The Quarterly
AMTY 2012 10-K

Amerityre Corp (AMTY) SEC Annual Report (10-K) for 2012

AMTY 2013 10-K
AMTY 2012 10-K AMTY 2013 10-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

Form 10-K

(Mark One)

x

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended June 30, 2012

OR

o

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from  to

Commission file number    000-50053

AMERITYRE CORPORATION

(Exact name of registrant as specified in its charter)


Nevada

(State or other jurisdiction of

incorporation or organization)

87-0535207

(I.R.S. Employer

Identification No.)

1501 Industrial Road

Boulder City, Nevada 89005

(702) 293-1930

 (Address of principal executive office and telephone number)


Securities registered pursuant to Section 12(b) of the Exchange Act:


Title of each class

Name of each exchange on which registered

N/A

N/A


Securities registered pursuant to Section 12(g) of the Exchange Act: Common Stock

Table of Contents


Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. YES  o   NO  x

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. YES  o   NO  x


Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. YES  x   NO  o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    YES   x     NO   o


Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x


Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.


Large accelerated filer   ¨       Accelerated filer ¨          Non-accelerated filer     ¨        Smaller reporting company x

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). YES  o   NO  x


On September 25, 2012, there were 34,926,620 shares of common stock of the Registrant outstanding. As of December 31, 2011, the Registrant's most recent second quarter, there were 33,161,868 shares of common stock of the Registrant outstanding and the market value of common stock held by non-affiliates was $7,645,217 (based upon the closing price of $0.27 per share of common stock as quoted on the NASD: OTCBB).


Documents Incorporated by Reference

Portions of the Registrant's definitive proxy statement, which will be issued in connection with the 2012 Annual Meeting of Shareholders of Amerityre Corporation, are incorporated by reference into Part III of this Annual Report on Form 10-K.

Table of Contents

AM ERITYRE CORPORATION

2011 ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS


Page

PART I

  1

ITEM 1.

BUSINESS

1

ITEM 1A.

RISK FACTORS

5

ITEM 1B.

UNRESOLVED STAFF COMMENTS

9

ITEM 2.

PROPERTIES

9

ITEM 3.

LEGAL PROCEEDINGS

9

ITEM 4.

SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

9

PART II

10

ITEM 5.

MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

10

ITEM 6.

SELECTED FINANCIAL DATA

11

ITEM 7.

MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

11

ITEM 7A.

QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

18

ITEM 8.

FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

18

ITEM 9.

CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

18

ITEM 9A.

CONTROLS AND PROCEDURES

19

ITEM 9B.

OTHER INFORMATION

20

PART III

 20

ITEM 10.

DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT

ITEM 11.

EXECUTIVE COMPENSATION

ITEM 12.

SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

ITEM 13.

CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

ITEM 14.

PRINCIPAL ACCOUNTING FEES AND SERVICES

PART IV

  21

ITEM 15.

EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

21

ii

Table of Contents

AMERITYRE CORPORATION

2012 ANNUAL REPORT ON FORM 10-K


This report contains "forward-looking statements" within the meaning of the federal securities laws. Forward-looking statements include statements concerning our plans, objectives, goals, strategies, future events, future revenues or performance, capital expenditures, financing needs, plans or intentions relating to acquisitions and other information that is not historical information. In some cases, forward-looking statements can be identified by terminology such as "believes," "expects," "may," "will," "should," "anticipates," or "intends" or the negative of such terms or other comparable terminology, or by discussions of strategy. We may also make additional forward-looking statements from time to time. All such subsequent forward-looking statements, whether written or oral, by us or on our behalf, are also expressly qualified by these cautionary statements.


All forward-looking statements, including without limitation, management's examination of historical operating trends, are based upon our current expectations and various assumptions. Our expectations, beliefs and projections are expressed in good faith and we believe there is a reasonable basis for them, but, there can be no assurance that management's expectations, beliefs and projections will result or be achieved. All forward-looking statements apply only as of the date made. We undertake no obligation to publicly update or revise forward-looking statements which may be made to reflect events or circumstances after the date made or to reflect the occurrence of unanticipated events.


There are a number of risks and uncertainties that could cause our actual results to differ materially from the forward-looking statements contained in or contemplated by this report. Any forward-looking statements should be considered in light of the risks set forth in "Part I. Item 1A. Risk Factors" and elsewhere in this report.


This report may include information with respect to market share, industry conditions and forecasts that we obtained from internal industry research, publicly available information (including industry publications and surveys), and surveys and market research provided by consultants. The publicly available information and the reports, forecasts and other research provided by consultants generally state that the information contained therein has been obtained from sources believed to be reliable, but there can be no assurance as to the accuracy and completeness of such information. We have not independently verified any of the data from third-party sources, nor have we ascertained the underlying economic assumptions relied upon therein. Similarly, our internal research and forecasts are based upon our management's understanding of industry conditions, and such information has not been verified by any independent sources.


For convenience in this report, the terms "Amerityre," "Company," "our," "us" or "we" may be used to refer to Amerityre Corporation.

iii

Table of Contents


PART I


IT EM 1.  BUSINESS


Overview

Amerityre incorporated as a Nevada corporation on January 30, 1995 under the name American Tire Corporation and changed its name to Amerityre Corporation in December 1999.

Amerityre engages in the research and development, manufacturing and sale of polyurethane tires.  We believe that we have developed unique polyurethane formulations that allow us to make products with superior performance characteristics, including abrasion resistance and load-bearing capabilities, than conventional rubber tires.  We also believe that our manufacturing processes are more efficient than traditional tire manufacturing processes, in part because our polyurethane compounds do not require the multiple processing steps, extreme heat, and high pressure that are necessary to cure rubber. Using our polyurethane technologies, we believe tires can be produced which last longer, are less susceptible to failure and offer improved fuel economy.  

Products


Our polyurethane material technology is based on two proprietary formulations; closed-cell polyurethane foam, which is a lightweight material with high load-bearing capabilities for low duty cycle applications; and Elastothane®, a high performance polyurethane elastomer with high load-bearing capabilities for high duty applications. We are concentrating on three segments of the tire market: low duty cycle foam tires, solid forklift tires and agricultural tires.

Closed-Cell Polyurethane Foam Tires

We currently manufacture several lines of closed-cell polyurethane foam tires for bicycles, hand trucks, lawn and garden, wheelbarrow, and medical mobility products.  Our closed-cell polyurethane foam products are often referred to as flat-free because they have no inner tube, do not require inflation and will not go flat even if punctured.  Our closed-cell polyurethane foam tires are mounted on the wheel rim in much the same way as a pneumatic tire.  Our closed-cell polyurethane foam products are virtually maintenance free, eliminating the need to make tedious puncture repairs and offering superior wear compared to rubber based tires.  Foam tires and components accounted for 87% of fiscal 2012 revenues.


Polyurethane Elastomer Forklift Tires

We have developed solid polyurethane forklift tires made of Elastothane®.  We currently produce and sell over 20 sizes for Class 1, 4 and 5 forklifts.  We believe our tires are superior to rubber tires as they are non-marking, more energy efficient, carry greater load weight, operate in lower temperature environments and have longer service lives.  Forklift tires accounted for 9% of fiscal 2012 revenues.

Agricultural Tires

Amerityre has developed two products for the agricultural tire market, one used in irrigation and one used in planting.  Both products have successfully field tested and we are developing sales and marketing strategies and manufacturing plans for these products.  Agricultural tires accounted for 4% of fiscal 2012 revenues.


1

Table of Contents

Raw Materials and Supplies


The two principal chemical raw materials required to manufacture our products are known generically as polyols and isocyanates.  We purchase our chemical raw materials from multiple suppliers.  In addition, we purchase various quantities of additional chemical additives that are mixed with the polyols and isocyanates.  These additional chemicals are also available from multiple suppliers.  Critical raw materials are generally sourced from at least two vendors to assure adequate supply and price competition.


In addition to the chemical raw materials, we purchase steel and plastic wheel components for use in tire and wheel assemblies.  We purchase these components from multiple third-party suppliers.  


Operations/Manufacturing

Our closed-cell polyurethane foam products are primarily manufactured utilizing multiple stationed carousel centrifugal molding presses.  We produce closed-cell foam products using these presses by pouring a proprietary polyurethane formula into a mold, which then spreads out in the mold through centrifugal force.  The molding process occurs by reacting monomeric diphenylmethanediisocyanate (MDI) with polyol and other chemicals.  The chemical reaction causes a cross linking of the chemicals, which thereafter become solid.  The manufacturing process for a closed-cell polyurethane foam product takes less than two minutes.  The closed-cell polyurethane foam product can then be removed from the mold and the process is repeated.

All of our products are inspected following the manufacturing process and prior to shipment to ensure quality.  Any closed-cell foam products considered by our quality control personnel to be defective are disposed of through traditional refuse collection services or are ground into pellets, which can be melted and reused to make other products and reduce waste of raw materials.  


Information Systems

We use commercial computer aided design (CAD) software in connection with engineering and designing our products.  This software allows us to integrate our proprietary manufacturing and production data with our design technology, enabling our engineering department to leverage our previous manufacturing and test results to predict the performance characteristics of new product designs and product improvements.  For general business purposes, we use commercially available software for financial, distribution, manufacturing, customer relationships and payroll management.

Sales, Marketing and Distribution

We have one full-time sales person and five independent sales representatives actively targeting customers that utilize tires in significant volume.  Senior Managements is also working to establish broader distribution for our products by contacting major regional distributors, retail cooperatives and chains that distribute and otherwise sell our products.  We currently distribute directly from our manufacturing facility in Boulder City, Nevada and from an independent, contracted warehouse in Ravenna, Ohio.

Internationally, we have a distribution agreement established in Canada and a manufacturing licensing agreement established in Asia. In addition, we have developed distribution partners in Sweden and Germany. We continue to seek additional international sales and marketing partners to expand the worldwide sales and distribution of our products.


Customers

We have two customers who accounted for 33% and 37% of our sales for the years ended June 30, 2012 and 2011, respectively.    In general, our customers are comprised of OEMs of lawn and garden products, and outdoor power equipment, regional distributors, retail cooperatives and chains that sell lawn and garden products, bicycle tires and hand truck tires to the aftermarket.

2

Table of Contents

Competition

There are several companies that produce not-for-highway-use or light-use tires from polyurethane foam such as Greentyre, manufactures in the UK; Carefree Tire manufactures in China; Marathon Tire manufactures in China; Custom Engineered Wheels and Krypton Industries manufacture in India.  We believe our closed-cell polyurethane foam tires differ from the polyurethane foam tires offered by the aforementioned competitors because our products contain millions of closed-cell versus open-cell air bubbles.  By closing the cells, our products have higher load bearing characteristics than tire products with open-cell polyurethane foam, while effectively producing a ride quality comparable to a pneumatic tire.

In addition to manufacturers of polyurethane foam tires, we compete directly with companies that manufacture and market traditional not-for-highway-use, low-duty pneumatic, semi-pneumatic, and solid tires made from rubber.  The not-for-highway use tire industry has historically been highly competitive and several of our competitors have financial resources that substantially exceed ours. In addition, many of our competitors are very large companies, such as Kenda, Taiwan; Maxxis International, Taiwan; Cheng Shin, China; and Carlisle Tire, USA; that have established brand name recognition, have established distribution networks for their products, and have developed consumer loyalty to such products.


Intellectual Property Rights

We seek to obtain patent protection for, or to maintain as trade secrets, those inventions that we consider important to the development of our business.  We rely on a combination of patent, trademark, copyright and trade secret laws in the United States and other jurisdictions as well as confidentiality procedures and contractual provisions to protect our proprietary technology and branding.  We control access to our proprietary technology and enter into confidentiality agreements with our employees and other third parties.  We own twelve issued U.S. patents and have additional pending U.S. and foreign patent applications.  We use various trademarks in association with marketing our products, including the names Amerityre®, Elastothane®, Arcus®,  Atmospheric®,  Amerifill®, Tire Technology for the 21st Century®, Flexfill®, Kik® and Kryon®.

Trade Secrets

Our polyurethane material technology is based on two key proprietary formulations, a closed-cell polyurethane foam, which is a lightweight material with high load-bearing capabilities for low duty cycle applications, and a polyurethane elastomer, which is a high performing material with high load-bearing capabilities for high duty applications. We are in compliance with the governing regulations that provide our formulations protection under U.S. Trade Secret law.

3

Table of Contents

Patents

Set forth in the schedule below are patents that have been issued or for which a patent application is pending with respect to our technology.

Description of Patent

U.S. Patent App/Serial No.

Issued Date or Date Filed

Brief Description/Purpose

Improved Method and Apparatus for Making Tires and the Like

6,165,397

12/26/2000

Applies to pouring the material at the inside diameter (where the tire starts) during the manufacturing process

Run-Flat Tire with Elastomeric Inner Support

6,679,306

1/20/2004

Applies to a polyurethane insert within a tire to create a "run-flat" system

Method and Apparatus for Vacuum Forming a Wheel from a Urethane Material

7,377,596

4/29/2005

Applies to the method we employ to coat a light gauge steel or aluminum wheel by evacuating air from the mold while moving material through the mold utilizing a vacuum process to eliminate pockets of air within the matrix of the material. The resulting product becomes a "Composite" wheel.

Elastomeric Tire with Arch Shaped Shoulders

6,971,426

12/06/2005

Applies the design of the Arcus® run-flat tire (the first polyurethane elastomer tire to run with or without air)

Method for Manufacturing a Tire with Belts, Plies and Beads Using a Pre-cured Elastomer and Cold Rolling Method

6,974,519

12/13/2005

Applies to how we put the plies, beads and belts on a mandrel or bladder to be placed inside a mold for manufacturing a tire

Plies Sleeve for Use in Forming an Elastomeric Tire

7,438,961

1/10/2006

Applies to the how the tire beads and tire plies are assembled prior to putting them on a mandrel or a core/bladder

Improved Vacuum Forming Apparatus for Vacuum Forming a Tire, Wheel or Other Item from an Elastomeric Material

7,527,489

5/22/2006

Applies to an improvement in the vacuum forming equipment used to manufacture a tire and other items

Method and Apparatus for Vacuum Forming a Wheel from a Urethane Material

7,377,596

5/27/2008

Applies to the method we employ to coat a light gauge steel or aluminum wheel by evacuating air from the mold while moving material through the mold utilizing a vacuum process to eliminate pockets of air within the matrix of the material. The resulting product becomes a "Composite" wheel.

Method for Vacuum Forming an Elastomeric Tire

8,114,330

2/14/2012

Applies to polyurethane tires and methods we employ to evacuate air from mold while moving material through the mold.

Run Flat Tire Insert System

7,398,809

7/15/2008

Applies to how to utilize an insert on a wheel within a corresponding pneumatic tire

Method and Apparatus for Vacuum Forming an Elastomeric Tire

7,399,172

7/15/2008

Applies to polyurethane tires and the method we employ to evacuate air from the mold while moving material through the mold utilizing a vacuum process to eliminate air pockets within the matrix of the material

Method  for Filling a Tire and Wheel with a Closed Cell Foam

Pending

10/31/2008

Applies to how filling a tire and wheel assembly cavity with flexible closed cell polyurethane foam

System for Retreading a Transport Tire with Polyurethane Tread

8,206,141

6/26/2012

Applies to apparatus we used to retread transport tires with polyurethane tread.

Process for Forming an Airless Spare Tire

Pending

9/7/2011

Applies to the process we employ to manufacture an automobile spare tire from polyurethane.

Method for Retreading a Heavy Duty Tire with a Polyurethane Tread

Pending

05/2/2012

Applies to the method we employ for applying a polyurethane tread to a rubber tire casing.

4

Table of Contents

Trademarks

Set forth in the schedule below are the United States trademarks that have been registered.

Trademarks

Registration/Serial #

Issued/Filed

Amerityre®

2,401,989

8/14/2001

Elastothane®

3,139,489

9/9/2003

Arcus®

2,908,077

12/1/2003

Atmospheric®

3,089,313

5/9/2006

Logo™

85/686,835

7/25/2012

Amerifill®

3,440,176

3/18/2008

Tire Technology for the 21st Century®

3,190,582

1/2/2007

Flexfill®

3,499,944

9/9/2008

Kik®

3,608,633

4/21/2009

Kryon®

4,009,423

9/9/2011


We also own certain trademark applications and/or trademark registrations relating to the Arcus trademark in several foreign jurisdictions.

Employees

As of August 31, 2012, we had 21 full-time employees and 7 part-time employees, including 6 salaried and 22 hourly employees.  We may hire temporary labor for manufacturing needs as required.  We believe that we will be able to hire a sufficient quantity of qualified laborers in the local area to meet our employment needs.  Our manufacturing process does not require special training, other than orientation to our production techniques and specific equipment.  None of our employees is represented by a labor union or a collective bargaining agreement.  We consider our relations with our employees to be good.


Research and Development

Our current research and development activities are focused primarily on product improvement (i.e., forklift tires and agriculture tires) and cost efficient manufacturing processes.  Due to the Company's limited resources, tire projects which are contingent on additional development, such as composite and automotive tires, have been put on hold and will be revisited at a later date.  Research and development expenses were $10,032 and $22,795, for fiscal 2012 and 2011, respectively.

IT EM 1A. RISK FACTORS

Due to our history of operating losses, our auditors are uncertain that we will be able to continue as a going concern.


Our financial statements have been prepared assuming that we will continue as a going concern.  For the years ended June 30, 2012 and 2011, we had net losses of approximately $1,175,019 and $841,133 respectively.  The independent auditors' report issued in conjunction with the financial statements for the year ended June 30, 2012 contains an explanatory paragraph indicating that the foregoing matters raise substantial doubt about our ability to continue as a going concern. We cannot guarantee that we can generate net income, increase revenues or successfully expand our operation in the future, and if we cannot do so, the company may not be sustainable and any investment in the company may be lost.


5

Table of Contents

Because our auditors have expressed a going concern opinion, our ability to obtain additional financing could be adversely affected.


We have incurred significant losses since inception, which have resulted in an accumulated deficit of $58,062,103 at June 30, 2012.   Because of these continued losses and our accumulated deficit, we have included a going concern paragraph in Note 5 to our financial statements included in this report, addressing substantial doubt about our ability to continue as a going concern. This going concern paragraph could adversely affect our ability to obtain favorable financing terms in the future or to obtain any additional financing if needed.


Historically, we have lost money from operations and we have made no provision for any contingency, unexpected expenses or increases in costs that may arise.

Since inception, we have been able to cover our operating losses from the sale of our securities.  We do not know if these sources of funds will be available to cover future operating losses. If we are unable to obtain adequate sources of funds to operate our business we may not be able to continue as a going concern.

Our business operations and plans could be adversely affected in the event we need additional financing and are unable to obtain such funding when needed.  To the extent that our business strategy requires expanding our operations, such expansion could be costly to implement and may cause us to experience significant continuing losses.  It is possible that our available short-term assets and anticipated revenues may not be sufficient to meet our operating expenses, business expansion plans, and capital expenditures for the next twelve months.  Insufficient funds may prevent us from implementing our business strategy or may require us to delay, scale back or eliminate certain opportunities for the commercialization of our technology and products.  If we cannot generate adequate sales of our products, or increase our revenues through licensing of our technology or other means, then we may be forced to cease operations.

In order to succeed as a company, we must continue to manufacture quality products and sell adequate quantities of products at prices sufficient to generate profits.  We may not accomplish these objectives.   A number of factors may affect future sales of our products even if we are successful in increasing our revenue base.  These factors include whether competitors produce alternative or superior products and whether the cost of implementing our products is competitive in the marketplace.

In addition, we are attempting to increase revenues through licensing our technology and manufacturing rights, and selling polyurethane chemical systems to customers that produce their own products.  If these proposals are not viable in the marketplace, we may not generate significant revenues from these efforts.


If holders of our secured convertible promissory notes do not choose to convert the notes to shares of our common stock, we may have difficulty obtaining the necessary funds to pay principal and interest in cash when due .

During the year ended June 30, 2011, we closed a private placement of secured convertible promissory notes (the "Notes"). We sold an aggregate of $755,800 in Notes. The Notes were for a term of one year with simple interest of 6%. The Notes are convertible at the holders' option to our common stock at a conversion rate of $0.35 per share. As an incentive to convert, if a holder elects such conversion, for each two shares in the conversion, the holder shall also receive one warrant to purchase an additional share, exercisable at $0.60 per share for an exercise period of 2 years from the date of conversion. However, if a holder does not elect such conversion, we are obliged to repay the principal and interest in cash. At this filing date, some holders have converted into shares, some have redeemed for cash and the remaining holders have extended their maturity until September 30, 2012. If several of the outstanding note holders demand cash repayment, it could severely impact our cash flow, limit our ability to make necessary capital improvements and prevent us from completing our business plans or expanding our production capability.


A continuing recession in the U.S. and general downturn in the global economy could have an adverse impact on our business, operating results or financial position.

The U.S. economy has been in recession and there has been a general downturn in the global economy. A continuation or worsening of these conditions, including credit and capital markets disruptions, could have an adverse impact on our business, operating results or financial position in a number of ways. We may experience declines in revenues and cash flows as a result of reduced orders, payment delays or other factors caused by the economic problems of our customers and prospective customers. We may experience supply chain delays, disruptions or other problems associated with financial constraints faced by our suppliers and customers. We may incur increased costs or experience difficulty with about ability to borrow in the future or otherwise with financing our operating, investing or financing activities. Any of these potential problems could hinder our efforts to increase our sales and might, if severe and extensive enough, cause our sales to decline, jeopardizing our ability to operate.

We may experience delays in resolving unexpected technical issues experienced in completing development of new technology that will increase development costs and postpone anticipated sales and revenues.

As we develop and improve our products, we frequently must solve chemical, manufacturing and/or equipment-related issues.  Some of these issues are ones that we cannot anticipate because the products we are developing are new. If we must revise existing manufacturing processes or order specialized equipment to address a particular issue, we may not meet our projected timetable for bringing products to market.  Such delays may interfere with existing manufacturing schedules, negatively affect revenues and increase our cost of operations.

6

Table of Contents

Because we have limited experience, we may be unable to successfully manage planned growth

We have limited experience in the commercial manufacturing and marketing arena, limited product sales and marketing experience, and limited staff and support systems, especially compared to competitors in the tire industry.  In order to become profitable through the commercialization of our technology and products, our products must be cost-effective, economical to produce, have the ability to be distributed on a commercial scale.  Furthermore, if our technologies and products do not achieve, or if they are unable to maintain, market acceptance or regulatory approval, we may not be profitable.

Our success depends, in part, on our ability to license, market and distribute our technologies and products effectively.  We have limited manufacturing, marketing and distribution capabilities.   We may not properly ascertain or assess any and all risks inherent in the industry.  We may not be successful in entering into new licensing or marketing arrangements, engaging independent distributors, or recruiting, training and retaining a larger internal marketing staff and sales force.  If we are unable to meet the challenges posed by our planned licensing, manufacturing, distribution and sales growth, our business may fail.

We are subject to governmental regulations, including environmental and health and safety regulations.

Our business operations are subject to a variety of national, state and local laws and regulations, many of which deal with the environment and health and safety issues. We believe we are in material compliance with applicable environmental and worker health and safety requirements. However, material future expenditures may be necessary if compliance standards change or material unknown conditions that require remediation are discovered. If we fail to comply with present and future environmental and worker health and safety laws and regulations, we could be subject to future liabilities or interruptions in our operations, which could have a material adverse effect on our business.

The markets in which we sell our products are highly competitive.

The markets for our products are highly competitive on a global basis, with a number of companies having significantly greater resources and market share than us.  Many of our competitors maintain a significantly higher level of brand recognition than we do.  Their access to greater resources enables them to adapt more quickly to changes in the markets we have targeted.  Our competitors are able to devote greater resources to the development and sale of new products.  Most of the products we have developed have not obtained broad market acceptance and rely on our emerging technology.  To improve our competitive position, we will need to make significant ongoing investments in manufacturing, customer service and support, marketing, sales, research and development and intellectual property protection.  We do not know if we will have sufficient resources to continue to make such investments or if we will maintain or improve our competitive position within the markets we serve.

We attempt to protect the critical elements of our proprietary technology as trade secrets.  Because of our reliance on trade secrets, we are unable to prevent third parties from independently developing technologies that are similar or superior to our technology or from successfully reverse engineering or otherwise replicating our technology.

In certain cases, where the disclosure of information required to obtain a patent would divulge critical proprietary data, we may choose not to patent elements of our proprietary technology and processes which we have developed or may develop in the future and instead rely on trade secret laws to protect certain elements of our proprietary technology and processes.  For example, we rely on trade secrets to protect our key polyurethane formulations.  These formulations are critical elements of and central to our proprietary technology.  Our trade secrets could be compromised by third parties, or intentionally or accidentally by our employees.  It is also possible that others will independently develop technologies that are similar or superior to our technology.  Third parties may also legally reverse engineer our products.  Independent development, reverse engineering, or other legal copying of those elements of our proprietary technology that we attempt to protect as trade secrets could enable third parties to benefit from our technologies without compensating us.  The protection of proprietary technology through claims of trade secret status has been the subject of increasing claims and litigation by various companies both in order to protect proprietary rights as well as for competitive reasons, even when proprietary claims are unsubstantiated.  The prosecution of litigation to protect our trade secrets or the defense of such claims is costly and unpredictable given the uncertainty and rapid development of the principles of law pertaining to this area.  We may also be subject to claims by other parties with regard to the use of technology information and data that may be deemed proprietary to others.  The independent development of technologies that are similar or superior to our technology or the reverse engineering of our products by third parties would have a material adverse effect on our business and results of operations.  In addition, the loss of our ability to use any of our trade secrets or other proprietary technology would have a material adverse effect on our business and results of operations.  Because trade secrets do not ensure exclusivity and pose such issues with respect to enforcement, third parties may decline to partner with us or may pay lesser compensation for use of our technology which is protected only by trade secrets.

7

Table of Contents

Our business depends on the protection of our patents and other intellectual property and may suffer if we are unable to adequately protect such intellectual property.

Our success and ability to compete are substantially dependent upon our intellectual property.  We rely on patent, trademark and copyright laws, trade secret protection and confidentiality or license agreements with our employees, customers, strategic partners and others to protect our intellectual property rights.  However, the steps we take to protect our intellectual property rights may be inadequate.  There are events that are outside of our control that pose a threat to our intellectual property rights as well as to our products and services.  For example, effective intellectual property protection may not be available in every country in which we license our technology or our products are distributed.  Also, the efforts we have taken to protect our proprietary rights may not be sufficient or effective.  Any impairment of our intellectual property rights could harm our business and our ability to compete.  Also, protecting our intellectual property rights is costly and time consuming.  Any increase in the unauthorized use of our intellectual property could make it more expensive to do business and harm our operating results.  In addition, other parties may independently develop similar or competing technologies designed around any patents that may be issued to us.

We have been granted a number of  U.S. patents and have several U.S. patent applications pending relating to certain aspects of our manufacturing technology and use of polyurethane to make tires and we may seek further patents on future innovations.  Our ability to either manufacture products or license our technology is substantially dependent on the validity and enforcement of these patents and patents pending.  We cannot guarantee that our patents will not be invalidated, circumvented or challenged, that patents will be issued for our patents pending, that the rights granted under the patents will provide us competitive advantages or that our current and future patent applications will be granted.

Third parties may invalidate our patents

Third parties may seek to challenge, invalidate, circumvent or render unenforceable any patents or proprietary rights owned by or licensed to us based on, among other things:

·  

subsequently discovered prior art;

·  

lack of entitlement to the priority of an earlier, related application; or

·  

failure to comply with the written description, best mode, enablement or other applicable requirements.

United States patent law requires that a patent must disclose the "best mode" of creating and using the invention covered by a patent.  If the inventor of a patent knows of a better way, or "best mode," to create the invention and fails to disclose it, that failure could result in the loss of patent rights.  Our decision to protect certain elements of our proprietary technologies as trade secrets and to not disclose such technologies in patent applications, may serve as a basis for third parties to challenge and ultimately invalidate certain of our related patents based on a failure to disclose the best mode of creating and using the invention claimed in the applicable patent.  If a third party is successful in challenging the validity of our patents, our inability to enforce our intellectual property rights could seriously harm our business.

We may be liable for infringing the intellectual property rights of others.

Our products and technologies may be the subject of claims of intellectual property infringement in the future.  Our technologies may not be able to withstand any third-party claims or rights against their use.  Any intellectual property claims, with or without merit, could be time-consuming, expensive to litigate or settle, could divert resources and attention and could require us to obtain a license to use the intellectual property of third parties.  We may be unable to obtain licenses from these third parties on favorable terms, if at all.  Even if a license is available, we may have to pay substantial royalties to obtain it.  If we cannot defend such claims or obtain necessary licenses on reasonable terms, we may be precluded from offering most or all of our products or services and our business and results of operations will be adversely affected.

Because our proposed tire products are derived from new technology, our product liability insurance costs will likely increase and we may be exposed to product liability risks that could adversely affect profitability.

Even if tests indicate that our tires meet performance standards and our new highway-use tire products are approved for use, these products may subject us to significant product liability claims because the technology is new and there is little history of on-road use.  Moreover, because our products are and will be used in applications where their failure could result in substantial injury or death, we could also be subject to product liability claims.  Introduction of such new products and increased use of our existing products will most likely increase our product liability premiums and defense of potential claims could increase insurance costs even further, which could substantially increase our expenses.  Any insurance we obtain may not be sufficient to cover the losses incurred through such lawsuits.

8

Table of Contents

Significant increases in the price of chemical raw materials, steel and other raw materials used in our products could increase our production costs and decrease our profit margins or make our products less competitive in the marketplace due to price increases.

The materials used to produce our products are susceptible to price fluctuations due to supply and demand trends, the economic climate and other unforeseen trends.  With respect to both polyols and isocyanates, worldwide demand is increasing and may exceed current capacity. If we are successful in implementing our business strategy, the quantities of chemical raw materials required by us or by others that utilize our technology may increase significantly. Shortages, if any, may result in chemical price increases. We have experienced increases in the cost of wheel components due to the increased cost of steel, but no supply delays or shortages.  However, we anticipate that we may experience an increase in steel wheel components at such time as the Chinese government cancels any export rebates it may be currently providing Chinese wheel manufacturers.  Our raw materials pricing could increase further in the future.  Because we are introducing products that will compete, in part, on the basis of price, we may be unable to pass cost increases on to our customers.  If we are unable to pass on raw material cost increases to our customers, our future results of operations and cash flow will be materially adversely affected.

Our ability to execute our business plan would be harmed if we are unable to retain or attract key personnel.

Our polyurethane technology has been developed by a small number of the members of our management team and only a limited number of the members of our management team maintain the technical knowledge to produce our products.  Our future success depends, to a significant extent, upon our ability to retain and attract the services of these and other key personnel.  The loss of the services of one or more members of our management team could hinder our ability to effectively manage our business and implement our growth strategies.  Finding suitable replacements could be difficult, and competition for such personnel of similar experience is intense.  We do not carry key person insurance on any of our officers.

Shareholders and potential investors may experience some difficulty trading our stock since it is only quoted on the National Association of Securities Dealers (NASD) Over the Counter Bulletin Board.


 Our common stock is quoted on NASD OTC Bulletin Board.  As a result, secondary trading of our shares may be subject to certain state imposed restrictions and the ability of individual stockholders to trade their shares in a particular state may be subject to various rules and regulations of that state. A number of states require that an issuer's securities be registered in their state or appropriately exempted from registration before the securities are permitted to trade in that state. Further, our shares may be subject to the provisions of Section 15(g) and Rule 15g-9 of the Exchange Act, commonly referred to as the "penny stock" rule. Broker-dealers who sell penny stocks to persons other than established customers and accredited investors (generally persons with assets in excess of $1,000,000, excluding the value of a principal residence, or annual income exceeding $200,000 by an individual, or $300,000 together with his or her spouse), are subject to additional sales practice requirements.


For transactions covered by these rules, broker-dealers must make a special suitability determination for the purchase of such securities and must have received the purchaser's written consent to the transaction prior to the purchase. Additionally, for any transaction involving a penny stock, unless exempt, the rules require the delivery, prior to the first transaction, of a risk disclosure document relating to the penny stock market. A broker-dealer also must disclose the commissions payable to both the broker-dealer and the registered representative, and current quotations for the securities. Finally, monthly statements must be sent to clients disclosing recent price information for the penny stocks held in the account and information on the limited market in penny stocks. Consequently, these rules may restrict the ability of broker-dealers to trade and/or maintain a market in our common stock and may affect the ability of stockholders to sell their shares.


ITE M 1B. UNRESOLVED STAFF COMMENTS

As of June 30, 2012, we did not have any unresolved comments with the staff of the Securities and Exchange Commission.

IT EM 2. PROPERTIES

In June 2012, we negotiated a two year extension of the lease on our executive office and manufacturing facility located at 1501 Industrial Road, Boulder City, Nevada.  The property consists of a 49,200 square foot building, which includes approximately 5,500 square feet of office space, situated on approximately 4.15 acres.   The extended lease commenced on July 1, 2012 and reduced the base rent to $11,000 per month.  All other terms and conditions of the building lease remain in effect.


IT EM 3. LEGAL PROCEEDINGS

As of June 30, 2012, we were not involved in any legal proceedings.

IT EM 4. RESERVED

9

Table of Contents

PART II

ITE M 5. MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our common stock traded on the NASDAQ Capital Market under the symbol "AMTY" through February 3, 2010. Subsequent to that date, our common stock is quoted on the NASD OTC Bulletin Board. The following table sets forth for the periods indicated the high and low sale prices of our common stock.  Prices represent inter-dealer quotations without adjustment for retail markups, markdowns or commissions and may not represent actual transactions.


Fiscal year ended June 30,

High

Low

2012

Fourth Quarter

$

0.39

$

0.16

Third Quarter

$

0.40

$

0.26

Second Quarter

$

0.46

$

0.26

First Quarter

$

0.50

$

0.16

2011

Fourth Quarter

$

0.30

$

0.12

Third Quarter

$

0.32

$

0.21

Second Quarter

$

0.35

$

0.20

First Quarter

$

0.49

$

0.26

The closing price of our common stock on the NASD OTC Bulletin Board on September 25, 2012 was $0.19 per share.  As of September 25, 2012, there were approximately 483 holders of record of our common stock and 34,926,620 shares of common stock outstanding based on information provided by our transfer agent, Interwest Transfer Company, 1981 E. Murray-Holladay Road, Holladay, Utah 84117.

On September 3, 2010, we closed a private placement of secured convertible promissory notes (the "Notes").  We sold an aggregate of $755,800 in Notes.  The Notes are for a term of one year with simple interest of 6%.  The principal and interest are due at maturity if the note holders decide not to convert the note into common shares.  The Notes are convertible at the holders' option to our common stock at a conversion rate of $0.35 per share.  If the holder elects such conversion, for each two shares in the conversion, the holder shall also receive one warrant to purchase an additional share, exercisable at $0.60 per share for an exercise period of 2 years from the date of conversion.  No officers, directors or affiliates of the Company participated in the private placement.  The Notes were sold pursuant to subscription documents between the Company and each investor.  We believe the offer and sale of the securities described above were exempt from the registration requirements of the Securities Act of 1933, as amended (the "Act"), for the private placement of these securities pursuant to Section 4(2) of the Act and/or Regulation D thereunder because the securities were sold to accredited investors in a transaction not involving a public offering.  During the year ended June 30, 2012, $110,000 of the Notes were redeemed; $195,800 of the Notes converted into 559,429 shares of common stock; and $450,000 of the Notes extended maturity until September 30, 2012.  Interest due on the Notes as of June 30, 2012 was $9,018.


Dividends


We have not paid any dividends on our common stock since our inception and do not anticipate paying any dividends in the foreseeable future.  Any future determination to pay dividends will be at the discretion of our Board of Directors and will be dependent upon then-existing conditions, including our financial condition, results of operations, contractual restrictions, capital requirements, business prospects and other factors our Board of Directors deems relevant.

10

Table of Contents

ITE M 6. SELECTED FINANCIAL DATA

We are "Smaller Reporting Company" as defined under §229.10(f)(1) of Regulation S-K and are not required to provide the information required by this Item.

ITE M 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

This discussion and analysis contains statements of a forward-looking nature relating to future events or our future financial performance or financial condition.  Such statements are only predictions and the actual events or results may differ materially from the results discussed in or implied by the forward-looking statements.  Factors that could cause or contribute to such differences include, but are not limited to, those discussed in "Part I. Item 1A. Risk Factors" as well as those discussed elsewhere in this report.  The historical results set forth in this discussion and analyses are not necessarily indicative of trends with respect to any actual or projected future financial performance.  This discussion and analysis should be read in conjunction with the financial statements and the related notes thereto included elsewhere in this report.


Overview


Amerityre engages in the research and development, manufacturing and sale of polyurethane tires.  We believe that we have developed unique polyurethane formulations that allow us to make products with superior performance characteristics, including abrasion resistance and load-bearing capabilities, than conventional rubber tires.  We also believe that our manufacturing processes are more efficient than traditional tire manufacturing processes, in part because our polyurethane compounds do not require the multiple processing steps, extreme heat, and high pressure that are necessary to cure rubber. Using our polyurethane technologies, we believe tires can be produced which last longer, are less susceptible to failure and offer improved fuel economy.


We are concentrating on three segments of the tire market: low duty cycle foam tires, solid forklift tires and agricultural tires. Our most recent activities in these areas are set forth below:


Low duty cycle foam tires – The sale of polyurethane foam tires to original equipment manufacturers, distributors and dealers accounts for most of our revenue at this time. We have the ability to produce a broad range of products for the low duty cycle tire market. Marketing efforts are focused on building a distribution network to expand our business and product sales.


Solid forklift tires – Manufacturing was suspended in the second quarter of fiscal 2012 due to quality and process issues.  We engaged a polyurethane specialist to lead the corrective action efforts and complete the development of a marketable forklift tire.  The Company recommenced commercial sales of forklift tires in the third quarter of fiscal 2012.

Agricultural tires – The Company completed a product redesign in the fourth quarter of fiscal 2012 and is currently pursuing two segments of the agricultural tire market. We believe both segments present a significant opportunity and is a significant part of the Company's growth strategy.


Due to the Company's limited resources, tire projects which are contingent on additional development, such as composite and automotive tires, have been put on hold and will be revisited at a later date.


11

Table of Contents

Factors Affecting Results of Operations

Our operating expenses consisted primarily of the following:

·  

Cost of sales, which consists primarily of raw materials, components and production of our products, including applied labor costs and benefits expenses, maintenance, facilities and other operating costs associated with the production of our products;

·  

Selling, general and administrative expenses, which consist primarily of salaries, commissions and related benefits paid to our employees and related selling and administrative costs including professional fees;

·  

Research and development expenses, which consist primarily of equipment and materials used in the development of our technologies;

·  

Consulting expenses, which consist primarily of amounts paid to third-parties for outside services;

·  

Depreciation and amortization expenses which result from the depreciation of our property and equipment, including amortization of our intangible assets; and

·  

Amortization of deferred compensation that results from the expense related to certain stock options to our employees.


Critical Accounting Policies


Our discussion and analysis of our financial condition and results of operations are based upon our financial statements, which have been prepared in accordance with United States generally accepted accounting principles.  The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses.  On an ongoing basis, we evaluate our estimates, including those related to uncollectible receivables, inventory valuation, deferred compensation and contingencies.  We base our estimates on historical performance and on various other assumptions that we believe to be reasonable under the circumstances.  These estimates allow us to make judgments about the carrying values of assets and liabilities that are not readily apparent from other sources.


We believe the following accounting policies are our critical accounting policies because they are important to the portrayal of our financial condition and results of operations and they require critical management judgments and estimates about matters that may be uncertain.  If actual results or events differ materially from those contemplated by us in making these estimates, our reported financial condition and results of operations for future periods could be materially affected.


Revenue Recognition


Revenue for products is recognized when the sales amount is determined, shipment of goods to the customer has occurred and collection is reasonably assured. Generally, we ship all of our products FOB origination.

12

Table of Contents

Valuation of Intangible Assets and Goodwill


At June 30, 2012, the Company had capitalized patent and trademark costs, net of accumulated amortization, totaling $531,222. The patents which have been granted are being amortized over a period of 20 years.  Patents which are pending or are being developed are not amortized until a patent has been issued.  We evaluate the recoverability of intangibles and review the amortization period on a continual basis utilizing the guidance of Accounting Standards Codification 350, Intangibles – Goodwill and Other (ASC 350). We test our patents and trademarks for impairment at least annually and whenever events or changes in circumstances indicated that the carrying value may not be recoverable. We consider the following indicators, among others, when determining whether or not our patents are impaired:


·  

any changes in the market relating to the patents that would decrease the life of the asset;


·  

any adverse change in the extent or manner in which the patents are being used;


·  

any significant adverse change in legal factors relating to the use of the patents;


·  

current-period operating or cash flow loss combined with our history of operating or cash flow losses;


·  

future cash flow values based on the expectation of commercialization through licensing; and


·  

current expectations that, more likely than not, the patents will be sold or otherwise disposed of significantly before the end of its previously estimated useful life.


Inventory

Inventory is stated at the lower of cost (computed on a first-in, first-out basis) or market.  The inventory consists of chemicals, finished goods produced in our plant and products purchased for resale.


Stock-Based Compensation

Equity securities issued for services rendered have been accounted for at the fair market value of the securities on the date of authorization.  Per the provisions of Accounting Standards Codification 718, Compensation – Stock Compensation (ASC 718), stock-based compensation expense recognized for the fiscal years ended June 30, 2012 and 2011 was $480,160 and $142,863 respectively.


Seasonality

A substantial majority of our sales are to customers within the United States.  We experience some seasonality in the sale of our closed-cell polyurethane foam tires for bicycles and lawn and garden products because sales of these products generally decline during the winter months in the United States.  Sales of our closed-cell polyurethane form tire products generally peak during the spring and summer months; typically resulting in greater sales volumes during the third and fourth quarters of the fiscal year.

13

Table of Contents

Results of Operations

Our management reviews and analyzes several key performance indicators in order to manage our business and assess the quality and potential variability of our revenues and cash flows.  These key performance indicators include:

·  

Net revenues, which consists of product sales revenues and equipment sales revenues, if any;

·  

Sales revenue, net of returns and trade discounts, which is an indicator of our overall business growth and the success of our sales and marketing efforts;

·  

Gross profit, which is an indicator of both competitive pricing pressures and the cost of sales of our products;

·  

Growth in our customer base, which is an indicator of the success of our sales efforts; and

·  

Distribution of revenue across our products offered.


The following summary table presents a comparison of our results of operations for the fiscal years ended June 30, 2012 and 2011 with respect to certain key financial measures.  The comparisons illustrated in the table are discussed in greater detail below


Percent

Fiscal Year Ended June 30,

Change

2012

2011

2012 vs. 2011

Net revenues

$ 4,365 $ 3,679 18.6 %

Cost of revenues

2,833 2,329 21.6 %

Gross profit

1,531 1,350 13.4 %

Selling, general, and administrative expenses (1)

2,371 1,839 28.9 %

Research  and development expenses

10 23 (56.5 )%

Consulting expenses

90 127 (29.1 )%

Depreciation and amortization expenses

212 238 (10.9 )%

Gain on sales of assets

9 6 50.0 %

Gain on settlement

- 110 (100.0 )%

Other Income/(Expense)

(32 ) (43 ) (25.6 )%

Net loss

$ (1,175 ) $ (841 ) 39.7 %

(1)   Includes stock-based compensation expense of $480,160 and $142,863 for the fiscal years ended June 30, 2012 and 2011, respectively.

14

Table of Contents

Year Ended June 30, 2012 Compared to the Year Ended June 30, 2011

Net revenues .   Net revenues of $4,364,756 for the year ended June 30, 2012, represents a $685,716 or 18.6% increase over net revenues of $3,679,040 the year ended June 30, 2011.  The overall increase in revenues was largely due to the revenue growth in several product lines.  Hand truck tire and wheel assemblies revenues increased approximately 12% over the prior year and remain our number one selling product representing approximately 30% of revenue.  Revenues for wheel barrow tire and wheel assemblies grew approximately 44% over the prior year and became our second best selling product.  Lawn and garden products accounted for approximately 12% of total revenues and are our third largest selling product line.  Although forklift tire sales increased approximately 137% over the prior year, tire failures during the second quarter caused a production shutdown for several months.  As a result, forklift tire sales did not meet management's expectations for the fiscal year. The forklift tire failures were caused by product design and chemical mixing problems that have since been resolved and production recommenced in March 2012.  The improved performance of the forklift tire has led to the resurgence of product sales.  The forklift dealer network experienced growth during the fourth quarter of fiscal 2012. Sales of blended chemicals to customers licensed to manufacture non-competing products also increased significantly over the prior year and represents approximately 8% of total revenues.  Engineering and product redesign of the agricultural product lines was completed in the fourth quarter of fiscal 2012 and are ready for a major product launch in the spring of 2013.  An initial startup of orders has already been booked.


Cost of revenues .  Cost of revenues for the year ended June 30, 2012 was $2,833,385 or 64.9% of revenues compared to $2,329,139 or 63.3% of revenues for fiscal 2011.  The increase as a percent of revenue was largely due to our inability to purchase chemicals at bulk load pricing due to cash flow constraints.  In some cases, wheel components have been sourced domestically at higher per unit prices rather than from international suppliers due to our inability to meet minimum purchasing requirements.  Both of these issues lead to a negative purchase price variance in the second half of the year.  In addition, redesign and retooling of the forklift tire product lines resulted in higher than expected costs.  These issues have led to higher costs of revenues and lower gross profit margins.  The Company still maintains sufficient production capacity to meet anticipated customer demand without incurring a proportionate increase in overall production costs.  In addition, recent capital funding has allowed us to return to bulk chemical purchases at lower costs per unit.

Gross profit .  Gross profit for the year ended June 30, 2012 of $1,531,371 represents a 13.4% increase over gross profit of $1,349,901 for the same period in 2011. The fiscal 2012 gross profit reflects a 35.1% gross margin for product sales compared to a gross margin on product sales of 36.7% for fiscal 2011.

Selling, general and administrative expenses.   Selling, general and administrative expenses (SG&A) of $2,370,858 for the year ended June 30, 2012 represents a 28.9% increase over SG&A expenses of $1,839,459 for the same period in 2011. The increase in SG&A expenses over the prior year is largely due to an increase in the use of stock-based compensation for services, an increase in sales related expenses and warranty expense related to forklift tire failures experienced in the second quarter.

Recognizing a significant need to reorganize key management positions, over the past year we have strived to place qualified individuals in key positions.  Often, we have had to turn to outside consultants, recently graduated students, interns and directors to fill key positions, assist the current staff or complete important projects.  In a number of cases, we have missed opportunities to retain qualified individuals due to cash flow constraints.  Therefore, in order to attract and retain the qualified personnel needed to achieve our goals, management has resorted to the issuance of stock or stock options whenever possible.  However in many cases, the issuance of stock and stock options is only a viable option to those who have independent sources of personal income and deeply believe in the potential of the Company, such as retired consultants and directors.  While this policy has enhanced our ability to achieve our goals without impacting cash flow, the related non-cash expense has been significant.  During the fiscal year 2012, we incurred approximately $480,000 in non-cash, stock-based compensation expense compared to $142,863 for the same period in 2011.  We expect this trend to continue in the foreseeable future or until we can obtain additional capital financing.  The use of non-resident personnel, which primarily includes consultants and directors, has also increased the travel related costs.


Sales related expenses, such as travel expenses, sales commissions and advertising, also contributed to the increase in SG&A. During the fiscal year 2012, sales related travel expenses increased approximately $44,000 over the prior year.  In addition, sales commissions on chemical sales to licensees increased approximately $38,000 and sales commissions to the sales group increased approximately $56,000 over the prior fiscal year.  Advertising and other marketing costs increased approximately $14,000 during fiscal 2012 over the prior year.


Warranty expense, primarily related to the forklift tire failures that occurred in the second quarter, was also a contributing factor to the increase in SG&A.  As a result of the forklift tire failures in the second quarter, a number of customers and distributors returned their entire forklift tire inventory along with the tires that failed. In order to retain its customers and dealers, the Company was forced to accept the return of the forklift tires. All of the returned forklift tires are being held at the east coast distribution warehouse located in Ravenna, Ohio.  Management hopes to sell those tires to international customers on an "as is" basis at a reduced priced.  During fiscal 2012, we recorded a loss of approximately $47,000 primarily related to the forklift tire failures.  As of June 30, 2012, we held approximately $55,000 of the returned forklift inventory at our Ravenna distribution center.  We may incur additional losses if our plan to dispose of the returned forklift tires is unsuccessful.


15

Table of Contents

Research and development expenses .  Research and development expenses for the year ended June 30, 2012 were $10,032, and 56.0% decrease in the research and development expenses for fiscal 2011 of $22,795.  Research and development expenses are largely limited to product improvement and specific customer requests.

Consulting expenses .  Consulting expenses for the year ended June 30, 2012 were $90,257 compared to consulting expenses of 127,188 for fiscal 2011.  The Board of Directors has engaged a number of management, financial and manufacturing consultants to assist in the management of the Company. Consulting expenses are expected to fluctuate from time to time due to the need for qualified personnel to assist us with production and system needs.

Depreciation and amortization expenses .  Depreciation and amortization for the year ended June 30, 2012 were $212,056 compared to $238,251 for fiscal 2011.  The 11% decrease between years is primarily due to an increase in the number of fully depreciated assets.

Net loss .  The net loss for the year ended June 30, 2012 of $1,175,019 represents a 39.7% increase from the net loss for the year ended June 30, 2011 of $841,133.  The increase in the net loss is primarily due to higher cost of revenues resulting from negative purchase price variances on raw materials and higher SG&A expenses relating to stock based compensation and selling costs associated with increased sales activity.

Liquidity and Capital Resources

Our principal sources of liquidity consist of cash and cash equivalents and payments received from our customers.  We do not have any significant credit arrangements.  Historically, our expenses have exceeded our revenues, resulting in operating losses.  From time to time we have obtained additional liquidity to fund our operations through the sale of shares of our common and preferred stock, and the placement of short-term debt instruments.  In assessing our liquidity, management reviews and analyzes our current cash, short-term investments, accounts receivable, accounts payable, capital expenditure commitments and other obligations.


Cash Flows

The following table sets forth our consolidated cash flows for the fiscal years ended June 30, 2012 and 2011.

Years ended June 30,

2012

2011

(In 000's)

Net cash used by operating activities

$

(213

)

$

(600

)

Net cash used in investing activities

(99

)

(107

)

Net cash provided by financing activities

289

771

Net increase (decrease) in cash and cash equivalents during period

$

(23

)

$

64

Net Cash Used By Operating Activities. Our primary sources of operating cash during fiscal 2012 came from collected accounts receivable and the reduction of raw material and finished goods inventory levels.  Our primary uses of operating cash are payments made to our vendors and employees.  Net cash used by operating activities was $212,509 for the year ended June 30, 2012 compared to $599,796 for the same period in 2011.  The decrease in cash used in operating activities is primarily due to improved collections utilizing favorable payment terms and efforts to increase inventory turnover and reducing standing inventory levels.


Non-cash items include depreciation and amortization, and stock based compensation.  Our net loss was $1,175,019 for the year ended June 30, 2012 compared to a net loss of $841,133 for the same period in 2011.  The net loss for fiscal 2012 included non-cash expenses of $330,160 and $150,000 for stock-based compensation and accrued stock-based compensation for services, respectively.  In fiscal 2011, stock-based compensation and accrued stock-based compensation for services were $93,549 and 49,314, respectively.

16

Table of Contents


Net Cash Used In Investing Activities.   Net cash used by investing activities was $98,603 for the year ended June 30, 2012 and $107,336 for the same period in 2011.  The primary sources and uses of cash flow from investing activities for the year ended June 30, 2012 were related to the sale and acquisition of property and equipment of $79,749, and investments in patents of $18,854.


Net Cash Provided by Financing Activities .  During the fiscal year ended June 30, 2012, the primary sources and uses of cash from financing activities were proceeds from preferred stock subscriptions of $260,000; proceeds from the settlement of a note receivable of $100,000; cash receipts from the exercise of stock options of $51,000; and cash paid to retire notes payable of $110,000.


Contractual Obligations and Commitments

The following table summarizes our contractual cash obligations and other commercial commitments at June 30, 2012.

Payments due by period

Total

Less than

1 year

1 to 3 years

3 to 5 years

After

5 years

Facility lease (1)

$

264,000

$

132,000

$

132,000

$

-

$

-

Total contractual cash obligations

$

264,000

$

132,000

$

132,000

$

-

$

-

(1)  In June 2012, we negotiated an extension to the lease for our executive and manufacturing facilities located at 1501 Industrial Road, Boulder City, Nevada.  The property consists of a 49,200 square-foot building, which includes approximately 5,500 square-feet of office space, situated on approximately 4.15 acres.  The two year lease extension commenced on July 1, 2012 and the base rent was reduced $4,000 per month to $11,000 per month.  All other terms and conditions of the building lease remain in effect.


Cash Position, Outstanding Indebtedness, and Future Capital Requirements


Our total indebtedness at June 30, 2012 was $1,276,924 and our total cash was $105,838, none of which is restricted. Our total indebtedness at June 30, 2012 includes $376,721 in accounts payable, $356,986 in accrued expenses, $450,000 in convertible notes, $27,014 in current portion of long term debt, $9,018 in convertible note accrued interest and $3,345 in deferred revenues. We also have $53,840 in long-term liabilities.


Over the past several months, the Company has revised its overall business and financing strategy.  While management is still intent on focusing on the profitable product lines, there are a significant number of revenue growth opportunities that are being lost due to existing cash flow constraints.  Therefore, management hopes to adopt an aggressive business plan that involves the acquisition of production equipment to achieve higher production output, and to maintain sufficient raw material inventory levels to capitalize on revenue growth opportunities.  This aggressive business strategy can only be implemented with additional financing.  Therefore, the Company has increased its efforts to obtain financing through means that heretofore may not have been previously considered such as preferred stock offerings and government backed loans.  If we are unable to obtain the necessary financing to execute an aggressive strategy, then the Company will have to revert to a slow-growth, cash sustainable plan.


Although we believe that we can successfully implement either of these business plans, management cannot give any assurances that it will be able to do so.  Our business plans assume that, among other items, our revenues will increase from the sale of the new product lines, our raw materials expenses may increase, and our expenses from operations will decrease as a percentage of sales due to the cost reduction measures already implemented.


Our financial statements are prepared using generally accepted accounting principles applicable to a going concern which contemplates the realization of assets and liquidation of liabilities in the normal course of business. We have historically incurred significant losses which have resulted in a total retained deficit of $58,062,103 at June 30, 2012, which raises substantial doubt about our ability to continue as a going concern (See Note 5 to the attached financial statements). The accompanying financial statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result from the outcome of this uncertainty.


17

Table of Contents

To supplement our cash needs at the end of fiscal year 2012 and into fiscal 2013, we conducted a private placement of convertible preferred stock (the "Series A Shares). As of the filing date, the Company has received and accepted subscriptions for the purchase of 885,000 shares of its Series A Shares.   


In connection with the preparation of our financial statements for the year ended June 30, 2012, we have analyzed our cash needs for fiscal 2013. Based on this analysis, we have concluded that our available cash, including the cash raised in the private placement of convertible preferred stock, should be sufficient to meet our minimum cash requirements for fiscal 2013 for a slow-growth, cash sustainable plan. However we may need additional capital if our sales revenues do not meet our expectations.  Furthermore, we will need a significant capital investment if we are to implement our aggressive business strategy.


Our ability to obtain further financing through the offer and sale of our securities is subject to market conditions and other factors beyond our control. We cannot assure you that we will be able to obtain financing on favorable terms or at all.  If our cash is insufficient to fund our business operations, our business operations could be adversely affected in the event we do not obtain additional financing and are unable to obtain such funding when needed.   Insufficient funds may require us to delay, scale back or eliminate expenses and or employees. If we cannot generate adequate sales of our products, or increase our revenues through other means, then we may be forced to cease operations.


Off-Balance Sheet Arrangements

We do not currently have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. In addition, we do not engage in trading activities involving non-exchange traded contracts.

Recent Accounting Pronouncements

In the first quarter of 2010, the FASB issued ASU 2010-09, Subsequent Events: Amendments to Certain Recognition and Disclosure Requirements (ASU 2010-09). ASU 2010-09 amends ASC 855, Subsequent Events, so that SEC filers are no longer required to disclose the date through which subsequent events have been evaluated in financial statements. We adopted the provisions of ASU 2010-09 in the first quarter of 2010. This adoption did not affect our financial statements.


IT EM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK


We are exposed to changes in prevailing market interest rates affecting the return on our investments but do not consider this interest rate market risk exposure to be material to our financial condition or results of operations.  We invest primarily in United States Treasury instruments with short-term (less than one year) maturities.  The carrying amount of these investments approximates fair value due to the short-term maturities.  Under our current policies, we do not use derivative financial instruments, derivative commodity instruments or other financial instruments to manage our exposure to changes in interest rates or commodity prices.

ITE M 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA


Our financial statements required by this item are included on the pages immediately following the Index to Financial Statements appearing on page F-1.


ITE M 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE


There have been no changes in our independent accountants, HJ & Associates, LLC, or disagreements with them on matters of accounting or financial disclosure.


18

Table of Contents


IT EM 9A. CONTROLS AND PROCEDURES


We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our reports under the Securities Exchange Act of 1934, as amended, is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission's rules and forms, and that such information is accumulated and communicated to our management, including our principal executive and financial officer, as appropriate, to allow timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management necessarily was required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.


As required by SEC Rule 13a-15(b), an evaluation was performed under the supervision and with the participation of our management, including our principal executive and financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934) as of the end of the period covered by this report. Based upon that evaluation, our management, including our principal executive and financial officer, concluded that the design and operation of these disclosure controls and procedures were not effective for the period covered by this report, in particular due to our inability to timely file our quarterly reports for our fiscal quarters ended September 30, 2011, December 31, 2012, and March 31, 2012.


During the fourth quarter of fiscal year 2011 and the first three quarters of the current fiscal year we initiated efforts to improve our internal controls testing.  In the current quarter, we have completed the process of updating our controls and the associated testing for assessment purposes to ensure future compliance.

We have also updated our quarterly and year-end closing procedures to avoid audit adjustments and delays in the completion of the financial statements.   We are continuing to work to address this weakness by seeking to have sufficient personnel available and cross-trained to close the books in a timely fashion ensuring that they are complete and accurate.


MANAGEMENT'S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING


We are responsible for the preparation and integrity of our published financial statements. The financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America and, accordingly, include amounts based on judgments and estimates made by our management. We also prepared the other information included in the annual report and are responsible for its accuracy and consistency with the financial statements.


We are responsible for establishing and maintaining a system of internal control over financial reporting, which is intended to provide reasonable assurance to our management and Board of Directors regarding the reliability of our financial statements. The system includes but is not limited to:


·  

a documented organizational structure and division of responsibility;


·  

established policies and procedures, including a code of conduct to foster a strong ethical climate which is communicated throughout the company;


·  

regular reviews of our financial statements by qualified individuals; and


·  

the careful selection, training and development of our people.


19

Table of Contents

There are inherent limitations in the effectiveness of any system of internal control, including the possibility of human error and the circumvention or overriding of controls. Also, the effectiveness of an internal control system may change over time. We have implemented a system of internal control that was designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements in accordance with generally accepted accounting principles.


We have assessed our internal control system in relation to criteria for effective internal control over financial reporting described in "Internal Control-Integrated Framework" issued by the Committee of Sponsoring Organizations (COSO) of the Treadway Commission. Based upon these criteria, we have remediated a weakness in our internal controls testing and are working to complete changes in our quarterly and year-end closing procedures to insure timeliness. However, due to these weaknesses, our principal executive and financial officer has concluded that our internal control over financial reporting was ineffective for the period covered by this Report.


Amerityre Corporation


September 28, 2012


By:


/s/ Timothy L. Ryan                   

Timothy L. Ryan

Principal Executive and Financial Officer



This annual report does not include an attestation report of the Company's registered public accounting firm regarding internal control over financial reporting. Management's report was not subject to attestation by the Company's registered public accounting firm pursuant to temporary rules of the Securities and Exchange Commission that permit the company to provide only management's report in this annual report.



ITE M 9B. OTHER INFORMATION


None.

PA RT III

The information called for by Part III of Form 10-K (Item 10-Directors, Executive Officers and Corporate Governance of the Registrant, Item 11-Executive Compensation, Item 12-Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters, Item 13-Certain Relationships and Related Transactions, and Director Independence, and Item 14-Principal Accounting Fees and Services) is incorporated by reference from our proxy statement related to our 2012 annual meeting of shareholders, which will be filed with the Securities and Exchange Commission not later than October 28, 2012 (120 days after the end of the fiscal year covered by this Annual Report on Form 10-K).

20

Table of Contents


PART IV


IT EM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES


(a)           Documents filed with this report.


1.           Financial Statements:

See Index to Financial Statements on page F-1


2.           Financial Statement Schedules:

Financial statement schedules are omitted because they are not required or are not applicable or the required information is shown in the financial statements or notes thereto.


3.           Exhibits:

The exhibits to this report are listed on the Exhibit Index below.

(b)           Description of exhibits


Exhibit

Number

Description

3.1

Articles of Incorporation of the Company (incorporated by reference to Exhibit 3.01 to our registration statement on Form 8-A12G (File No. 000-50053)).

3.2

Certificate of Amendment to the Articles of Incorporation of the Company (incorporated by reference to Exhibit 3 to our current report on Form 8-K dated November 17, 2004).

3.3

Bylaws of the Company (incorporated by reference to Exhibit 3.02 to our registration statement on Form 8-A12G (File No. 000-50053)).

4.1

Form of Stock Certificate (incorporated by reference to Exhibit 4.01 to our registration statement on Form 8-A12G (File No. 000-50053)).

31.1

Certification of Principal Executive and Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

32.1

Certification of Principal Executive and Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted, pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

101 INS

XBRL Instance Document*

101 SCH

XBRL Taxonomy Extension Schema Document*

101 CAL

XBRL Taxonomy Extension Calculation Linkbase Document*

101 DEF

XBRL Taxonomy Extension Definition Linkbase Document*

101 LAB

XBRL Taxonomy Extension Label Linkbase Document*

101 PRE

XBRL Taxonomy Extension Presentation Linkbase Document*

*Pursuant to Rule 405 ( a )(2) of Regulation S-T, the Company will furnish the XBRL Interactive Data Files with detailed footnote tagging as Exhibit 101 in an amendment to this Form 10-K within the permitted 30-day grace period granted for the first period in which detailed footnote tagging is required.

21

Table of Contents


SIGNATURES


Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.


Dated:  September 28, 2012

AMERITYRE CORPORATION

By: /s/Timothy L. Ryan

Timothy L. Ryan

Chief Executive Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities indicated on the 28 th day of September 2012.

/s/ Timothy L. Ryan

/s/ Gary Tucker

Timothy L. Ryan

Chairman of the Board and Chief Executive Officer

(Principal Executive and Financial Officer)

Gary M. Tucker

Director

/s/Wayne Arnett

/s/ John J. Goldberg

Wayne Arnett

Director

John J. Goldberg

Director

/s/ Brian W. Hesje

Brian W. Hesje

Director

22

Table of Contents

AMERITYRE CORPORATION


INDEX TO FINANCIAL STATEMENTS

Audited Financial Statements

Report of Independent Registered Public Accounting Firm

F-2

Balance Sheets as of June 30, 2012 and 2011

F-3

Statements of Operations for the years ended June 30, 2012 and 2011

F-5

Statements of Stockholders' Equity for the years ended June 30, 2012 and 2011

F-6

Statements of Cash Flows for the years ended June 30, 2012 and 2011

F-8

Notes to Financial Statements

F-9

F-1

Table of Contents

REP ORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM



To the Board of Directors

Amerityre Corporation

Boulder City, Nevada



We have audited the accompanying balance sheets of Amerityre Corporation as of June 30, 2012 and 2011, and the related statements of operations, stockholders' equity, and cash flows for the years then ended. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.


We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.


In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of Amerityre Corporation as of June 30, 2012 and 2011, and the results of its operations and its cash flows for the years then ended in conformity with U.S. generally accepted accounting principles.


The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 5 to the financial statements, the Company has suffered recurring losses from operations that have resulted in an accumulated deficit.  This raises substantial doubt about the Company's ability to continue as a going concern.  Management's plans in regard to these matters are also described in Note 5. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.



/s/ HJ & Associates, LLC

Salt Lake City, Utah

September 28, 2012

F-2

Table of Contents

AME RITYRE CORPORATION

Balance Sheets

June 30, 2012

June 30, 2011

ASSETS

CURRENT ASSETS

  Cash

$

105,838

$

127,990

  Accounts receivable – net

400,458

583,025

 Accounts receivable-related party - net

22,981

4,976

  Inventory

553,578

696,220

  Deferred debt issuance cost

-

8,522

  Prepaid and other current assets

67,210

79,260

     Total Current Assets

1,150,065

1,499,993

PROPERTY AND EQUIPMENT

  Leasehold improvements

162,683

162,683

  Molds and models

744,611

707,020

  Equipment

2,959,233

3,012,870

  Leased Equipment

27,900

27,900

  Furniture and fixtures

100,142

100,142

 Construction in Progress

30,122

-

  Software

309,425

286,046

  Less – accumulated depreciation

(3,651,903

)

(3,488,756

)

     Total Property and Equipment

682,213

807,905

OTHER ASSETS

  Patents and trademarks – net

531,222

541,826

  Deposits

36,000

36,000

     Total Other Assets

567,222

577,826

TOTAL ASSETS

$

2,399,500

$

2,885,724

The accompanying notes are an integral part of these financial statements.

F-3

Table of Contents

AMERITYRE CORPORATION

Balance Sheets (Continued)


June 30, 2012

June 30, 2011

LIABILITIES AND STOCKHOLDERS' EQUITY

CURRENT LIABILITIES

  Accounts payable

$

376,721

$

459,820

  Convertible notes

450,000

755,800

  Accrued expenses

356,986

153,203

  Current portion of  long term debt

27,014

42,160

  Interest accrued on convertible notes

9,018

37,472

 Deferred Revenue

3,345

-

  Deferred directors compensation

-

80,793

     Total Current Liabilities

1,223,084

1,529,248

  Long term debt

53,840

53,840

      Total Long Term Debt

53,840

53,840

TOTAL LIABILITIES

1,276,924

1,583,088

COMMITMENTS AND CONTINENCIES  (NOTE 2)

STOCKHOLDERS' EQUITY

   Preferred stock: 5,000,000 shares authorized of $0.001 par value, -0-   shares issued and outstanding

-

-

  Common stock: 40,000,000 shares authorized of $0.001 par value, 34,176,620 and 32,251,297 shares issued and outstanding, respectively

34,176

32,251

  Additional paid-in capital

58,890,503

58,500,707

 Stock subscription payable

260,000

-

  Notes receivable

-

(343,238

)

  Retained deficit

(58,062,103

)

(56,887,084

)

     Total Stockholders' Equity

1,122,576

1,302,636

TOTAL LIABILITIES AND STOCKHOLDERS' EQUITY

$

2,399,500

$

2,885,724

The accompanying notes are an integral part of these financial statements.

F-4

Table of Contents

AME RITYRE CORPORATION

Statements of Operations

For the Years Ended June 30,

2012

2011

NET REVENUES

  Products

$

4,315,756

$

3,679,040

  Equipment

49,000

-

    Total Net Revenues

4,364,756

3,679,040

COST OF REVENUES

  Products

2,793,540

2,329,139

  Equipment

39,845

-

    Total Cost of Revenues

2,833,385

2,329,139

GROSS PROFIT

1,531,371

1,349,901

EXPENSES

 Consulting

90,257

127,188

 Depreciation and amortization

212,056

238,251

 Research and development

10,032

22,795

 Bad debt expense

18,805

36,693

 Selling, general and administrative

2,352,053

1,839,459

   Total Expenses

2,683,203

2,264,386

LOSS FROM OPERATIONS

(1,151,832

)

(914,485

)

OTHER INCOME/(EXPENSE)

 Gain on settlement of accrued liability

-

110,000

 Gain on sale of assets

9,031

6,000

 Interest income

9,332

15,081

 Miscellaneous income

-

21,220

 Interest expense

(41,550

)

(78,949

)

   Total Other Income/Expense

(23,187

)

73,352

NET LOSS

$

(1,175,019

)

$

(841,133

)

BASIC AND DILUTED LOSS PER SHARE

$

(0.04

$

(0.03

)

WEIGHTED AVERAGE NUMBER OF SHARES OUTSTANDING

33,377,620

32,064,182

The accompanying notes are an integral part of these financial statements.

F-5

Table of Contents

AM ERITYRE CORPORATION

Statements of Stockholders' Equity

Common Stock

Shares

Amount

Additional Paid-in Capital

Notes Receivable

Accrued Interest

Accumulated Deficit

Balance, June 30, 2010

31,819,385

$

31,819

$

58,339,476

$

(395,067

)

$

(1,461

)

$

(56,045,951

)

Common stock issued to director for additional services at $0.36 per share

25,000

25

8,975

-

-

-

Common stock issued for services at$0.35 per share

142,856

143

49,857

-

-

-

Common stock issued for services at $0.38 per share

76,482

76

28,987

-

-

-

Common stock issued for board compensation at $0.29 per share

158,608

159

45,837

-

-

-

Common stock issued for services at $0.29 per share

5,000

5

1,445

-

-

-

Common stock issued for employment settlement at $0.29 per share

68,966

69

19,931

-

-

-

Common stock issued for employment settlement at $0.27 per share

75,000

75

20,175

-

-

-

Accrued interest on note receivable

-

-

-

-

(4,343

)

-

Payment on note receivable and accrued interest

(120,000

)

(120

)

(42,080

)

51,830

5,804

-

Reversal of previously recorded stock based compensation

-

-

(15,829

)

-

-

-

Accrued stock based compensation

-

-

43,932

-

-

-

Net loss for the year ended June 30, 2011

-

-

-

-

-

(841,133

)

Balance, June 30, 2011

32,251,297

$

32,251

$

58,500,707

$

(343,238

)

$

-

$

(56,887,084

)

The accompanying notes are an integral part of these financial statements.

F-6

Table of Contents

AMERITYRE CORPORATION

Statements of Stockholders' Equity

Common Stock
Shares Amount

Additional Paid-in Capital

Notes Receivable

Accrued Interest

Accumulated Deficit

Balance, June 30, 2011

32,251,297 $ 32,251 $ 58,500,706 $ (343,238 ) $ - $ (56,887,084 )

Common stock issued to director for additional services at $0.17 per share

100,000 100 16,900 - - -

Common stock issued for officer compensation at $0.17 per share

100,000 100 16,900 - - -

Common stock issued for consulting services at $0.24 per share

100,000 100 23,900 - - -

Common stock issued for conversion of note payable at $0.35 per share

516,571 516 180,283 - - -

Common stock issued to directors for additional services at $0.40 per share

94,000 94 37,506 - - -

Common stock issued for officer compensation at $0.40 per share

50,000 50 19,951 - - -

Common stock issued in conversion of notes payable at $0.35 per share

42,858 43 14,957 - - -

Common stock issued to directors for additional services at $0.27 per share

160,000 160 43,040 - -

Common stock Issued as officer compensation at $0.27 per share

100,000 100 26,900 - - -

Common stock issued in option exercise at $0.17 per share

300,000 300 50,700 - - -

Common stock issued to director for additional services at $0.34 per share

100,000 100 33,900 - - -

Common stock issued for board compensation at $0.29 per share

211,894 212 61,237 - - -

Common stock issued for employee compensation at $0.28 per share

50,000 50 13,950 - - -

Stock based compensation expense

- - 92,911 - -

Deposits on preferred stock subscriptions

- - - 260,000 - -

Settlement of note payable

- - (243,238 343,238 - -
Net loss for the year ended June 30, 2012 - - - - - (1,175,019 )
Balance, June 30, 2012 34,176,620 $ 34,176 $ 58,890,503 $ 260,000 $ - $ (58,062,103 )

The accompanying notes are an integral part of these financial statements.

F-7

Table of Contents

AM ERITYRE CORPORATION

Statements of Cash Flows

For the Years Ended June 30,

2012

2011

CASH FLOWS FROM OPERATING ACTIVITIES

Net Loss

$

(1,175,019

)

$

(841,133

)

Adjustments to reconcile net loss to net cash used by operating activities:

Depreciation & amortization expense

243,930

238,251

Change in allowance for bad debt  (21, 819 )  (178,400 )

Gain on sales of assets

(9,031

)

(5,237

)

Stock based compensation

330,160

93,549

Accrued stock based compensation

150,000

49,314

Gain on settlement of accrued liability

-

(110,000

)

Amortization of debt issuance cost

-

41,478

Changes in operating assets and liabilities:

Decrease in accounts receivable

186,379

60,574

(Increase)/decrease in prepaid and other current assets

6,433

(52,600

)

Decrease in other assets

8,522

-

Decrease in accrued interest

-

(4,410

)

(Increase)/decrease in inventory and change in inventory reserve

148,258

(140,893

)

(Decrease)/increase in accounts payable and accrued expenses

(80,322

)

249,711

       Net Cash Used by Operating Activities

(212,509

)

(599,796

)

CASH FLOWS FROM INVESTING ACTIVITIES

  Cash paid for patents and trademarks

(18,854

)

5,099

  Proceeds from the sale of property and equipment

20,500

6,000

  Purchase of property and equipment

(100,249

)

(118,435

)

       Net Cash Used by Investing Activities

(98,603

)

(107,336

)

CASH FLOWS FROM FINANCING ACTIVITIES

  Proceeds from the sale of convertible note

-

755,800

  Retirement of convertible Notes

(110,000

)

-

  Proceeds from payments and settlement of note receivable

100,000

15,500

  Payments on long-term debt

(12,040

)

-

  Stock issuance of for exercise of options

51,000

-

  Proceeds from stock subscription

260,000

-

       Net Cash Provided by Financing Activities

288,960

771,300

NET (DECREASE) INCREASE IN CASH

(22,152

)

64,168

CASH AT BEGINNING OF YEAR

127,990

63,822

CASH AT END OF YEAR

$

105,838

$

127,990


NON-CASH FINANCING ACTIVITES


During the years ended June 30, 2012 and 2011, the Company paid $63,234 and $0 for interest, respectively. Also, there were no cash payments of taxes for the years ended June 30, 2012 and 2011, respectively.


For the Years Ended June 30,

2012

2011

SUPPLEMENTAL SCHEDULE OF CASH FLOW ACTIVITIES

Common stock issued on note conversion

$

195,800

$

-

Common stock issued for accrued stock compensation

$

58,000

$

-

Commission accrual decreasing note payable

$

3,106

$

-


The accompanying notes are an integral part of these financial statements.

F-8

Table of Contents

AM ERITYRE CORPORATION

Notes to the Financial Statements

June 30, 2012 and 2011


NOTE 1 - ORGANIZATION AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES


a. Organization


Amerityre Corporation, (the "Company") was incorporated under the laws of the State of Nevada on January 30, 1995, under the name American Tire Corporation. The Company was organized to take advantage of existing proprietary and non-proprietary technology available for the manufacturing of specialty tires. The Company engages in the manufacturing, marketing, distribution and sales of "flatfree" specialty tires and tire-wheel assemblies and currently is manufacturing these tires at its manufacturing facility located in Boulder City, Nevada. During the year ended June 30, 2001, the name of the Company was changed to Amerityre Corporation.


b. Accounting Method


The Company's financial statements are prepared using the accrual method of accounting. The Company has elected a June 30 year-end.


c. Reclassifications


Prior period amounts have been adjusted to conform to the current year presentation.


d. Basic and Fully Diluted Net Loss per Share


Basis and Fully Diluted net loss per share is computed using the weighted-average number of common shares outstanding during the period.


2012

2011

Loss (numerator)

$

(1,175,019

$

(841,133

)

Shares (denominator)

33,377,620

32,064,182

Per share amount

$

(0.04

$

(0.03

)


The Company's outstanding stock options, warrants, and shares issuable upon conversion of outstanding convertible notes have been excluded from the diluted net loss per share calculation. The Company excluded a total of 2,644,429 and 225,000 common stock equivalents for the years ended June 30, 2012 and 2011, respectively because they are anti-dilutive.


e. Estimates


The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

f. Income Taxes


Deferred taxes are provided on a liability method whereby deferred tax assets are recognized for deductible temporary differences and operating loss and tax credit carry-forwards and deferred tax liabilities are recognized for taxable temporary differences. Temporary differences are the differences between the reported amounts of assets and liabilities and their tax bases. Deferred tax assets are reduced by a valuation allowance when, in the opinion of management, it is more likely than not that some portion or all of the deferred tax assets will not be realized. Deferred tax assets and liabilities are adjusted for the effects of changes in tax laws and rates on the date of enactment.

F-9

Table of Contents

AMERITYRE CORPORATION

Notes to the Financial Statements

June 30, 2012 and 2011


Net deferred tax assets consist of the following components as of June 30, 2012 and 2011:

2012

2011

Deferred tax assets:

NOL Carryover

$

17,563,700

$

17,459,069

Section 1231 Loss Carryover

1,000

-

Allowance for Doubtful Accounts

14,500

22,998

Related Party Accruals

24,400

24,375

Accrued Compensation

-

46,508

Inventory Reserve

13,000

17,564

R & D Carryover

195,400

195,374

Accrued Vacation

5,000

-

Deferred tax liabilities:

Depreciation

(154,800

(235,115

)

Accrued Vacation

-

(3,833)

Valuation Allowance

(17,662,200

(17,526,940

)

Net deferred tax asset

$

-

$

-


The income tax provision differs from the amount of income tax determined by applying the U.S. federal income tax rate to pretax income from continuing operations for the years ended June 30, 2012 and 2011 due to the following:

2012

2011

Book Income

$

(458,300

$

(328,042

)

Depreciation

18,900

(30,685

)

Meals & Entertainment

3,600

2,176

Stock for Services

187,300

78,940

Accrued Vacation

1,100

3,833

Inventory Reserve

(4,500)

(218

)

Receivable Reserve

(8,500)

(69,576

)

Gain/(Loss) on Asset Disposal

2,600

(38

)

Accrued Compensation

(46,500

(11,993

)

Accrued Liability Settlement

-

42,900

Valuation Allowance

304,300

312,703

$

-

$

-

At June 30, 2012, the Company had net operating loss carry-forwards of approximately $45,035,000 that may be offset against future taxable income from the year 2013 through 2032. No tax benefit has been reported in the June 30, 2012 financial statements since the potential tax benefit is offset by a valuation allowance of the same amount. Due to the change in ownership provisions of the Tax Reform Act of 1986, net operating loss carry-forwards for Federal income tax reporting purposes are subject to annual limitations. Should a change in ownership occur, net operating loss carry-forwards may be limited as to use in future years.


ASC 740 requires a company to determine whether it is more likely than not that a tax position will be sustained upon examination based on the technical merits of the position. If the more-likely-than-not threshold is met, a company must measure the tax position to determine the amount to recognize in the financial statements. As a result of the implementation of ASC 740, the Company performed a review of its material tax positions in accordance with recognition and measurement standards established by ASC 740.


The Company files income tax returns in the U.S. federal jurisdiction, and in Utah.  With few exceptions, the Company is no longer subject to U.S. federal, state and local, or non-U.S. income tax examinations by tax authorities for years before 2008.


We adopted the provisions of Accounting Standards Codification 740, Income Taxes (ASC 740) , on January 1, 2007. The Company's policy is to recognize interest accrued related to unrecognized tax benefits in interest expense and penalties in operating expenses. As of June 30, 2012 the Company had no accrued interest or penalties related to uncertain tax positions.

F-10

Table of Contents

AMERITYRE CORPORATION

Notes to the Financial Statements

June 30, 2012 and 2011


g. Inventory


Inventory is stated at the lower of cost (computed on a first-in, first-out basis) or market. The cost of finished goods includes the cost of raw material, direct and indirect labor, and other indirect manufacturing costs. The inventory consists of chemicals, finished goods produced in the Company's plant and products purchased for resale.

2012

2011

Raw Materials

$

201,651

$

228,580

Finished Goods

351,927

467,641

Total Inventory

$

553,578

$

696,221


We had an inventory reserve amount of $33,448 and $45,036 recorded as of June 30, 2012 and 2011, respectively, for items that were deemed to be slow moving based on an analysis of all inventories on hand.


h. Property and Equipment


Property and equipment are stated at cost. Expenditures for small tools, ordinary maintenance and repairs are charged to operations as incurred. Major additions and improvements are capitalized. When we retire or dispose of assets, the costs and accumulated depreciation or amortization are removed from the respective accounts and we recognize any related gain or loss. Repairs and maintenance are charged to expense when incurred. Major replacements that substantially extend the useful life of an asset are capitalized and depreciated. Depreciation is computed using the straight-line method over estimated useful lives as follows:


Leasehold improvements

5 years, or over lease term

Equipment

5 to 10 years

Furniture and fixtures

7 years

Automobiles

5 years

Software

3 years

Depreciation expense for the years ended June 30, 2012 and 2011 was $214,472 and $208,874, respectively.


i. Revenue Recognition


Revenue for products is recognized when the sales amount is determined, shipment of goods to the customer has occurred and collection is reasonably assured. Generally, we ship all of our products FOB origination. License fee revenue is recognized as earned, and no revenue is recognized until the inception of the license term.


j. Patents and Trademarks


Patent and trademark costs have been capitalized at June 30, 2012, totaling $760,530 with accumulated amortization of $229,308 for a net book value of $531,222. Patent and trademark costs capitalized at June 30, 2011 totaled $741,676 with accumulated amortization of $199,850 for a net book value of $541,826. The patents which have been granted are being amortized over a period of 20 years. Patents which are pending or are being developed are not being amortized. Amortization will begin once the patents have been issued. Included in the total patent and trademark costs are $247,264 of patent and trademark costs pending that are not currently being amortized.  Amortization expense for the years ended June 30, 2012 and 2011 was $29,458 and $29,377 respectively.  The Company evaluates the recoverability of intangibles and reviews the amortization period on a continual basis utilizing the guidance of Accounting Standards Codification 350, Intangibles – Goodwill and Other (ASC 350). Several factors are used to evaluate intangibles, including, but not limited to, management's plans for future operations, recent operating results and projected, undiscounted cash flows.


The estimated amortization expense, based on current intangible balances, for the next five fiscal years beginning July 1, 2012 is as follows:

2013

$

28,722

2014

$

28,610

2015

$

28,610

2016

$

28,610

2017

$

28,610


F-11

Table of Contents

AMERITYRE CORPORATION

Notes to the Financial Statements

June 30, 2012 and 2011


k. Advertising


The Company follows the policy of charging the costs of advertising to expense as incurred.  Advertising expense for the years ended June 30, 2012 and 2011 was $19,154 and $5,876, respectively.


l. Stock Based-Compensation Expense


Since July 2005, we account for stock-based compensation under the provisions of Accounting Standards Codification 718, Compensation – Stock Compensation (ASC 718), formerly SFAS 123(R). Our financial statements as of and for the fiscal years ended June 30, 2012 and 2011 reflect the impact of ASC 718. Stock-based compensation expense recognized under ASC 718 for the fiscal years ended June 30, 2012 and 2011 was $92,910 and $43,932, respectively, related to employee stock options.


ASC 718 requires companies to estimate the fair value of share-based payment awards on the date of grant using an option-pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service periods in our Statement of Operations. Stock-based compensation expense recognized in our Statements of Operations for fiscal years ended June 30, 2012 and 2011 assume all awards will vest; therefore no reduction has been made for estimated forfeitures.

m. Recent Accounting Pronouncements


There were no recent accounting pronouncements adopted by the Company during the year ended June 30, 2012.


n. Shipping and Handling


Shipping and Handling Fees require that freight costs charged to customers be classified as revenues. Freight expenses are included in costs of sales.


o. Trade Receivables


We generally charge-off trade receivables that are more than 120 days outstanding as bad-debt expense, unless management believes the amount to be collectable. The charge-off amounts are included in selling, general and administrative expenses.  For the fiscal years ended June 30 2012 and 2011, our bad debt expense was $18,805 and $36,693, respectively.


p. Equity Securities


Equity securities issued for services rendered have been accounted for at the fair market value of the securities on the date of authorization.


q. Concentrations of Risk


The Company maintains several accounts with financial institutions.  Currently, the accounts are insured by the Federal Deposit Insurance Corporation up to $250,000.


Credit losses, if any, have been provided for in the financial statements and are based on management's expectations. The Company's accounts receivable are subject to potential concentrations of credit risk. The Company does not believe that it is subject to any unusual risks or significant risks in the normal course of its business.


We have two customers who accounted for 33% and 37% of our sales for the years ended June 30, 2012 and 2011, respectively.

F-12

Table of Contents

AMERITYRE CORPORATION

Notes to the Financial Statements

June 30, 2012 and 2011

r. Valuation of Options and Warrants


The valuation of options and warrants granted to unrelated parties for services are measured as of the earlier of (1) the date at which a commitment for performance by the counterparty to earn the equity instrument is reached, or (2) the date the counterparty's performance is complete. The options and warrants will continue to be revalued in situations where they are granted prior to the completion of the performance.


s. Sales Tax


In accordance with FASB ASC 605-45, formerly EITF Issue No. 06-3, How Taxes Collected from Customers and Remitted to Government Authorities Should be Presented in the Income Statement , the Company accounts for sales taxes and value added taxes imposed on its good and services on a net basis in the consolidated statement of operations.


t. Cash and Cash Equivalents


We consider all highly liquid investments with a maturity of three months or less when purchased to be cash equivalents.


u. Product Warranties


The Company's standard sales terms include a limited warranty on workmanship and materials to the original purchaser if items sold are used in the service for which they are intended. Specifically the Company warrants wheels, bearings, and bushings for one year from the date of purchase. The Company estimates its warranty reserve based on historical experience with warranty claims and returns for defective items. As of June 30, 2012 and 2011, the Company has estimated its warranty reserve and has recorded a liability of $0 and $2,353, respectively.

v. Related Party Transactions

Amerityre's Chairman of the Board and Chief Executive Officer, Timothy L. Ryan, is also the principal owner of Rhino Rubber LLC, a manufacturing and distribution company for solid industrial tires and wheels.  During fiscal 2012 and fiscal 2011, Rhino Rubber LLC purchased a total of $24,141 and $27,383, respectively, in tire products from Ameritye.  As of June 30, 2012 and 2011, the accounts receivable balances for Rhino Rubber LLC were $22,981 and $4,976, respectively.  The terms and conditions of those related-party sales transactions, were the same as those afforded to any of Amerityre's customers.

A former board member, Silas O. Kines, who passed away on January 11, 2012, was also the principal owner of Forklift Tire of Florida and K-2 Industrial Tire, Inc.  Forklift Tire of Florida is a distributor primarily of Amerityre's forklift product line.  During fiscal 2012 and fiscal 2011, Forklift Tire of Florida purchased a total $21,663 and $10,413, respectively, in tire products from Amerityre.  As of June 30, 2012 and 2011, the accounts receivable balances for Forklift Tire of Florida were $9,255 and $10,479, respectively.  The terms and conditions of those related-party sales transactions were the same as those afforded to any of Amerityre's customers.  In accordance with the Commission Agreement, dated February 2, 2011, between Amerityre Corporation and K-2 Industrial Tire, Inc., K-2 is due a five percent (5%) commission on all forklift tire sales.  In exchange for the forklift models transferred to Amerityre under that agreement, the first $96,000 in commission payments will be used to extinguish to the long term liability recorded on the transaction.  As of June 30, 2012, $27,014 and $53,840 were recorded for the current and long-term portion, respectively, of the related liability. Since his passing, Mr. Kines is no longer considered a related party. As a result, the related receivables are not reflected as related party receivables on the balance sheet for the years ended June 30, 2012 and 2011.


NOTE 2 – COMMITMENTS AND CONTINGENCIES


In June 2012, we negotiated a two year extension of the lease on our executive office and manufacturing facility located at 1501 Industrial Road, Boulder City, Nevada.  The property consists of a 49,200 square foot building, which includes approximately 5,500 square feet of office space, situated on approximately 4.15 acres.   The extended lease commenced on July 1, 2012 and reduced the base rent to $11,000 per month.  All other terms and conditions of the building lease remain in effect.


Effective April 24, 2009, the Company's board of directors terminated the employment agreement between the Company and its President and Chief Executive Officer, Gary N. Benninger. Mr. Benninger's employment agreement had an expiration date of August 31, 2009. Mr. Benninger's employment agreement provided for termination payments and related accrued benefits.  On December 1, 2010, the Company negotiated a settlement with Mr. Benninger which resulted in the issuance of 68,966 shares of restricted common stock and a cash payment of $20,000.  The shares issued were valued at approximately $20,000 based on the closing price of $0.29 per share on December 1, 2010, the date of board approval.


Also in April 2009, the Company terminated the consulting agreements between the Company and Richard A. Steinke and Manuel Chacon, who had been providing the Company with technology development and chemical formulating services, respectively. Each consulting agreement had an expiration date of August 31, 2009. The consulting agreements did not have a provision for early termination. At June 30, 2009, the Company provided for the contingent liability resulting from these early terminations.

F-13

Table of Contents


AMERITYRE CORPORATION

Notes to the Financial Statements

June 30, 2012 and 2011


NOTE 3 – STOCK TRANSACTIONS


During the year ended June 30, 2012, the Company had the following stock transactions:


In July 2011, the Company issued an aggregate of 200,000 shares of restricted common stock to two of its directors for additional services provided during the quarter ended June 30, 2011. The total value of the shares issued was $34,000 based on the closing market price on the authorization date of $.017 per share.


Also in July 2011, the Company issued 100,000 shares of common stock to an outside consultant for services rendered during the second half of fiscal 2011. The value of the shares was $24,000 based on the closing price on the authorization date of $0.24 per share.

In December 2011, the Company issued an aggregate of 144,000 shares of restricted common stock to three of its directors for additional services provided during the quarter ended September 30, 2011. The total value of the shares issued was $57,600 based on the closing price on the authorization date of $0.40 per share.


In January 2012, the Company issued an aggregate of 260,000 shares of restricted common stock to three of its directors for additional services provided during the quarter ended December 31, 2011.  The total value of the shares issued was $70,200 based on the closing price on the authorization date of $0.27 per share.


In April 2012, the Company issued 300,000 shares of common stock in connection with the exercise of 300,000 stock options by three former directors.  The Company received aggregate proceeds of $51,000 based on an exercise price of $0.17 per share.


In May 2012, the Company issued 100,000 shares of restricted common stock to a director for additional services.  The value of the shares was $34,000 based on the closing price on the authorization date of $0.34 per share.


On June 22, 2012, the Company issued an aggregate of 211,894 shares of restricted common stock to its directors for board service for the year ended June 30, 2011.  The issuance was authorized on December 1, 2010 and the stock based compensation expense was recognized in December 2010.


Also in June 2012, the Company issued 50,000 shares of common stock to an employee for services rendered during the second half of fiscal 2012. The value of the shares was $14,000 based on the closing price on the authorization date of $0.28 per share.


NOTE 4 – STOCK OPTIONS AND WARRANTS


General Option Information


In July 2010, the Compensation Committee and the Board of Directors approved the grant of stock option awards to our former Chief Executive Office, Michael Kapral (200,000), our former Chief Financial Officer, Anders Suarez (100,000), our former Chief Operating Officer, James Moore (100,000), and our former Chemical Technician, Stephen Harold (50,000). The options are subject to vesting provisions such that one-half of the options are to vest only upon realization of the first profitable fiscal quarter (without including the expense related to the issuance of the options), with the remaining  one-half vesting upon realization of a minimum cumulative profit (4 consecutive profitable fiscal quarters) of $500,000.  The vesting is also contingent on continuing employment. The options are exercisable for three years at an exercise price of $0.50 per share.  The options granted to the aforementioned CEO and CFO were cancelled upon their separation of employment.


In July 2010, the Board of Directors also approved a grant of 50,000 stock options to each of our seven non-employee directors.  The options are subject to vesting provisions such that the options are to vest only upon realization of the first profitable fiscal quarter (without including the expense related to the issuance of the options).  The vesting is also contingent on service as a director for the period July 1, 2010 through June 30, 2011. The options are exercisable for three years at an exercise price of $0.50 per share.

On July 6, 2011, the Board of Directors cancelled the "2004 Non-Employee Directors' Stock Incentive Plan" and approved the " Directors' 2011 Stock Option and Award Plan".  The Company also maintains the 2005 Stock Option and Award Plan, which was previously approved by shareholders, for the purpose of granting option awards to its employees and consultants.   Under the 2011 Plan, a total of 3,300,000 shares are authorized for issuance.  Each non-executive director is eligible to receive, based on their length of service, options to purchase a total of 300,000 shares at that day's closing price, $0.17.  Any options issued will vest over a three year service period as follows: 100,000 on June 30, 2012, 100,000 on June 30, 2013 and 100,000 on June 30, 2014.  These options expire two years after vesting.  The Director who serves as Audit Chair during the fiscal year will receive an additional 50,000 options per year under the same terms.  CEO Timothy L. Ryan was granted 200,000 options per year under the same terms, under the 2005 Stock Option and Award Plan.

F-14

Table of Contents

AMERITYRE CORPORATION

Notes to the Financial Statements

June 30, 2012 and 2011

During the fiscal year ended June 30, 2012, we granted a total of 2,554,000 in stock options.

We use the Black-Scholes model to value stock options. The Black-Scholes model requires the use of employee exercise behavior data and the use of a number of assumptions including volatility of our stock price, the weighted average risk-free interest rate, and the weighted average expected life of the options. Because we do not pay dividends, the dividend rate variable in the Black-Scholes model is zero.


We estimated the fair value of the stock options at the grant date based on the following weighted average assumptions:

2012

2011

Risk free interest rate

.33% - .75 % 1.01 %

Expected life

1.5 – 5.0 Years

3.0 Years

Expected volatility

47.64% - 84.38 % 84.23 %

Dividend yield

0.00 % 0.00 %

A summary of the status of our outstanding stock options as of June 30, 2012 and June 30, 2011 and changes during the periods then ended is presented below:


June 30, 2012

June 30, 2011

Shares

Weighted Average

Exercise Price

Shares

Weighted Average

 Exercise Price

Outstanding beginning of period

675,000

$

 1.26

325,000

$

2.54

Granted

2,554,000

$

0.18

800,000

$

0.50

Expired/Cancelled

(350,000

$

0.31

(450,000

)

$

0.83

Exercised

(300,000

$

0.17

-

-

Outstanding end of period

2,579,000

$

0.45

675,000

$

1.26

Exercisable

1,079,000

$

0.73

225,000

$

2.79


The following table summarizes the range of outstanding and exercisable options as of June 30, 2012:


Outstanding

Exercisable

Range of

Exercise Prices

Number Outstanding at

June 30, 2012

Weighted

Average

Remaining

Contractual Life

Weighted

Average

Exercise Price

Number

Exercisable at

June 30, 2012

Weighted

Average Remaining

Contractual Life

$

0.17

650,000

2.00

$

0.17

650,000

2.00

0.17

550,000

3.00

0.17

-

3.00

0.17

550,000

4.00

0.17

-

4.00

0.25

150,000

0.50

0.25

150,000

0.50

0.29

154,000

3.00

0.29

54,000

3.00

0.50

300,000

1.02

0.50

-

1.02

1.79

125,000

0.87

1.79

125,000

0.87

$

4.04

100,000

0.12

$

4.04

100,000

0.12

2,579,000

1,079,000

F-15

Table of Contents


AMERITYRE CORPORATION

Notes to the Financial Statements

June 30, 2012 and 2011


As of June 30, 2012 and 2011, there was no unrecognized stock-based compensation related to stock options.

NOTE 5 - GOING CONCERN


Our financial statements are prepared using generally accepted accounting principles applicable to a going concern which contemplates the realization of assets and liquidation of liabilities in the normal course of business.  We have historically incurred significant losses, which have resulted in a total retained deficit of $58,062,103 at June 30, 2012, which raises substantial doubt about our ability to continue as a going concern.  The accompanying financial statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result from the outcome of this uncertainty.


Over the past several months, the Company has revised its overall business and financing strategy.  While management is still intent on focusing on the profitable product lines, there are a significant number of revenue growth opportunities that are being lost due to existing cash flow constraints.  Therefore, management hopes to adopt an aggressive business plan that involves the acquisition of production equipment to achieve higher production output and to maintain sufficient raw material inventory levels to capitalize on revenue growth opportunities.  This aggressive business strategy can only be implemented with additional financing.  Therefore, the Company has increased its efforts to obtain financing through means that heretofore may not have been previously considered such as preferred stock offerings and government backed loans.  If we are unable to obtain the necessary financing to execute an aggressive strategy, then the Company will have to revert to a slow-growth, cash sustainable plan.


To supplement our cash needs at the end of fiscal year 2012 and into fiscal 2013, we conducted a private placement of convertible preferred stock (the "Series A Shares). As of the filing date, the Company has received and accepted subscriptions for the purchase of 885,000 shares of its Series A Shares.   


In connection with the preparation of our financial statements for the year ended June 30, 2012, we have analyzed our cash needs for fiscal 2013. Based on this analysis, we have concluded that our available cash, including the cash raised in the private placement of convertible preferred stock, should be sufficient to meet our minimum cash requirements for fiscal 2013 for a slow-growth, cash sustainable plan. However we may need additional capital if our sales revenues do not meet our expectations.  Furthermore, we will need a significant capital investment if we are to implement our aggressive business strategy.


Our ability to continue as a going concern is dependent upon our ability to successfully accomplish the plan described above, and attain profitable operations.


The accompanying financial statements do not include any adjustments that might be necessary should we be unable to continue as a going concern.


NOTE 6 – NOTE RECEIVABLE


In June 2007, we issued 200,000 shares of common stock in connection with the exercise of 200,000 options at an exercise price of $4.00 per share for aggregate proceeds of $200,000 in cash and an additional two (2) notes in the amount of $300,000 each.  The notes were payable in equal annual installments over a 3 year period and bear interest at 8.5% per annum.

In December 2008, the original notes were replaced with a single note in the amount of $439,502.  The note was payable in four (4) equal installments and bear interest of 4.5% per annum, together with accrued interest, commencing on November 30, 2009.  A forbearance agreement, signed in December 2009, modified the November 30, 2009 payment to include the payment of unpaid interest plus monthly installments of $7,500 through October 2010 with a balance payment of $27,500 plus accrued interest due on November 1, 2010 which has been received.  During October 2010 and November 2010, we received 20,000 shares each month of our restricted common stock as part of the monthly installment related to our note receivable.  In November 2010, we also received 80,000 shares of our restricted common stock as final payment for the forbearance agreement dated December 2009.  The shares were returned to the company for cancellation and are included in the Company's authorized and unissued shares.   Payment of the remaining balance of $343,238 was renegotiated with interest-only monthly installment payments beginning January 1, 2011 and five annual principal payments of approximately $69,000 due beginning December 1, 2011.  In November 2011, the Board of Director's negotiated a settlement to retire the Note Receivable entered into in June 2007 for the purchase of its common stock.  Under the terms of the settlement agreement, the debtor paid the Company $100,000 and accrued interest of $1,287 in full settlement of the note receivable.  As a related-party transaction, the Note Receivable has been included in the equity section of the balance sheet since its inception.  The outstanding principal balance on the Note Receivable as of October 31, 2011 was $343,238.  The difference between the outstanding balance and the settlement amount was charged against additional paid-in capital during the quarter ending March 31, 2012.  Over the term of the Note, in addition to cash payments, the debtor has surrendered a large portion of the shares acquired in the original transaction.

F-16

Table of Contents


AMERITYRE CORPORATION

Notes to the Financial Statements

June 30, 2012 and 2011


NOTE 7 – CONVERTIBLE NOTES PAYABLE

In September 2010, we closed a private placement of secured convertible promissory notes (the "Notes").  We sold an aggregate of $755,800 in Notes.  The Notes had a one year term with simple interest of 6.0%.  The Notes are convertible at the holders' option to our common stock at a conversion rate of $0.35 per share.  The Notes are secured by all assets of the Company.  Principal and interest are due at maturity of the Notes if the Notes are not converted.  If the holder elects such conversion, for each two shares in the conversion, the holder shall also receive one warrant to purchase an additional share, exercisable at $0.60 per share for an exercise period of 2 years from the date of conversion.  No officers, directors or affiliates of the Company participated in the private placement.  The Notes were sold pursuant to subscription documents between the Company and each investor.  In connection with the private placement of secured convertible promissory notes, on September 15, 2010, the Company issued 142,856 shares of restricted common stock as finders' fees.  The aggregate value of the shares issued as finders' fees was $50,000, based on the closing price of $0.36 per share.  For the year ended June 30, 2012, $110,000 of the Notes were redeemed; $195,800 of the Notes converted into 559,429 shares of common stock; $150,000 of the Notes extended maturity until June 30, 2012; and $450,000 of the Notes extended maturity until September 30, 2012.  Interest due on the Notes as of June 30, 2012 was $9,018.


NOTE 8 – SUBSEQUENT EVENTS

On May 29, 2012, the Board of Directors approved a resolution designating 1,500,000 shares of preferred stock, $0.001 par value, as Series A Contingent Convertible Preferred Stock (the "Series A Shares").  On June 1, 2012, the Company filed a Certificate of Designation with the Nevada Secretary of State for Series A Contingent Convertible Preferred Stock.  The Certificate of Designation was approved by the Nevada Secretary of State on June 4, 2012.

The Series A Shares have no dividend rights and have voting rights only on any matters directly affecting the rights and privileges of the Series A Shares. The Series A Shares have liquidation preference amounting to a return of the initial par value per share only, with no further participation in any distributions to other shareholders. Any issued Series A Shares will automatically convert to the Company's common stock at a ratio of 4 shares of common stock for each share of the Series A Preferred shares after the later of six months from the date of issuance or the date on which the Corporation shall have available shares of common stock which are authorized, un-issued and not reserved for any other event or contingency, in an amount sufficient to convert all of the shares of Series A Shares issued and outstanding on the date of the proposed conversion.  As of June 30, 2012, the Company had received, but not yet accepted, subscription documents, and the related cash deposits, for the purchase of 260,000 shares of the Series A Shares. These subscriptions were subsequently accepted and the shares issued in July and August 2012.  As of the filing date of this Report, the Company has received and accepted subscriptions for the purchase of 885,000 shares of its Series A Shares for gross proceeds of $885,000.


On August 1, 2012, the Board of Directors authorized an aggregate of 750,000 shares of restricted common stock to its directors for additional services provided during the six months ended June 30, 2012. The total value of the shares issued was $150,000 based on the closing market price on the authorization date of $0.20 per share.  The value of the shares was accrued as stock-based compensation expense for the year ended June 30, 2012. The shares were issued in September 2012.

On September 26, 2012, the Company redeemed an additional $50,000 of the secured convertible promissory notes (the "Note").  Interest due on the Note of $1,000 was also paid at redemption.

F-17

Table of Contents