capitalized computer software development costs, valuation of stock options, and accounting for income taxes.

Reclassifications

Certain numbers in the prior year have been reclassified to conform to the current year's presentation.

Revenue Recognition

We recognize revenues related to software licenses and software maintenance in accordance with Financial Accounting Standard Board ("FASB") Accounting Standard Codification ("ASC") 985-605, " Software - Revenue Recognition" . Software product revenue is recorded when the following conditions are met: 1) evidence of arrangement exists, 2) delivery has been made, 3) the amount is fixed, and 4) collectability is probable. Post-contract customer support ("PCS") obligations are insignificant; therefore, revenue for PCS is recognized at the same time as the licensing fee, and the costs of providing such support services are accrued and amortized over the obligation period.

As a byproduct of ongoing improvements and upgrades for the new programs and new modules of software, some modifications are provided to customers who have already purchased software at no additional charge. Other software modifications result in new, additional-cost modules that expand the functionality of the software. These are licensed separately. We consider the modifications that are provided without charge to be minimal, as they do not significantly change the basic functionality or utility of the software, but rather add convenience, such as being able to plot some additional variable on a graph in addition to the numerous variables that had been available before, or adding some additional calculations to supplement the information provided from running the software. Such software modifications for any single product have typically occurred once or twice per year, sometimes more, sometimes less. Thus, they are infrequent. The Company provides, for a fee, additional training and service calls to its customers and recognizes revenue at the time the training or service call is provided.

Generally, we enter into one-year license agreements with customers for the use of our pharmaceutical software products. We recognize revenue on these contracts when all the criteria are met.

Most license agreements have a term of one year; however, from time to time, we enter into multi-year license agreements. We generally unlock and invoice software one year at a time for multiyear licenses. Therefore, revenue is recognized one year at a time.

We recognize revenue from collaboration research and revenue from grants equally over their terms. For contract revenues based on actual hours incurred we recognize revenues when the work is performed. For fixed price contracts, we recognize contract study and other contract revenues using the percentage-of-completion method, depending upon how the contract studies are engaged, in accordance with ASC 605-35, " Revenue Recognition – Construction-Type and Production-Type Contracts" . To recognize revenue using the percentage-of-completion method, we must determine whether we meet the following criteria: 1) there is a long-term, legally enforceable contract, 2) it is possible to reasonably estimate the total project costs, and 3) it is possible to reasonably estimate the extent of progress toward completion.

Cash and Cash Equivalents

For purposes of the statements of cash flows, we consider all highly liquid investments purchased with original maturities of three months or less to be cash equivalents.

Accounts Receivable

We analyze the age of customer balances, historical bad-debt experience, customer creditworthiness, and changes in customer payment terms when making estimates of the collectability of the Company's trade accounts receivable balances. If we determine that the financial conditions of any of its customers deteriorated, whether due to customer-specific or general economic issues, an increase in the allowance may be made. Accounts receivable are written off when all collection attempts have failed.

Capitalized Computer Software Development Costs

Software development costs are capitalized in accordance with ASC 985-20, "Costs of Software to Be Sold, Leased, or Marketed" . Capitalization of software development costs begins upon the establishment of technological feasibility and is discontinued when the product is available for sale.

The establishment of technological feasibility and the ongoing assessment for recoverability of capitalized software development costs require considerable judgment by management with respect to certain external factors including, but not limited to, technological feasibility, anticipated future gross revenues, estimated economic life, and changes in software and hardware technologies. Capitalized software development costs are comprised primarily of salaries and direct payroll-related costs and the purchase of existing software to be used in our software products.

Amortization of capitalized software development costs is calculated on a product-by-product basis on the straight-line method over the estimated economic life of the products (not to exceed five years, although all of our current software products have already been on the market for 7-15 years except for our newest MedChem Designer™ program, and we do not foresee an end-of-life for any of them at this point). Amortization of software development costs amounted to $289,659 and $247,269 for the three months ended February 28, 2017 and February 29, 2016, respectively and $573,876 and $494,537 for the six months ended February 28, 2017 and February 29, 2016, respectively. We expect future amortization expense to vary due to increases in capitalized computer software development costs.

We test capitalized computer software development costs for recoverability whenever events or changes in circumstances indicate that the carrying amount may not be recoverable.

Property and Equipment

Property and equipment are recorded at cost, less accumulated depreciation and amortization. Depreciation and amortization are provided using the straight-line method over the estimated useful lives as follows:

Maintenance and minor replacements are charged to expense as incurred. Gains and losses on disposals are included in the results of operations.

Goodwill and indefinite-lived assets

Goodwill and indefinite-lived assets are not amortized, but are evaluated for impairment annually or when indicators of a potential impairment are present. Our impairment testing of goodwill is performed separately from our impairment testing of indefinite-lived intangibles. The annual evaluation for impairment of goodwill and indefinite-lived intangibles is based on valuation models that incorporate assumptions and internal projections of expected future cash flows and operating plans.

Fair Value of Financial Instruments

Assets and liabilities recorded at fair value in the Condensed Balance Sheets are categorized based upon the level of judgment associated with the inputs used to measure their fair value. The categories, as defined by the standard are as follows:

For certain of our financial instruments, including accounts receivable, accounts payable, accrued payroll and other expenses, accrued bonus to officer, and accrued warranty and service costs, the amounts approximate fair value due to their short maturities.

Research and Development Costs

Research and development costs are charged to expense as incurred until technological feasibility has been established. These costs consist primarily of salaries and direct payroll-related costs. It also includes purchased software and databases that were developed by other companies and incorporated into, or used in the development of, our final products.

Income Taxes

We utilize FASB ASC 740-10, "Income Taxes" which requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements or tax returns.

Under this method, deferred income taxes are recognized for the tax consequences in future years of differences between the tax bases of assets and liabilities and their financial reporting amounts at each year-end based on enacted tax laws and statutory tax rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established, when necessary, to reduce deferred tax assets to the amount expected to be realized. The provision for income taxes represents the tax payable for the period and the change during the period in deferred tax assets and liabilities.

Intellectual property

On February 28, 2012, we bought out the royalty agreement with Enslein Research of Rochester, New York. The cost of $75,000 is being amortized over 10 years under the straight-line method. Amortization expense for each of the three-month periods ended February 28, 2017 and 2016 was $1,875, and was $3,750 for each of the six-month periods ended February 28, 2017 and February 29, 2016. Accumulated amortization as of February 28, 2017 and August 31, 2016 was $37,500 and $33,750, respectively.

On May 15, 2014, we entered into a termination and non-assertion agreement with TSRL, Inc., pursuant to which the parties agreed to terminate an exclusive software licensing agreement entered into between the parties in 1997. As a result, the company obtained a perpetual right to use certain source code and data, and TSRL relinquished any rights and claims to any GastroPlus products and to any claims to royalties or other payments under that 1997 agreement. We agreed to pay TSRL total consideration of $6,000,000, which is being amortized over 10 years under the straight-line method. Amortization expense for each of the three-month periods ended February 28, 2017 and February 29, 2016 was $150,000 and was $300,000 for each of the six-month periods ended February 28, 2017 and February 29, 2016. Accumulated amortization as of February 28, 2017 and August 31, 2016 was $1,675,000 and $1,375,000, respectively.

Total amortization expense for intellectual property agreements for the three months ended February 28, 2017 and February 29, 2016 was $151,875, and total amortization expense for the six months ended February 28, 2017 and February 29, 2016 was $303,750. Accumulated amortization as of February 28, 2017 was $1,712,500 and $1,408,750 as of August 31, 2016.

Intangible assets

The Company acquired certain intangible assets as part of the acquisition of Cognigen Corporation on September 2, 2014. The following table summarizes those intangible assets as of February 28, 2017:

Amortization expense for each of the three-and six-month periods ended February 28, 2017 and February 29, 2016 was $36,875 and $73,750, respectively. According to policy in addition to normal amortization, these assets are tested for impairment as needed.

Earnings per Share

We report earnings per share in accordance with FASB ASC 260-10. Basic earnings per share is computed by dividing income available to common shareholders by the weighted-average number of common shares available. Diluted earnings per share is computed similar to basic earnings per share except that the denominator is increased to include the number of additional common shares that would have been outstanding if the potential common shares had been issued and if the additional common shares were dilutive. The components of basic and diluted earnings per share for the three and six months ended February 28, 2017 and February 29, 2016 were as follows:

Stock-Based Compensation

Compensation costs related to stock options are determined in accordance with FASB ASC 718-10, "Compensation-Stock Compensation", using the modified prospective method. Under this method, compensation cost is calculated based on the grant-date fair value estimated in accordance with FASB ASC 718-10, amortized on a straight-line basis over the options' vesting period. Stock-based compensation was $116,626 and $56,287 for the three months ended February 28, 2017 and February 29, 2016 respectively and $212,486 and $120,249 for the six months ended February 28, 2017 and February 29, 2016, respectively. This expense is included in the condensed consolidated statements of operations as Selling, General, and Administration (SG&A), and Research and Development expense.

Recently Issued Accounting Pronouncements

In May 2014, FASB issued Accounting Standards Update (ASU) No. 2014-09, Revenue from Contracts with Customers. The standard will eliminate the transaction- and industry-specific revenue recognition guidance under current U.S. GAAP and replace it with a principles-based approach for determining revenue recognition. ASU 2014-09 is effective for annual and interim periods beginning after December 15, 2017. Early adoption is permitted for years beginning after December 15, 2016. The revenue recognition standard is required to be applied retrospectively, including any combination of practical expedients as allowed in the standard. We are evaluating the impact, if any, of the adoption of ASU 2014-09 to our financial statements and related disclosures. The Company has not yet selected a transition method nor has it determined the effect of the standard on its ongoing financial reporting.

In November 2015, the FASB issued ASU No 2015-17, Income Taxes (Topic 740). The amendments in ASU 2015-17 change the requirements for the classification of deferred taxes on the balance sheet. Currently, GAAP requires an entity to separate deferred income tax liabilities and assets into current and noncurrent amounts in a classified statement of financial position. To simplify the presentation of deferred income taxes, the amendments in this ASU require that deferred tax liabilities and assets be classified as noncurrent in a classified statement of financial position. The pronouncement is effective for fiscal years and interim periods within those fiscal years beginning after December 15, 2016. Earlier application is permitted for all entities as of the beginning of an interim or annual reporting period. The Company early adopted ASU No. 2015-17 because it reduced complexity while maintaining the usefulness of the information. The retrospective application resulted in a reclassification of the current deferred tax asset at August 31, 2016 now being presented against the long term deferred tax liability.

In February 2016, the FASB issued ASU 2016-02, Leases (Topic 842), which supersedes existing guidance on accounting for leases in "Leases (Topic 840)" and generally requires all leases to be recognized in the consolidated balance sheet. ASU 2016-02 is effective for annual and interim reporting periods beginning after December 15, 2018; early adoption is permitted. The provisions of ASU 2016-02 are to be applied using a modified retrospective approach. The Company is currently evaluating the impact of the adoption of this standard on its consolidated financial statements.

In March 2016, the FASB issued ASU 2016-09, Improvements to Employee Share-Based Payment Accounting. This ASU affects entities that issue share-based payment awards to their employees. The ASU is designed to simplify several aspects of accounting for share-based payment award transactions that include - the income tax consequences, classification of awards as either equity or liabilities, classification on the statement of cash flows, and forfeiture rate calculations. ASU 2016-09 will become effective for the Company in the first quarter of fiscal 2019. Early adoption is permitted in any interim or annual period. The Company early adopted ASU No. 2016-09. The adoption had no material impact on the Company's financial statements.

NOTE 3: Property and Equipment

Property and equipment as of February 28, 2017 consisted of the following:

NOTE 4: CONTRACTS PAYABLE

TSRL

Pursuant to the termination and nonassertion agreement with TSRL (See note 2), the Company will pay TSRL $2,500,000 over a three-year period. The remaining payment of $1,000,000 will be made in April 2017.

NOTE 5: COMMITMENTS AND CONTINGENCIES

Employment Agreements

CEO Employment Agreement

In August 2014, we entered into an employment agreement with Mr. Woltosz for his services as our Chief Executive Officer, which was effective September 1, 2014 and continued until August 31, 2015 (the "September 2014 Agreement"). Under the terms of this employment agreement, Mr. Woltosz was required to devote a minimum of 60% of his productive time to performing the duties as our Chief Executive Officer. The agreement provided for an annual base salary of $180,000, an annual performance bonus of up to 5% of the Company's net income before taxes of the previous fiscal year, not to exceed $36,000, and the grant of an option to purchase six shares of the Company's common stock for each $1,000 of net income before taxes that the Company earns at the end of each fiscal year (up to a maximum of 12,000 shares over the term of the agreement) with an exercise price equal to 10% over the market value per share as of the date of grant. In August 2015 this agreement was renewed for another year on the same terms. Under his current employment agreement, we agreed to provide Mr. Woltosz, at 60% of our actual costs, with such health insurance and other benefits which are appropriate to his office and position, adequate to the performance of his duties and not inconsistent with that which we customarily provide to our other management employees. We also agreed to reimburse him for customary, ordinary, and necessary business expenses incurred in connection with the rendering of services. The agreement also provides that we may terminate the agreement without cause upon thirty (30) days written notice, and that upon any such termination our only obligation to Mr. Woltosz would be for a payment equal to the greater of (i) 12 months of salary or (ii) the amount of salary for the remainder of the term of the agreement from the date of notice of termination. Further, the agreement provides that we may terminate the agreement for "cause" (as defined in the agreement) and that our only obligation to Mr. Woltosz upon any such termination would be limited to the payment of Mr. Woltosz' salary and benefits through and until the effective date of any such termination.  On July 9, 2015, the Company entered into a new employment agreement with Mr. Woltosz for another year on the same terms as the September 2014 agreement. A copy of this agreement was filed as an exhibit to the Current Form on Form 8-K filed with the Securities and Exchange Commission on July 15, 2015. On August 8, 2016 the Company entered into a new employment agreement for another year on the same terms as the September 2014 agreement. A copy of this agreement was filed as an exhibit to the Current Form on Form 8-K filed with the Securities and Exchange Commission on August 11, 2016.

President's employment agreement

On September 2, 2014, Thaddeus H. Grasela, Jr., Ph.D., was appointed President of the Company and its wholly owned subsidiary Cognigen (also known as the Buffalo Division of the Company). The Company and Cognigen have entered into an Employment Agreement with Dr. Grasela (the "Grasela Employment Agreement") that has a three-year term. Pursuant to the Grasela Employment Agreement, Dr. Grasela receives an annual base salary of $250,000, is eligible to receive Company stock options under the 2007 Simulations Plus, Inc. Stock Option Plan, as determined by the Board, and is eligible to receive an annual performance bonus in an amount not to exceed 10% of salary to be determined by the Compensation Committee of the Board. The Compensation Committee awarded Dr. Grasela a $25,000 performance bonus in each of September 2015 and September 2016 for the 2015 and 2016 fiscal years, respectively.

License Agreement

The Company executed a royalty agreement with Accelrys, Inc. ("Accelrys") (the original agreement was entered into with Symyx Technologies in March 2010; Symyx Technologies later merged with Accelrys, Inc.) for access to their Metabolite Database for developing our Metabolite Module within ADMET Predictor™. The module was renamed the Metabolism Module when we released ADMET Predictor version 6 on April 19, 2012. Under this agreement, we pay a royalty of 25% of revenue derived from the sale of the Metabolism/Metabolite module to Accelrys. In 2014, Dassault Systemes of France acquired Accelrys and the Company now operates under the name BIOVIA. We incurred royalty expense of $42,024 and $35,288, respectively, and for the three months ended February 28, 2017 and February 29, 2016 respectively and $73,092 and $50,838 for the six months ended February 28, 2017 and February 29, 2016, respectively.

Income taxes

We follow guidance issued by the FASB with regard to our accounting for uncertainty in income taxes recognized in the financial statements. Such guidance prescribes a recognition threshold of more likely than not and a measurement process for financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. In making this assessment, a company must determine whether it is more likely than not that a tax position will be sustained upon examination, based solely on the technical merits of the position and must assume that the tax position will be examined by taxing authorities. Our policy is to include interest and penalties related to unrecognized tax benefits in income tax expense. Interest and penalties totaled $ -0- and $-0- for fiscal year 2016 and 2015, respectively. We file income tax returns with the IRS and various state jurisdictions and India. Our federal income tax returns for fiscal year 2012 thru 2015 are open for audit, and our state tax returns for fiscal year 2011 through 2015 remain open for audit. In addition our California tax return for the fiscal year 2007 and fiscal year 2008 remains open with regard to R&D tax credits as a result of a previous audit for which we received a letter from the California Franchise Tax Board stating that an audit will not be conducted for those years at this time; however it may be subject to future audit. In 2015 the Company was informed that the IRS was auditing the Company's tax return for 2014. This audit was completed during FY2016; there were no changes as a result of the audit.

Litigation

Except as described below, we are not a party to any legal proceedings and are not aware of any pending legal proceedings of any kind.

In June 2014, the Company was served with a complaint in a civil action entitled Sherri Winslow v. Incredible Adventures, Inc., et al. (Los Angeles Superior Court Case No. BC545789) alleging wrongful death and seeking unspecified damages arising out of a May 18, 2012 plane crash in the State of Nevada.  The Company's Chief Executive Officer owned the subject aircraft and is also a named defendant. The complaint alleged that the Company was the owner of the subject aircraft.   The Company denied all material allegations against it, including that it owns or has ever owned any interest in the subject aircraft. On November 25, 2014, the plaintiff and the Company signed a stipulation of dismissal pursuant to which the plaintiff agreed to dismiss the Company without prejudice. The Company planned to prepare a dismissal with prejudice to be signed on behalf of the plaintiff in the event the plaintiff did not discover evidence during a nine-month period to and including August 31, 2015, that justified bringing the Company back into the litigation. The Company did not receive notification of any such discovery and is in the process of preparing documents for the plaintiff's final dismissal with prejudice.

NOTE 6: SHAREHOLDERS' EQUITY

Dividend

The Company's Board of Directors declared cash dividends during fiscal years 2017 and 2016. The details of the dividends paid are in the following tables:

Stock Option Plan

In September 1996, the Board of Directors adopted, and the shareholders approved, the 1996 Stock Option Plan (the "Option Plan") under which a total of 1,000,000 shares of common stock had been reserved for issuance. In March 1999, the shareholders approved an increase in the number of shares that may be granted under the Option Plan to 2,000,000. In February 2000, the shareholders approved an increase in the number of shares that may be granted under the Option Plan to 4,000,000. In December 2000, the shareholders approved an increase in the number of shares that may be granted under the Option Plan to 5,000,000. Furthermore, in February 2005, the shareholders approved an additional 1,000,000 shares, resulting in the total number of shares that may be granted under the Option Plan to 6,000,000. The 1996 Stock Option Plan terminated in September 2006 by its term.

On February 23, 2007, the Board of Directors adopted, and the shareholders approved, the 2007 Stock Option Plan under which a total of 1,000,000 shares of common stock had been reserved for issuance. On February 25, 2014 the shareholders approved an additional 1,000,000 shares increasing the total number of shares that may be granted under the Option Plan to 2,000,000. This plan terminated in February 2017 by its term.

On December 23, 2016 the Board of Directors adopted, and on February 23, 2017 the shareholders approved, the 2017 Equity Incentive Plan under which a total of 1,000,000 shares of common stock has been reserved for issuance. This plan will terminate in December 2026. A copy of the 2017 Equity Incentive Plan is attached to this filing.

Qualified Incentive Stock Options (Qualified ISO)

As of February 28, 2017 employees hold Qualified ISO to purchase 1,286,272 shares of common stock at exercise prices ranging from $1.00 to $10.06.

Non-Qualified Stock Options (Non-Qualified ISO)

As of February 28, 2017 the outside members of the Board of Directors and certain employees hold non-qualified options to purchase 47,168 shares of common stock at exercise prices ranging from $4.46 to $10.06.

The weighted-average remaining contractual life of options outstanding issued under the Plan, both Qualified ISO and Non-Qualified SO, was 8.11 years at February 28, 2017. The exercise prices for the options outstanding at February 28, 2017 ranged from $1.00 to $10.06, and the information relating to these options is as follows:

NOTE 7: RELATED PARTY TRANSACTIONS

As of February 28, 2017, included in bonus expenses to officers was $30,500, of which $18,000 was an accrued bonus representing an estimated amount of bonus payable to our Chief Executive Officer, Walter Woltosz as part of his current employment agreement, and $12,500 accrued bonus representing as estimated amount of bonus payable to our President, Thaddeus Grasela as part of his current employment agreement.

NOTE 8: CONCENTRATIONS AND UNCERTAINTIES

Revenue concentration shows that international sales accounted for 36% and 42.6% of net sales for the six months ended February 28, 2017, and February 29, 2016, respectively. Four customers accounted for 7% (a dealer account in Japan representing various customers), 6%, 6%, and 6% of sales for the six months ended February 29, 2017. Three customers accounted for 10% (a dealer account in Japan representing various customers), 6%, and 6% of sales for the six months ended February 29, 2016.

Accounts receivable concentrations shows that two customers comprised 9.1% and 8.6% (a dealer account in Japan representing various customers) of accounts receivable at February 28, 2017, compared to two customers comprising 12% (a dealer account in Japan representing various customers) and 11% of accounts receivable at February 29, 2016.

We operate in the computer software industry, which is highly competitive and changes rapidly. Our operating results could be significantly affected by our ability to develop new products and find new distribution channels for new and existing products.

The majority of our customers are in the pharmaceutical industry. Consolidation and downsizing in the pharmaceutical industry could have an impact on our revenues and earnings going forward.

NOTE 9: SEGMENT AND Geographic Reporting

We account for segments and geographic revenues in accordance with guidance issued by the FASB. Our reportable segments are strategic business units that offer different products and services.

Results for each segment and consolidated results are as follows for the three and six months ended February 28, 2017 and February 29, 2016 (in thousands):

In addition, the Company allocates revenues to geographic areas based on the locations of its customers. Geographical revenues for the three months and six months ended February 28, 2017 and February 29, 2016 were as follows (in thousands):

NOTE 10: EMPLOYEE BENEFIT PLAN

We maintain a 401(K) Plan for all eligible employees, and we make matching contributions equal to 100% of the employee's elective deferral, not to exceed 4% of total employee compensation. We can also elect to make a profit-sharing contribution. Our contributions to this Plan amounted to $60,931 and $51,737 for the three months ended February 28, 2017 and February 29, 2016 respectively and $114,890 and $107,075 for the six months ended February 28, 2017 and February 29, 2016 respectively.

Item 2. Management's Discussion and Analysis or Plan of Operations

Forward-Looking Statements

This document and the documents incorporated in this document by reference contain forward-looking statements that are subject to risks and uncertainties. All statements other than statements of historical fact contained in this document and the materials accompanying this document are forward-looking statements.

The forward-looking statements are based on the beliefs of our management, as well as assumptions made by and information currently available to our management. Frequently, but not always, forward-looking statements are identified by the use of the future tense and by words such as "believes," expects," "anticipates," "intends," "will," "may," "could," "would," "projects," "continues," "estimates" or similar expressions. Forward-looking statements are not guarantees of future performance and actual results could differ materially from those indicated by the forward-looking statements. Forward-looking statements involve known and unknown risks, uncertainties, and other factors that may cause our or our industry's actual results, levels of activity, performance, or achievements to be materially different from any future results, levels of activity, performance, or achievements expressed or implied by the forward-looking statements.

The forward-looking statements contained or incorporated by reference in this document are forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended ("Securities Act") and Section 21E of the Securities Exchange Act of 1934, as amended ("Exchange Act") and are subject to the safe harbor created by the Private Securities Litigation Reform Act of 1995. These statements include declarations regarding our plans, intentions, beliefs, or current expectations.

Among the important factors that could cause actual results to differ materially from those indicated by forward-looking statements are the risks and uncertainties described under "Risk Factors" in our Annual Report and elsewhere in this document and in our other filings with the SEC.

Forward-looking statements are expressly qualified in their entirety by this cautionary statement. The forward-looking statements included in this document are made as of the date of this document and we do not undertake any obligation to update forward-looking statements to reflect new information, subsequent events, or otherwise.

General

BUSINESS

OVERVIEW

Simulations Plus, Inc., incorporated in 1996, is a premier developer of groundbreaking drug discovery and development software for mechanistic modeling and simulation, and for machine-learning-based prediction of properties of molecules solely from their structure, and is exploring the application of its machine-learning technologies in other industries, including aerospace/military and general healthcare. Our pharmaceutical/chemistry software is licensed to major pharmaceutical, biotechnology, agrochemical, and food industry companies and to regulatory agencies worldwide for use in the conduct of industry-based research. We also provide consulting services ranging from early drug discovery through preclinical and clinical trial data analysis and for submissions to regulatory agencies. Simulations Plus is headquartered in Southern California, with offices in Buffalo, New York, and its common stock trades on the NASDAQ Capital Market under the symbol "SLP."

In September 2014, Simulations Plus acquired Cognigen Corporation (Cognigen) as a wholly owned subsidiary pursuant to that certain Agreement and Plan of Merger, dated as of July 23, 2014, by and between Simulations Plus and Cognigen (the "Merger Agreement"). Cognigen was originally incorporated in 1992. Through the integration of Cognigen into Simulations Plus, Simulations Plus is now also a leading provider of population modeling and simulation contract research services for the pharmaceutical and biotechnology industries. Our clinical-pharmacology-based consulting services include pharmacokinetic and pharmacodynamic modeling, clinical trial simulations, data programming, and technical writing services in support of regulatory submissions. We have also developed software for harnessing cloud-based computing in support of modeling and simulation activities and secure data archiving, and we provide consulting services to improve interdisciplinary collaborations and research and development productivity.

We are a global leader focused on improving the ways scientists use knowledge and data to predict the properties and outcomes of pharmaceutical and biotechnology agents, and are one of only two global companies who provide a wide range of preclinical and clinical consulting services and software. Our innovations in integrating new and existing science in medicinal chemistry, computational chemistry, pharmaceutical science, biology, physiology, and machine learning into our software have made us the leading software provider for physiologically based pharmacokinetics (PBPK) modeling and simulation and for prediction of molecular properties from structure.

We generate revenue by delivering relevant, cost-effective software and creative and insightful consulting services. Pharmaceutical and biotechnology companies use our software programs and scientific knowledge to guide early drug discovery (molecule design and screening), preclinical, and clinical development programs. They also use it to enhance their understanding of the properties of potential new medicines and to use emerging data to improve formulations, select and justify dosing regimens, support the generics industry, optimize clinical trial design, and simulate outcomes in special populations, such as the elderly and pediatric patients.

PRODUCTS

General

We currently offer eight software products for pharmaceutical research and development: three simulation programs that provide time-dependent results based on solving large sets of differential equations: GastroPlus™; DDDPlus™; and MembranePlus™; three programs that are based on predicting and analyzing static (not time-dependent) properties of chemicals: ADMET Predictor™; MedChem Designer™; and MedChem Studio™ (the combination of ADMET Predictor, MedChem Designer, and MedChem Studio is called our ADMET Design Suite™); one recently-announced program for rapid clinical trial data analysis and regulatory submissions called PKPlus™; and one program called KIWI™ that provides an integrated platform for data analysis and reporting through our proprietary secure cloud.

GastroPlus

Our flagship product, and currently our largest source of revenue, is GastroPlus. GastroPlus simulates the absorption, pharmacokinetics, and pharmacodynamics of drugs administered to humans and animals, and is currently the most widely used software of its type by pharmaceutical companies, the U.S. Food and Drug Administration (FDA), the U.S. National Institutes of Health (NIH), and other government agencies in the U.S. and other countries. The FDA currently has 70 GastroPlus licenses.

Because of the widespread use of GastroPlus, we were the only non-European company invited to join the European Innovative Medicines Initiative (IMI) program for Oral Bioavailability Tools (OrBiTo). OrBiTo, begun in 2012, is an international collaboration among 27 industry, academic, and government organizations working in the area of oral absorption of pharmaceutical products. Because we are outside of the European Union, our participation in this project is at our own expense, while other members are compensated for their work; however, we are a full member with access to all of the data and discussions of all other members. We believe our investment to participate in this initiative enables us to benefit from, and to contribute to, advancing the prediction of human oral bioavailability from preclinical data, and ensures that we are well-known to member pharmaceutical companies and regulatory agencies.

In September 2016 we announced that Simulations Plus had been invited to join the European SimInhale Consortium and had been admitted to this prestigious group focused on advancing the state of the art for simulation of inhaled dosage forms. As one of only two U.S. participants, Simulations Plus is participating in activities designed to advance particle designs for improved deposition and interaction with lung tissue; promote realistic computer simulations of particle aerosolization, delivery, and deposition; promote patient-tailored inhaled medicines; promote integration of device and formulation design; and promote critical assessment of toxicity issues and related risks.

In September 2014, we entered into a research collaboration agreement (RCA) with the FDA to enhance the Ocular Compartmental Absorption and Transit (OCAT™) model within the Additional Dosing Routes Module of GastroPlus. The objective of this agreement is to provide a tool for generic companies and the FDA to assess the likely bioequivalence of generic drug formulations dosed to the eye. Under this RCA, we receive up to $200,000 per year. This RCA may be renewed for up to a total of three years based on the progress achieved during the project. After a successful second year, the RCA was renewed for its third year in September 2016, and will expire in September 2017.

We were awarded another RCA by the FDA in September 2015, this one to expand the capabilities of GastroPlus to simulate the dosing of long-acting injectable microspheres. This type of dosage form is usually injected via subcutaneous or intramuscular routes, but can also be used for ocular dosing. Once again, this RCA provides up to $200,000 per year for up to three years. Under this agreement, we are developing simulation models to deal with the very slow dissolution/decomposition of the microsphere carrier material that gradually releases the active drug over periods as long as weeks or months. After a successful first year, the RCA was renewed for the second year in September 2016, and will expire in September 2017 unless further renewed.

In addition to the two funded efforts with the FDA described above, we also have an unfunded RCA with the FDA's Office of Generic Drugs (OGD) that began in 2014. The objective of this RCA, which has a five-year term, is directed toward the FDA's evaluation of mechanistic IVIVCs ( in vitro-in vivo correlations) to determine whether mechanistic absorption modeling (MAM) can relate laboratory ( in vitro ) dissolution experiment results to the behavior of dosage forms in humans and animals ( in vivo ) better than traditional empirical methods.

In April 2017, we released Version 9.5 of GastroPlus after nearly two years of improvements over version 9.0, which was released in April 2015. Version 9.5 is now the largest single upgrade we've made to the program. New functionalities that we believe provide the most advanced decision-making tool for preclinical and early clinical trial simulation and modeling analysis available today include:

Our goal with GastroPlus is to integrate the most advanced science into user-friendly software to enable pharmaceutical researchers and regulators to perform sophisticated analyses of complex drug behaviors in humans and laboratory animals. Already the most widely used program in the world for physiologically based pharmacokinetics (PBPK), the addition of these new capabilities is expected to expand the user base in the early pharmaceutical research and development process, while also helping us further penetrate the biopharmaceuticals, food, cosmetics, and general toxicology markets.

DDDPlus

DDDPlus simulates in vitro (laboratory) experiments that measure the rate of dissolution of a drug and, if desired, the additives (excipients) in a particular dosage form (e.g., powder, tablet, capsule, or injectable solids) under a variety of experimental conditions. This unique software program is used by formulation scientists in industry and the FDA to (1) understand the physical mechanisms affecting the disintegration and dissolution rates of various formulations, (2) reduce the number of cut-and-try attempts to design new drug formulations, and (3) design in vitro dissolution experiments to better mimic in vivo (animal and human) conditions. Version 5.0 of DDDPlus, which added a number of significant enhancements, was released in April 2016. This version added new formulation types (controlled release bilayer tablet, delayed release coated tablet, and immediate release coated beads), expanded formulation specification options, biorelevant solubilities and surfactant effects on dissolution, tablet compression and disintegration models, links with GastroPlus, and updated licensing. Current improvements in development and testing include new capabilities to simulate in vitro dissolution experiments for long-acting injectable microspheres as part of our work under the FDA-funded grant mentioned above.

MembranePlus™

MembranePlus was released in October 2014. Similar to DDDPlus, MembranePlus simulates laboratory experiments, but in this case, the experiments are for measuring permeability of drug-like molecules through various membranes, including several different standard cell cultures (Caco-2, MDCK), as well as artificially formulated membranes (PAMPA). The value of such simulations derives from the fact that when the permeabilities of the same molecules are measured in different laboratories using (supposedly) the same experimental conditions, the results are often significantly different. These differences are caused by a complex interplay of factors in how the experiment was set up and run. MembranePlus simulates these experiments with their specific experimental details, and this enables scientists to better interpret how results from specific experimental protocols can be used to predict permeability in human and animals, which is the ultimate goal.

PKPlus™

On August 25, 2016, we announced the release of a new standalone software product called PKPlus, based on the internal PKPlus Module in GastroPlus that has been available since 2000. The PKPlus Module in GastroPlus provides quick and easy fitting of compartmental pharmacokinetic (PK) models as well as noncompartmental analysis (NCA) for intravenous and extravascular (oral, dermal, ocular, pulmonary, etc.) doses; however, the PKPlus Module in GastroPlus was not designed to meet all of the requirements for performing these analyses for Phase 2 and 3 clinical trials, nor to produce report-quality output for regulatory submissions. The new standalone PKPlus program has been developed to provide the full level of functionality needed by pharmaceutical industry scientists to perform the analyses and generate the outputs needed to fully satisfy regulatory agency requirements for both NCA and compartmental PK modeling. After receiving considerable feedback on version 1.0, we are modifying the program to include additional desired features requested by our users and potential users and expect to release the next version during the third fiscal quarter. We believe the potential number of eventual users for PKPlus is in the thousands world-wide and that it has the potential to eventually become one of our leading revenue producers.

ADMET Predictor™

ADMET (Absorption, Distribution, Metabolism, Excretion, and Toxicity) Predictor is a chemistry-based computer program that takes molecular structures (i.e., drawings of molecules represented in various formats) as inputs and predicts approximately 150 different properties for them at an average rate of over 100,000 compounds per hour on a modern laptop computer. This capability allows chemists to generate estimates for a large number of important molecular properties without the need to synthesize and test the molecules, as well as to generate estimates of unknown properties for molecules that have been synthesized, but for which only a limited number of experimental properties have been measured. Thus, a chemist can assess the likely success of a large number of existing molecules in a company's chemical library, as well as molecules that have never been made, by providing their molecular structures, either by drawing them using a tool such as our MedChem Designer software, or by automatically generating large numbers of molecules using various computer algorithms, including those embedded in our MedChem Studio software.

For many years, ADMET Predictor has been top-ranked for predictive accuracy in multiple peer-reviewed, independent comparison studies, while generating its results at a high throughput rate. Although the state of the art of this type of software does not enable identifying the best molecule in a series, it does allow early screening of molecules that are highly likely to fail as potential drug candidates (i.e., the worst molecules, which is usually the majority of a chemical library) before synthesizing and testing them. Thus, millions of virtual compounds can be created and screened in a day, compared to potentially months or years of work to actually synthesize and test a much smaller number of actual compounds.

The most recent release of ADMET Predictor, version 8.0, was released on August 1, 2016. This new version features a completely redesigned and modernized interface as well as a number of new capabilities to enhance the performance and user-friendliness of the program. In addition, we have integrated a number of MedChem Studio features into the new ADMET Predictor, and created a tighter integration between the two programs when a MedChem Studio license is obtained along with an ADMET Predictor license.

The optional ADMET Modeler™ Module in ADMET Predictor enables scientists to use their own experimental data to quickly create proprietary high-quality predictive models using the same powerful machine-learning methods we use to build our top-ranked property predictions. Pharmaceutical companies expend substantial time and money conducting a wide variety of experiments on new molecules each year, generating large databases of experimental data. Using this proprietary data to build predictive models can provide a second return on their investment; however, model building has traditionally been a difficult and tedious activity performed by specialists. The automation in ADMET Modeler makes it easy for a scientist to create very powerful models with minimal training.

We released version 8.1 in January 2017. This new release includes:

Potential new markets for machine learning

We are currently investigating applications of our sophisticated machine-learning engine outside of our normal pharmaceutical markets. To date, we have conducted several proof-of-concept studies including: (1) building predictive models for missile aerodynamic force and moment coefficients as a function of missile geometry, Mach number, and angle of attack, (2) classifying/identifying missiles and other objects from radar tracking data, (3) mapping jet engine compressor performance to predict when maintenance might be required, and (4) classifying patients as healthy or experiencing some disease state or genetic disorder evidenced by magnetic resonance imaging (MRI) of the brain. Other potential applications for this modeling engine have also been identified; however, our focus to date has been primarily in these areas.

We believe our proprietary machine-learning software engine has a wide variety of potential applications and we intend to pursue funding to develop customized tools to further monetize our investment in this technology by expanding our markets beyond the life sciences and chemistry. In addition, we are examining a variety of expanded capabilities to add to the basic modeling engine to accommodate even larger data sets ("big data analytics") and new applications.

MedChem Designer™

MedChem Designer was launched in 2011. It was initially a molecule-drawing program, or "sketcher", but now has capabilities exceeding those of other molecule-drawing programs because of its integration with both MedChem Studio and ADMET Predictor. We provide MedChem Designer for free because we believe that in the long run it will help to increase demand for ADMET Predictor and MedChem Studio, and because most other existing molecule-drawing programs are also provided for free. Our free version includes a small set of ADMET Predictor's best-in-class property predictions, allowing the chemist to modify molecular structures and then see a few key properties very quickly. With a paid ADMET Predictor license, the chemist would see the entire approximately 150 predictions that are available. Over 16,000 copies of MedChem Designer have been downloaded by scientists around the world to date.

When used with a license for ADMET Predictor, MedChem Designer becomes a de novo molecule design tool. With it, a researcher can draw one or more molecular structures, then click on the ADMET Predictor icon and have approximately 150 properties for each structure calculated in seconds, including our proprietary ADMET Risk index. Researchers can also click on an icon to generate the likely metabolites of a molecule and then predict all of the properties of those metabolites from ADMET Predictor, including each of their ADMET Risk scores. This is important because a metabolite of a molecule can be therapeutically beneficial (or harmful) even though the parent molecule is not.

Our proprietary ADMET Risk score provides a single number that tells the chemist how many default threshold values for various predicted properties were crossed (or violated) by each structure. Thus, in a single number, the chemist can instantly compare the effects of different structural changes in many dimensions. The ideal score is zero; however, a low score greater than zero might be acceptable, depending on what property(s) caused the points to be assigned. If the number is too high (greater than 5 or 6), the molecule is not likely to be successful as a drug. The default rules can be modified and new rules can be added by the user to include any desired rule set based on any combination of calculated descriptors, predicted properties, and user inputs. As chemists attempt to modify structures to improve one property, they often cause others to become unacceptable. Without ADMET Risk, the chemist would have to individually examine many key properties for each new molecule (and its metabolites) to determine whether any of them became unacceptable as a result of changing the structure.

MedChem Studio™

MedChem Studio is a powerful software tool that is used both for data mining and for de novo design of new molecules. In its data-mining role, MedChem Studio facilitates searching large chemical libraries to find molecules that contain identified substructures, and it enables rapid identification of clusters (classes) of molecules that share common substructures. MedChem Studio version 4.0 was released during fiscal year 2014. We have now merged MedChem Studio with the refactoring of ADMET Predictor 8.0, so that either program can be entered through the same interface, and the communication between the two programs is enhanced through the seamless integration of both technologies. We believe this will enhance the attractiveness of both ADMET Predictor and MedChem Studio to medicinal and computational chemists.

While MedChem Designer can be used to refine a small number of molecules, MedChem Studio can be used to create and screen (with ADMET Predictor) very large numbers of molecules down to a few promising lead candidates. MedChem Studio has features that enable it to generate new molecular structures using a variety of de novo design methods. When MedChem Studio is used with ADMET Predictor and MedChem Designer (the combination of which we refer to as our ADMET Design Suite), we believe the programs provide an unmatched capability for chemists to search through large libraries of compounds that have undergone high-throughput screening experiments to find the most promising classes (groups of molecules with a large common part of their structures) and molecules that are active against a particular target. In addition, MedChem Studio can take an interesting (but not acceptable) molecule and, using a variety of design algorithms, quickly generate many thousands to millions of high quality analogs (similar new molecules). These molecules can then be screened using ADMET Predictor to find molecules that are predicted to be both active against the target and acceptable in a variety of ADMET properties. We demonstrated the power of the ADMET Design Suite during two NCE (new chemical entity) projects wherein we designed lead molecules to inhibit the growth of the plasmodium falciparum malaria parasite in one study and lead molecules that were combined COX-1 and COX-2 inhibitors. In each case, we announced ahead of time that we were attempting to do this, and we reported the results when the projects were complete. Every molecule we designed and had synthesized hit their targets in both projects.

KIWI TM

Drug development programs rely increasingly on modeling and simulation analyses to support decision-making and submissions to regulatory agencies. To ensure high-quality analyses, organizations must not only apply high-quality science, but must also be able to support the science by being able to validate the results. KIWI is a cloud-based web application that was developed to efficiently organize, process, maintain, and communicate the volume of data and results generated by pharmacologists and scientists over the duration of a drug development program. The validated workflow and tools within KIWI promote traceability and reproducibility of results.

The pharmaceutical industry has been rapidly adopting cloud technology as a solution to ever-expanding computer processing needs. Leveraging our 20-plus years of experience in providing an architecture supporting modeling and simulation efforts, we have developed KIWI as a secure, validated, enterprise-scale environment, enabling global teams to collaborate on model-based decision making. KIWI has proven to be a valuable platform for encouraging interdisciplinary discussions about the model development process and interpretation of results. We continue to receive positive feedback about the functionality implemented in KIWI and the value of the approach we have taken to harness cloud technology. We continue to improve functionality and collaboration within the KIWI platform, and we expect the licensing fee will be a source of recurring revenue for further development and growth. KIWI Version 1.3 was released in May 2015. This version of KIWI provides our user community with access to new features that accelerate completion of modeling projects by decreasing run times and facilitating the comparison and exporting of results across models. These features include dynamic comparisons of model parameter estimates and diagnostic plots, export of model run records for regulatory submissions, and accelerated infrastructure with the upgrade to the latest versions of NONMEM® and Perl-speaks-NONMEM running in a 64-bit Linux environment.

KIWI Version 1.6 was released in September 2016. This new version introduced major enhancements in the functionality of visualization tools offered by the platform. These enhancements include simplifying the creation of plots and comparing them across multiple models, thus accelerating the model refinement process. In addition, analysts can now conveniently copy visualization preferences across projects, improving consistency and facilitating collaboration and communication with clients and colleagues.

Contract Research and Consulting Services

Our scientists and engineers have expertise in drug absorption via various dosing routes (oral, intravenous, ocular, nasal/pulmonary, and dermal), pharmacokinetics, and pharmacodynamics. They have been speakers or presenters at over 150 scientific meetings worldwide in the past four years. We frequently conduct contracted consulting studies for large customers (including the five largest pharmaceutical companies) who have particularly difficult problems and who recognize our expertise in solving them, as well as for smaller customers who prefer to have studies run by our scientists rather than to license our software and train someone to use it. The demand for our consulting services has been steadily increasing, and we have expanded our consulting teams to meet the increased workload.

We continue working on a five-year consulting agreement with a major research foundation to implement a platform for coordinating the data generated by global teams engaged in model-based drug development.

We currently are working with the FDA on three different Research Collaboration Agreements (RCAs): two funded efforts for the ocular model and long-acting injectable microspheres and the unfunded IVIVC effort, all described above under "GastroPlus". We also successfully completed the fifth year of our five-year renewable collaboration with the Center for Food Safety and Nutrition of the FDA to develop predictive toxicity models for food additives and contaminants.

Pharmacometric Modeling

We have a reputation for high-quality analyses and regulatory reporting of data collected during preclinical experiments as well as clinical trials of new and existing pharmaceutical products, typically working on 30-40 drug projects per year. The model-based analysis of clinical trial data that we perform is different from the modeling analysis offered by GastroPlus; the former relies more on statistical and semi-mechanistic models, whereas the latter relies on very detailed mechanistic models. Statistical models rely on direct observation and mathematical equations that are used to fit data collected across multiple studies along with describing the variability within and between patients. Mechanistic models are based on a detailed understanding of the human body and the chemistry of the drug and involve mathematical and scientific representation of the phenomena involved in drug dissolution/precipitation, absorption, distribution, metabolism, and elimination. Collectively, the models guide drug formulation design and dose selection.

Because of the synergies achieved through the integration of our Buffalo division (Cognigen) into Simulations Plus, our first full fiscal year of combined operations resulted in significantly increased revenues and earnings. Our clinical pharmacometricians in Buffalo, supported by our consulting team in California, are learning to use the PBPK modeling capabilities of GastroPlus and are performing such studies under new and expanded contracts with pharmaceutical customers.

PRODUCT DEVELOPMENT

Development of our software is focused on expanding product lines, designing enhancements to our core technologies, and integrating existing and new products into our principal software architecture and platform technologies. We intend to continue to offer regular updates to our products and to continue to look for opportunities to expand our existing suite of products and services.

To date, we have developed products internally, sometimes also licensing or acquiring products, or portions of products, from third parties. These arrangements sometimes require that we pay royalties to third parties. We intend to continue to license or otherwise acquire technology or products from third parties when it makes business sense to do so. We currently have one license agreement, with BIOVIA, a San Diego division of Dassault Systemes in France (formerly known as Accelrys, Inc.), pursuant to which a small royalty is paid to BIOVIA from revenues on each license for the Metabolite module in ADMET Predictor. This license agreement continues in perpetuity and either party has the right to terminate it.

In 1997 we entered into an exclusive software licensing agreement with TSRL, Inc. (aka Therapeutic Systems Research Laboratories) (TSRL), pursuant to which TSRL licensed certain software technology and databases to us, and we paid royalties to TSRL. On May 15, 2014, we and TSRL entered into a termination and non-assertion agreement pursuant to which the parties agreed to terminate the 1997 exclusive software licensing agreement. As a result, the Company obtained a perpetual right to use certain source code and data, and TSRL relinquished any rights and claims to any GastroPlus products and to any claims to royalties or other payments under that agreement, and we agreed to pay TSRL total consideration of $6,000,000 as follows: (a) $3,500,000 by May 20, 2014, which amount was comprised of $2,500,000 in cash and $1,000,000 worth of our common stock (which was 164,745 shares based upon the April 25, 2014 closing price per share of $6.07 per share), (b) $750,000 payable on or before April 25, 2015, (c) $750,000 payable on or before April 25, 2016, and (d) $1,000,000 payable on or before April 25, 2017. All payments have now been made except the final $1 million, which will be paid in April 2017. Our outstanding payment obligation described above is non-interest-bearing and will be amortized at a constant rate of $150,000 per quarter until it is completely amortized, after which no further expense will be incurred. For most quarters, we expect that this will result in a savings over the royalty payments that would have been paid to TSRL if paid consistent with past practices.

MARKETING AND DISTRIBUTION

We distribute our products and offer our services in North America, South America, Europe, Japan, Australia, New Zealand, India, Singapore, Taiwan, and the People's Republic of China.

We market our pharmaceutical software and consulting services through attendance and presentations at scientific meetings, exhibits at trade shows, seminars at pharmaceutical companies and government agencies, through our website, and using various communication channels to our database of prospects and customers. At various scientific meetings around the world each year there are numerous presentations and posters presented in which the reported research was performed using our software. Many of these presentations are from industry and FDA scientists; some are from our staff. In addition, more than 50 peer-reviewed scientific journal articles, posters, and podium presentations are typically published each year using our software, mostly by our customers, further supporting its use in a wide range of preclinical and clinical studies.

Our sales and marketing efforts are handled primarily internally with our scientific team and several senior management staff assisting our marketing and sales staff with trade shows, seminars, and customer trainings both online and on-site. We believe that this is more effective than a completely separate sales team for several reasons: (1) customers appreciate talking directly with software developers and consulting scientists who can answer a wide range of in-depth technical questions about methods and features; (2) our scientists and engineers gain an appreciation for the customer's environment and problems; and (3) we believe the relationships we build through scientist-to-scientist contact are stronger than relationships built through salesperson-to-scientist contacts. We also have one independent distributor in Japan and two independent representatives in China who also sell and market our products with support from our scientists and engineers.

We provide support to the GastroPlus User Group in Japan, which was organized by Japanese researchers in 2009. In early 2013, a group of scientists in Europe and North America organized another group following the example set in Japan. Over 850 members have joined this group to date. We support this group through coordination of online meetings each month and managing the user group web site for exchange of information among members. These user groups provide us valuable feedback with respect to desired new features and suggested interface changes.

PRODUCTION

Our pharmaceutical software products are designed and developed by our development teams in California and New York, with locations in Lancaster, Petaluma, San Jose, San Diego, and Buffalo. In addition, we have one team member working out of North Carolina and our Chief Executive Officer works primarily from Auburn, Alabama. Our products and services are now delivered electronically – we no longer provide CD-ROMs and printed manuals or reports.

COMPETITION

In our pharmaceutical software and services business, we compete against a number of established companies that provide screening, testing and research services, and products that are not based on simulation software. There are also software companies whose products do not compete directly with, but are sometimes closely related to, ours. Our competitors in this field include some companies with financial, personnel, research, and marketing resources that are larger than ours. Our management believes there is currently no significant competitive threat to GastroPlus; however, in spite of a high barrier to entry, one could be developed over time. Our new PKPlus software product will compete with one major and a few minor software programs; however, the capabilities and design features of PKPlus, along with more affordable licensing, are expected to generate significant interest. MedChem Studio, MedChem Designer, and ADMET Predictor/ADMET Modeler operate in a more competitive environment. Several other companies presently offer simulation or modeling software, or simulation-software-based services, to the pharmaceutical industry.

Major pharmaceutical companies conduct drug discovery and development efforts through their internal development staffs and through outsourcing. Smaller companies generally need to outsource a greater percentage of this research. Thus, we compete not only with other software suppliers, but also with the in-house development teams at some of the larger pharmaceutical companies.

Although competitive products exist, both new licenses and license renewals for GastroPlus have continued to grow. We believe that we enjoy a dominant market share in this segment. We believe our ADMET Predictor/ADMET Modeler, MedChem Studio, MedChem Designer, DDDPlus, MembranePlus, PKPlus, and KIWI software offerings are each unique in their combination of capabilities and we intend to continue to market them aggressively.

We believe the key factors in our ability to successfully compete in this field are our ability to: (1) continue to invest in research and development, and develop and support industry-leading simulation and modeling software and related products and services to effectively predict activities and ADMET-related behaviors of new drug-like compounds, (2) design new molecules with acceptable activity and ADMET properties, (3) develop and maintain a proprietary database of results of physical experiments that serve as a basis for simulated studies and empirical models, (4) attract and retain a highly skilled scientific and engineering team, (5) aggressively our products and services to our global market, and (6) develop and maintain relationships with research and development departments of pharmaceutical companies, universities, and government agencies.

In addition, we actively seek strategic acquisitions to expand the pharmaceutical software and services business and to explore opportunities in aerospace and general healthcare.

STRATEGY

Our business strategy is to do the things we need to do to promote growth both organically (i.e., by expanding our current products and services through in-house efforts) and by acquisition. We believe in the "Built to Last" approach - that the fundamental science and technologies that underlie our business units are the keys both to improving our existing products and to expanding the product line with new products that meet our various customers' needs. We believe the continued growth of our pharmaceutical software and services business segment is the result of steadily increasing adoption of simulation and modeling software tools across the pharmaceutical industry, as well as the world-class expertise we offer as consultants to assist companies involved in the research and development of new medicines. We have received a continuing series of study contracts with pharmaceutical companies ranging from several of the largest in the world to a number of medium-sized and smaller companies in the U.S. and Europe.

In the fiscal year ended August 31, 2016 we distributed $0.20 per share in dividends to our shareholders. In November 2016 and February 2017 we distributed a quarterly dividends of $0.05 per share. We anticipate future dividends to be at least $0.05 per share per quarter; however, there can be no assurances that such dividends will be distributed, or if so, whether the amounts will be more, less, or the same as expected. The Board of Directors must approve each quarterly dividend distribution and may decide to increase, decrease, or eliminate dividend distributions at any time.

Results of Operations

Comparison of Three Months Ended February 28, 2017 and February 29, 2016.

The following table sets forth our condensed statements of operations (in thousands) and the percentages that such items bear to net sales (because of rounding, numbers may not foot):

Net Revenues

Consolidated net revenues increased by 10.5% or $542,000 to $5.706 million in the second fiscal quarter of Fiscal Year 2017 ("2QFY17") from $5.164 million in the second fiscal quarter of Fiscal Year 2016 ("2QFY16"). This net increase was due to a $394,000 increase in revenues generated by our Lancaster Division, representing a 10.8% increase over 2QFY16. We saw an increase of $148,000 or 9.7% in revenues of our Buffalo Division to $1.664 million in 2QFY17 from $1.516 million in 2QFY16. Consolidated software and software-related sales increased $297,000 or 8.4%, while consolidated consulting and analytical study revenues increased $245,000 or 14.9% over 2QFY16.

Cost of Revenues

Consolidated cost of revenues increased by $290,000, or 23.0%, in 2QFY17 to $1.554 million from $1.264 million in 2QFY16. Cost of Revenues as a percentage of revenue increased by 2.76% in 2QFY17 to 27.2% as compared to 24.5% in 2QFY16. $137,000 of the increased costs are allocated labor related to increased studies and contracts, $40,000 of increased costs associated with training programs presented in 2QFY17, increased software amortization of $42,000, and $65,000 of direct contract related expenses.

Gross Profit

Consolidated gross profits increased $252,000 or 6.5%, to $4.152 million in 2QFY17 from $3.900 million in 2QFY16. Our Lancaster Division accounted for a $256,000 increase, which came mainly from increased software license sales and related study revenues, while our Buffalo Division showed a slight decrease of $4,000. Consolidated Gross profit as a percentage of revenues decreased 2.3 to 72.8% in 2QFY17 from 75.5% in 2QFY16.

Selling, General and Administrative Expenses

Selling, general, and administrative (SG&A) expenses increased $225,000, or 13.1%, to $1.948 million in 2QFY17, from $1.723 million in 2QFY16.

The major increases in SG&A expenses this year compared to last year were:

The major decreases in SG&A expenses this year compared to last year were:

Research and Development

Total research and development cost decreased $52,000 in 2QFY17 compared to 2QFY16. In 2QFY17 we incurred approximately $758,000 of research and development costs, of which $350,000 was capitalized and $409,000 was expensed. In 2QFY16 we incurred approximately $739,000 of research and development costs, of which $278,000 was capitalized and $461,000 was expensed.

Other income (expense)

Other income (expense) was a net expense of $10,000 in 2QFY17 compared to an expense of $24,000 in 2QFY16. Foreign currency exchange accounted for $14,000 of increased income. The change is mainly due to the dollar strengthening in relation to the Japanese yen.

Provision for Income Taxes

The provision for income taxes was $589,000 for 2QFY17 compared to $547,000 for 2QFY16. Our effective tax rate increased to 33.1% in 2Q17from 32.3% in 2QFY16. This increase is a result of the anticipated lower effect of tax credits on earnings in 2QFY17.

Net Income

Net income increased by $50,000 or 4.4%, in 2QFY17 to $1.196 million from $1.145 million in 2QFY16. Net earnings from our Lancaster division were up $62,000 or 6.2% to $1.056 million in 2QFY17. Net earnings for our Buffalo division decreased by $12,000 or 7.6% to $140,000 in 2QFY17.

Comparison of Six Months Ended February 28, 2017 and February 29, 2016

The following table sets forth our condensed statements of operations (in thousands) and the percentages that such items bear to net sales (because of rounding, numbers may not foot):

Net Revenues

Consolidated net revenues increased by 11.2% or $1.121 million to $11.124 million in the first six months of Fiscal Year 2017 ("6moFY17") from $10.002 million in the first six months of Fiscal Year 2016 ("6moFY16). $442,000 of this increase was from revenues generated by our Buffalo Division, representing a 15% increase over 6moFY16. Net revenues of the Lancaster Division increased $679,000, or 9.6%, to $7.738 million for 6moFY17 from $7.058 million in 6moFY15. Consolidated software and software-related sales increased $528,000, or 7.9%, in 6moFY17, while consolidated consulting and analytical study revenues increased $593,000, or 18.0%, over 6moFY16.

Cost of Revenues

Consolidated cost of revenues increased by $542,000 in 6moFY17 to $2.890 million from $2.347 million in 6moFY16. The increase came mainly from $262,000 of the increased costs are allocated labor related to increased studies and contracts, $83,000 of increased costs associated with training programs, increased software amortization of $79,000, and $105,000 of direct contract-related expenses. Consolidated cost of revenues as a percentage of revenue increased from 23.5% in 6moFY16 to 27.2% in 6moFY17.

Gross Profit

Consolidated gross profit increased $578,000 or 7.6%, to $8.234 million in 6moFY17 from $7.655 million in 6moFY16. $162,000 of this increase in gross margin is from our Buffalo Division, which showed a 56.3% gross margin on $3.386 million in revenues for 6moFY17. Our Lancaster Division accounted for $416,000 of the increase showing an 81.8% gross margin for the six-month period.

Selling, General and Administrative Expenses

Selling, general, and administrative (SG&A) expenses increased $412,000 or 12.1%, to $3.811 million in 6moFY17 from $3.399 million in 6moFY16.

The major decreases in SG&A expenses this year compared to last year were:

Research and Development

We incurred approximately $1.28 million of research and development costs during 6moFY17. Of this amount, $584,000 was capitalized software development costs and $699,000 was expensed. We incurred approximately $1.36 million of research and development costs during 6moFY16. Of this amount, $545,000 was capitalized software development costs and $813,000 was expensed.

Other income (expense)

Other income increased $63,000 in 6moFY17 and showed income of $29,000 in 6moFY17compared to an expense of $34,000 in 6MoFY16. Foreign currency exchange gains accounted for this change due to the dollar strengthening in relation to the Japanese yen.

Provision for Income Taxes

The provision for income taxes was $1,195,000 for 6moFY17 compared to $1,157,000 for 6moFY16. Our effective tax rate decreased to 31.9% in 6moFY17 down from 34.0% in 6moFY16 due mainly to the effect of stock-based compensation.

Net Income

Net income increased by $306,000, or 13.6%, to $2.557 million in 6moFY17 from $2.252 million in 6moFY16. The increase comes from revenue growth in both divisions of the Company. Net earnings from our Lancaster division were up $224,000 or 11.7% to $2.136 million in 6moFY17 from $1.912 million in 6moFY16. Net earnings for our Buffalo division increased by $82,000 or 24.2% to $421,000 in 6moFY17 from $224,000 in 6moFY16.

Liquidity and Capital Resources

Our principal sources of capital have been cash flows from our operations. We have achieved continuous positive operating cash flow over the last nine fiscal years. We believe that our existing capital and anticipated funds from operations will be sufficient to meet our anticipated cash needs for working capital and capital expenditures for the foreseeable future. Thereafter, if cash generated from operations is insufficient to satisfy our capital requirements, we may open a revolving line of credit with a bank, or we may have to sell additional equity or debt securities or obtain expanded credit facilities. In the event such financing is needed in the future, there can be no assurance that such financing will be available to us, or, if available, that it will be in amounts and on terms acceptable to us. If cash flows from operations became insufficient to continue operations at the current level, and if no additional financing was obtained, then management would restructure the Company in a way to preserve its pharmaceutical business while maintaining expenses within operating cash flows.

Item 3. Quantitative and Qualitative Disclosures about Market Risk

As of February 28, 2017 and August 31, 2016, we had cash and cash equivalents of $7.43 million and $8.03 million, respectively. We do not hold any investments that are exposed to market risk related to changes in interest rates, which could adversely affect the value of our assets and liabilities, and we do not hold any instruments for trading purposes and investment. Some of our cash and cash equivalents are held in money market accounts; however, they are not exposed to market rate risk.

In the three months and six months ended February 28, 2017 and February 29, 2016 we sold $561,000 and $538,000, and $973,000 and $1,263,000, respectively, of software through representatives in certain Asian markets in local currencies. As a result, our financial position, results of operations, and cash flows can be affected by fluctuations in foreign currency exchange rates, particularly fluctuations in the yen and RMB exchange rates. These transactions give rise to receivables that are denominated in currencies other than the entity's functional currency. The value of these receivables is subject to changes because the receivables may become worth more or less due to changes in currency exchange rates. The majority of our software license agreements are denominated in U.S. dollars. We record foreign gains and losses as they are realized. We mitigate our risk from foreign currency fluctuations by adjusting prices in our foreign markets on a periodic basis. We base these changes on market conditions while working closely with our representatives. We do not hedge currencies or enter into derivative contracts.

Item 4. Controls and Procedures

Our management, with the participation of our Chief Executive Officer and our Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures as of February 28, 2017. The term "disclosure controls and procedures," as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act, means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC's rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company's management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. Management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the cost-benefit relationship of possible controls and procedures. Based on this evaluation, management concluded as of February 28, 2017, that our disclosure controls and procedures were effective.

Changes in Internal Control over Financial Reporting

During the quarter ended February 28, 2017 we continued to take steps and additional measures to remediate the underlying causes of the material weaknesses related to Information Technology General Controls identified in our annual report for the year ended August 31, 2016, including enhancing our internal documentation and monitoring approach to ensure that all GITC procedures designed to restrict access to applications and data are operating in an optimal manner in order to provide management with comfort that access is properly limited to the appropriate internal personnel. Management implemented and tested substantially all remedial steps during the six months ended February 28, 2017.

Our management, including our CEO, president, and CFO, do not expect that our disclosure controls or internal controls over financial reporting will prevent all errors or all instances of fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system's objectives will be met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within our company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple errors or mistakes. Controls can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based in part upon certain assumptions about the likelihood of future events, and any design may not succeed in achieving its stated goals under all potential future conditions. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures. Because of the inherent limitation of a cost-effective control system, misstatements due to error or fraud may occur and not be detected.

Part II. Other Information

Except as described below, we are not a party to any legal proceedings and are not aware of pending legal proceedings of any kind.

In June 2014, the Company was served with a complaint in a civil action entitled Sherri Winslow v. Incredible Adventures, Inc., et al. (Los Angeles Superior Court Case No. BC545789) alleging wrongful death and seeking unspecified damages arising out of a May 18, 2012 plane crash in the State of Nevada.  The Company's Chief Executive Officer owns the subject aircraft and is also a named defendant. The complaint alleged that the Company was the owner of the subject aircraft.   The Company denied all material allegations against it, including that it owns or has ever owned any interest in the subject aircraft. On November 25, 2014, the plaintiff and the Company signed a stipulation of dismissal pursuant to which the plaintiff agreed to dismiss the Company without prejudice.  The Company planned to prepare a dismissal with prejudice to be signed on behalf of the plaintiff in the event the plaintiff did not discover evidence during a nine-month period to and including August 31, 2015 that justified bringing the Company back into the litigation. The Company did not receive notification of any such discovery and is in the process of preparing documents for the plaintiff's final dismissal with prejudice.

You should carefully consider the risks described below before investing in our publicly traded securities. The risks described below are not the only ones facing us. Our business is also subject to the risks that affect many other companies, such as competition, technological obsolescence, labor relations, general economic conditions, geopolitical changes, and international operations. We operate in a rapidly changing environment that involves a number of risks, some of which are beyond our control. Additional risks not currently known to us or that we currently believe are immaterial also may impair our business operations and our liquidity. The risks described below could cause our actual results to differ materially from those contained in the forward-looking statements we have made in this Quarterly Report on Form 10-Q, the information incorporated herein by reference, and those forward-looking statements we may make from time to time. We note these factors for investors as permitted by the Private Securities Litigation Reform Act of 1995. You should understand that it is not possible to predict or identify all such factors. Consequently, you should not consider the following to be a complete discussion of all potential risks or uncertainties.

Risks Relating to the Pending Transactions

None pending

Certain Risks Related to Our Marketplace and Environment

Certain Risks Related to Our Operations

1. Errors or omissions in reporting of study detail in preclinical studies that may lead to inaccurate reports, which may undermine the usefulness of a study or data from the study, or which may potentially advance studies absent the necessary support or inhibit studies from proceeding to the next level of testing; and

2. Risks associated with our possible failure to properly care for our clients' property, such as research models, records, work in progress, or other archived materials.

Contractual risk transfer indemnifications generally do not protect us against liability arising from certain of our own actions, such as negligence or misconduct. We could be materially and adversely affected if we are required to pay damages or bear the costs of defending any claim that is outside any contractual indemnification provision, or if a party does not fulfill its indemnification obligations, or the damage is beyond the scope or level of insurance coverage. We also often contractually indemnify our clients (subject to a limitation of liability), similar to the way they indemnify us, and we may be materially adversely affected if we have to fulfill our indemnity obligations. Furthermore, there can be no assurance that we nor a party required to indemnify us will be able to maintain such insurance coverage (either at all or on terms acceptable to us).

Some of the same risks exist when we decide to sell a business, site, or product line. In addition, divestitures could involve additional risks, including the following: difficulties in the separation of operations, services, products, and personnel; and the need to agree to retain or assume certain current or future liabilities in order to complete the divestiture. We evaluate the performance and strategic fit of our businesses. These and any divestitures may result in significant write-offs, including those related to goodwill and other intangible assets, which could have an adverse effect on our results of operations and financial condition. In addition, we may encounter difficulty in finding buyers or alternative exit strategies at acceptable prices and terms and in a timely manner. We may not be successful in managing these or any other significant risks that we encounter in divesting a business, site, or product line, and as a result, we may not achieve some or all of the expected benefits of the divestitures.

In recent years, the stock market in general, and the market for technology-related companies in particular, has experienced wide price and volume fluctuations. This volatility has had a significant impact on the market price of securities issued by many companies, including companies in our industry. The price of our common stock could fluctuate based upon factors that have little to do with our performance, and these fluctuations could materially reduce our stock price.

In the past, some companies, including companies in our industry, have had volatile market prices for their securities and have had securities class action suits filed against them. The filing of a lawsuit against us, regardless of the outcome, could have a material adverse effect on our business, financial condition, and results of operations, as it could result in substantial legal costs and a diversion of our management's attention and resources.

None.

None.

N/A

N/A

SIGNATURES

In accordance with Section 13 or 15 (d) of the Securities Exchange Act of 1934, the Registrant caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, in the City of Lancaster, State of California, on April 10, 2017.