TXN 2009 10-K

Texas Instruments Inc (TXN) SEC Annual Report (10-K) for 2010

TXN 2011 10-K
TXN 2009 10-K TXN 2011 10-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C.  20549


FORM 10-K


(mark one)


x

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934


For the fiscal year ended December 31, 2010


OR


¨

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934


for the transition period from  to  


Commission File Number 1-3761


TEXAS INSTRUMENTS INCORPORATED

(Exact name of Registrant as specified in its charter)


Delaware

75-0289970

(State of Incorporation)

(I.R.S.  Employer Identification No.)

12500 TI Boulevard, P.O. Box 660199, Dallas, Texas

75266-0199

(Address of Principal Executive Offices)

(Zip Code)


Registrant's Telephone Number, Including Area Code: 972-995-3773


Securities registered pursuant to Section 12(b) of the Act:


Title of each class

Name of each exchange on which registered

Common Stock, par value $1.00

New York Stock Exchange


Securities registered pursuant to Section 12(g) of the Act: None


Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes S   No ¨


Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

Yes ¨   No S


Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes S No ¨


Insert by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes S No ¨


Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.   S


Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer,  a non-accelerated filer, or a smaller reporting company.  See the definitions of "large accelerated filer," "accelerated filer," and "smaller reporting company" in Rule 12b-2 of the Exchange Act.  (Check one):


Large accelerated filer S

Accelerated filer ¨

Non-accelerated filer ¨

Smaller reporting company ¨


Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes ¨   No S


The aggregate market value of voting stock held by non-affiliates of the Registrant was approximately $27,239,003,249 as of June 30, 2010.


1,172,051,474 (Number of shares of common stock outstanding as of January 31, 2011)


Parts I, II and IV hereof incorporate information by reference to the Registrant's 2010 annual report to stockholders.  Part III hereof incorporates information by reference to the Registrant's proxy statement for the 2011 annual meeting of stockholders.



PART I

ITEM 1.  Business.

Company Overview

At TI, we design and make semiconductors that we sell to electronics designers and manufacturers all over the world.  We began operations in 1930.  We are incorporated in Delaware, headquartered in Dallas, Texas, and have design, manufacturing or sales operations in more than 30 countries.  We have four segments: Analog, Embedded Processing, Wireless and Other.  We expect Analog and Embedded Processing to be our primary growth engines in the years ahead, and we therefore focus our resources on these segments.

We were the world's fourth largest semiconductor company in 2010 as measured by revenue, according to preliminary estimates from an external source.  Additionally, we sell calculators and related products.

Financial information with respect to our segments and our operations outside the United States is contained in the note to the financial statements captioned "Segment and geographic area data" in TI's 2010 annual report to stockholders.  It is incorporated herein by reference to such annual report.

Product Information

Semiconductors are electronic components that serve as the building blocks inside modern electronic systems and equipment.  Semiconductors come in two basic forms: individual transistors and integrated circuits (generally known as "chips") that combine multiple transistors on a single piece of material to form a complete electronic circuit. Our semiconductors are used to accomplish many different things, such as converting and amplifying signals, interfacing with other devices, managing and distributing power, processing data, canceling noise and improving signal resolution.  Our portfolio includes products that are integral to almost all electronic equipment.

We sell custom and standard semiconductor products.  Custom products are designed for a specific customer for a specific application, are sold only to that customer and are typically sold directly to the customer.  The life cycles of custom products are generally determined by end-equipment upgrade cycles and can be as short as 12 to 24 months.  Standard products are designed for use by many customers and/or many applications and are generally sold through both distribution and direct channels.  They include both proprietary and commodity products.  The life cycles of standard products are generally longer than for custom products.

Additional information regarding each segment's products follows.

Analog

Analog semiconductors change real-world signals – such as sound, temperature, pressure or images – by conditioning them, amplifying them and often converting them to a stream of digital data that can be processed by other semiconductors, such as digital signal processors (DSPs).  Analog semiconductors are also used to manage power distribution and consumption.  Sales to our Analog segment's more than 80,000 customers generated 43 percent of our revenue in 2010.  According to external sources, the worldwide market for analog semiconductors was about $42 billion in 2010.  Our Analog segment's revenue in 2010 was about $6 billion, or about 14 percent of this market, the leading position.  We believe that we are well positioned to increase our market share over time.

Our Analog product lines are:  high-volume analog & logic, high-performance analog and power management.

High-volume analog & logic products:  High-volume analog includes products for specific applications, including custom products.  The life cycles of our high-volume analog products are generally shorter than those of our high-performance analog products.  End markets for high-volume analog products include communications, automotive, computing and many consumer electronics products.  Logic and standard linear includes commodity products marketed to many different customers for many different applications.

High-performance analog products:  These include standard analog semiconductors, such as amplifiers, data converters and interface semiconductors (our portfolio includes nearly 16,000 products), that we market to many different customers who use them in manufacturing a wide range of products sold in many end markets, including the industrial, communications, computing and consumer electronics markets.  High-performance analog products generally have long life cycles, often more than 10 years.

2


Power management products:  These include both standard and custom semiconductors that help customers manage power in any type of electronic system.  We design and manufacture power management semiconductors for both portable devices (battery-powered devices, such as handheld consumer electronics, laptop computers and cordless power tools) and line-powered systems (products that require an external electrical source, such as computers, digital TVs, wireless base stations and high-voltage industrial equipment).

Embedded Processing

Our Embedded Processing products include our DSPs and microcontrollers.  DSPs perform mathematical computations almost instantaneously to process or improve digital data.  Microcontrollers are designed to control a set of specific tasks for electronic equipment.  Sales of Embedded Processing products generated 15 percent of our revenue in 2010.  According to external sources, the worldwide market for embedded processors was about $18 billion in 2010.  Our Embedded Processing segment's revenue in 2010 was about $2 billion, or about 11 percent of this fragmented market.   We believe we are well positioned to increase our market share over time.

An important characteristic of our Embedded Processing products is that our customers often invest their own research and development (R&D) to write software that operates on our products.  This investment tends to increase the length of our customer relationships because customers prefer to re-use software from one product generation to the next.  We make and sell standard, or catalog, Embedded Processing products used in many different applications and custom Embedded Processing products used in specific applications, such as communications infrastructure equipment and automotive.

Wireless

Growth in the wireless handset market is being driven by the demand for smartphones, tablet computers and other emerging portable devices.  Many of today's smartphones and tablets use an applications processor to run the device's software operating system and to enable the expanding functionality that has made smartphones the fastest growing wireless segment.  Smartphones and tablets also use other semiconductors to enable connectivity through means other than the cellular network (such as Bluetooth ® devices, WiFi networks, GPS location services and Near Field Communication (NFC)).

We design, make and sell products to satisfy each of these requirements.  Wireless products are typically sold in high volumes, and our Wireless portfolio includes both standard products and custom products.  Sales of Wireless products generated about $3 billion, or 21 percent of our revenue, in 2010, with a significant portion of those sales to a single customer.

Our Wireless investments are concentrated on our connectivity products and OMAP applications processors, areas we believe offer significant growth opportunities and which will enable us to take advantage of the increasing demand for more powerful and more functional mobile devices.  We no longer invest in development of baseband products (products that allow a cell phone to connect to the cellular network), an area we believe offers far less promising growth prospects.  Almost all of our baseband products are sold to a single customer.  We expect substantially all of our baseband revenue, which was $1.7 billion in 2010, to cease by the end of 2012.

Other

Our Other segment includes revenue from our smaller semiconductor product lines and from sales of our handheld graphing and scientific calculators.  It also includes royalties received for our patented technology that we license to other electronics companies and revenue from transitional supply agreements entered into in connection with acquisitions and divestitures.  The semiconductor products in our Other segment include DLP® products (primarily used in projectors to create high-definition images) and custom semiconductors known as application-specific integrated circuits (ASICs).  This segment generated about $3 billion, or 21 percent of our revenue, in 2010.

3


Applications for Our Products

The table below lists the major end markets that use our products and the approximate percentage of our product revenue that the market represents.  The chart also lists the most frequent applications and our products used within these key markets.

End Market

Applications

TI Products

Communications

(42% of product revenue)

Phones and infrastructure equipment

Mobile connectivity solutions (including wireless LAN, global positioning systems, Bluetooth ® , NFC)

Video conferencing

Analog, Embedded Processing, Wireless, Other

Computing

(22% of product revenue)

Printers

Hard disk drives

Monitors and projectors

Notebooks, netbooks, desktop computers and servers

Tablet computers

Analog, Embedded Processing, Wireless, Other

Industrial

(14% of product revenue)

Digital power controls:

Switch mode power supplies

Uninterruptible power supplies

Motor controls:

Heating/ventilation/air conditioning

Industrial control motor drives

Power tools

Printers/copiers

Security:

Biometrics (fingerprint identification and authentication)

Intelligent sensing (smoke and glass-breakage detection)Video analytics (surveillance)

Smart metering

Test and measurement

Point of service/portable data terminals

Analog, Embedded Processing, Other

Consumer Electronics

(11% of product revenue)

Digital cameras, gaming and audio/visual equipment

Portable and car audio

Home appliances

Personal navigation devices

eBook readers

Analog, Embedded Processing, Wireless, Other

Automotive

(8% of product revenue)

Body systems

Chassis systems

Driver information/telemetrics

Entertainment

Powertrain

Safety systems

Security systems

Analog, Embedded Processing, Other

Education

(3% of product revenue)

Handheld graphing and scientific calculators

Educational software

Other

Market Characteristics

Product cycle

The global semiconductor market is characterized by constant, though generally incremental, advances in product designs and manufacturing processes.  Semiconductor prices and manufacturing costs tend to decline over time as manufacturing processes and product life cycles mature.  Typically, new chips are produced in limited quantities at first and then ramp to high-volume production over time.

4


Market cycle

The "semiconductor cycle" is an important concept that refers to the ebb and flow of supply.  The semiconductor market historically has been characterized by periods of tight supply caused by strengthening demand and/or insufficient manufacturing capacity, followed by periods of surplus inventory caused by weakening demand and/or excess manufacturing capacity.  This cycle is affected by the significant time and money required to build and maintain semiconductor manufacturing facilities.

Seasonality

Our revenue and operating results are subject to some seasonal variation.  Our semiconductor sales generally are seasonally weaker in the first quarter than in other quarters, particularly for products sold into cell phones and other consumer electronics devices, which have stronger sales later in the year as manufacturers prepare for the major holiday selling seasons.  Calculator revenue is tied to the U.S. back-to-school season and is therefore at its highest in the second and third quarters.  Royalty revenue is not always uniform or predictable, in part due to the performance of our licensees and in part due to the timing of new license agreements or the expiration and renewal of existing agreements.

Competitive landscape

In each segment, we face significant global competition from numerous large and small companies, including both broad-based suppliers and niche suppliers.  Our competitors also include emerging companies, particularly in Asia, that sell products into the same markets in which we operate.  We believe that competitive performance in the semiconductor market generally depends on several factors, including the breadth of a company's product line, the strength and depth of the sales network, technological innovation, technical support, customer service, quality, reliability, price and scale.

The primary competitive factors for our Analog products include design proficiency, a diverse product portfolio to meet wide-ranging customer needs, manufacturing process technologies that provide differentiated levels of performance, applications and sales support, and manufacturing expertise.  Our primary Analog competitors include Analog Devices, Inc.; Fairchild Semiconductor Corporation; Freescale Semiconductor, Inc.; Infineon Technologies AG; Intersil Corporation; Linear Technology Corporation; Maxim Integrated Products, Inc.; National Semiconductor Corporation; NXP Semiconductors N.V.; Richtek Technology Corporation; and STMicroelectronics NV.

The primary competitive factors for our Embedded Processing products are the ability to design and cost-effectively manufacture products, system-level knowledge about targeted end markets, installed base of software, software expertise, applications and sales support, and a product's performance and power characteristics.  Primary competitors of our Embedded Processing segment include Atmel Corporation; Freescale Semiconductor, Inc.; Marvell Technology Group, Ltd.; Microchip Technology, Inc.; NXP Semiconductors N.V.; Renesas Electronics Corporation; and STMicroelectronics NV.

The primary competitive factors for our Wireless products are the ability to design and cost-effectively manufacture products, system-level knowledge about targeted end markets, software expertise, applications support and a product's performance and power characteristics.  Primary Wireless competitors include Broadcom Corp.; CSR plc; Intel Corporation; Marvell Technology Group, Ltd.; NVIDIA Corporation; QUALCOMM Incorporated; Renesas Electronics Corporation; Samsung LSI; and ST-Ericsson.

Manufacturing

Semiconductor manufacturing begins with a sequence of photo-lithographic and chemical processing steps that fabricate a number of semiconductor devices on a thin silicon wafer.  Each device on the wafer is tested and the wafer is cut into pieces called chips.  Each chip is assembled into a package that then is usually retested.  The entire process typically requires between 12 and 18 weeks and takes place in highly specialized facilities.

We own and operate semiconductor manufacturing facilities in North America, Asia and Europe.  These include both high-volume wafer fabrication and assembly/test facilities.  Our facilities require substantial investment to construct and are largely fixed-cost assets once in operation.  Because we own much of our manufacturing capacity, a significant portion of our operating cost is fixed.  In general, these fixed costs do not decline with reductions in customer demand or utilization of capacity, potentially hurting our profit margins.  Conversely, as product demand rises and factory utilization increases, the fixed costs are spread over increased output, potentially benefiting our profit margins.

5


The cost and lifespan of the equipment and processes we use to manufacture semiconductors vary by product.  Our Analog products and most of our Embedded Processing products can be manufactured using older, less expensive equipment than is needed for manufacturing advanced logic products, such as our Wireless products.  Advanced logic wafer manufacturing continually requires new and expensive processes and equipment.  In contrast, the processes and equipment required for manufacturing our Analog products and most of our Embedded Processing products do not have this requirement.

In 2010, we continued to expand our analog manufacturing capacity through the acquisitions of wafer fabrication facilities in Japan and China, and the purchase and installation of analog wafer manufacturing equipment.  These manufacturing assets were purchased at very cost-effective pricing such that the impact to depreciation resulting from these fixed cost assets will be minimal.  In total, the equipment and factories purchased at discounted prices since late 2009 will support more than $5 billion of total additional revenue once fully operational.

To supplement our internal wafer fabrication capacity and maximize our responsiveness to customer demand and return on capital, our wafer manufacturing strategy utilizes the capacity of outside suppliers, commonly known as foundries.  We source about 25 percent of our wafers from external foundries, with the vast majority of this outsourcing being for advanced logic wafers.  In 2010, external foundries provided 60 percent of the fabricated wafers for our advanced logic manufacturing needs.  We expect the proportion of our advanced logic wafers provided by foundries will increase over time.  We expect to maintain sufficient internal wafer fabrication capacity to meet the vast majority of our analog production needs.

In addition to using foundries to supplement our wafer fabrication capacity, we selectively use subcontractors to supplement our assembly/test capacity.  We generally use subcontractors for assembly/test of products that would be less cost-efficient to complete in-house (e.g., relatively low-volume products that are unlikely to keep internal equipment fully utilized), or when demand temporarily exceeds our internal capacity.  We believe we often have a cost advantage from maintaining internal assembly/test capacity.

Our internal/external manufacturing strategy reduces the level of our required capital expenditures, and thereby reduces our subsequent levels of depreciation below what it would be if we sourced all manufacturing internally.  Consequently, we experience less fluctuation in our profit margins due to changing product demand, and lower cash requirements for expanding and updating our manufacturing capabilities.

Inventory


Our inventory practices differ by product, but we generally maintain inventory levels that are consistent with our expectations of customer demand.  Because of the longer product life cycles of standard products and their inherently lower risk of obsolescence, we generally carry more of those products than custom products.  Additionally, we sometimes maintain standard-product inventory in unfinished wafer form, as well as higher finished goods inventory of low volume products, allowing greater flexibility in periods of high demand.  We also have consignment inventory programs in place for our largest customers and some distributors.

Design Centers

Our design centers provide design, engineering and product application support as well as after-sales customer service.  The design centers are strategically located around the world to take advantage of key technical and engineering talent and proximity to key customers.

Customers

Our products are sold to original equipment manufacturers (OEMs), original design manufacturers (ODMs), contract manufacturers and distributors.  (An OEM designs and sells products under its own brand that it manufactures in-house or has manufactured by others.  An ODM designs and manufactures products for other companies, which then sell those products under their own brand.)  Our largest single customer in 2010 was an OEM, the Nokia group of companies.  Sales to Nokia were about 19 percent of our revenue in 2010; about two-thirds of the Nokia-related revenue was from baseband products.

6


Sales and Distribution

We market and sell our semiconductor products through a direct sales force, distributors and authorized third-party sales representatives.  We have sales or marketing offices in over 30 countries worldwide and have expanded our sales networks in the emerging markets of China, India and Eastern Europe over the last few years.  Distributors located around the world account for about 37 percent of our revenue.  Our distributors maintain an inventory of our products and sell directly to a wide range of customers.  They also sell products from our competitors.  Our distribution network holds a mix of distributor-owned and TI-consigned inventory.  Over time, we expect this mix will shift more toward consignment.  We sell our calculator products primarily through retailers and instructional dealers.

Acquisitions, Divestitures and Investments

From time to time we consider acquisitions and divestitures that may strengthen or better focus our business portfolio.  We also make investments directly or indirectly in private companies.  Investments are focused primarily on next-generation technologies and markets strategic to us.

Backlog

We define backlog as of a particular date as firm purchase orders with a customer-requested delivery date within a specified length of time.  As customer requirements and industry conditions change, orders may be, under certain circumstances, subject to cancellation or modification of terms such as pricing, quantity or delivery date.  Customer order placement practices continually evolve based on customers' individual business needs and capabilities, as well as industry supply and capacity considerations.  Accordingly, our backlog at any particular date may not be indicative of revenue for any future period.  Our backlog of orders was $1.75 billion at December 31, 2010, and $1.79 billion at December 31, 2009.

Raw Materials

We purchase materials, parts and supplies from a number of suppliers.  In some cases we purchase such items from sole source suppliers.  The materials, parts and supplies essential to our business are generally available at present, and we believe that such materials, parts and supplies will be available in the foreseeable future.

Intellectual Property

We own many patents, and have many patent applications pending, in the United States and other countries in fields relating to our business.  We have developed a strong, broad-based patent portfolio and continually add patents to that portfolio.  We also have agreements with numerous companies involving license rights and anticipate that other license agreements may be negotiated in the future.  In general, our license agreements have multi-year terms and may be renewed after renegotiation.

Our semiconductor patent portfolio is an ongoing contributor to our revenue.  We do not consider our business materially dependent upon any one patent or patent license, although taken as a whole, our rights and the products made and sold under patents and patent licenses are important to our business.

We often participate in industry initiatives to set technical standards.  Our competitors may also participate in the same initiatives.  Participation in these initiatives may require us to license our patents to other companies.

We own trademarks that are used in the conduct of our business.  These trademarks are valuable assets, the most important of which are "Texas Instruments" and our corporate monogram.  Other valuable trademarks include OMAP TM and DLP ® .

Research and Development

Our primary area of R&D investment is Analog and Embedded Processing products.  We conduct most of our R&D internally.  However, we also closely engage with a wide range of third parties, including software suppliers, universities and select external industry consortia, and we collaborate with our foundry suppliers on semiconductor manufacturing technology.

From time to time we may terminate R&D projects before completion or decide not to manufacture and sell a developed product.  We do not expect that all of our R&D projects will result in products that are ultimately released for sale, or that our projects will contribute significant revenue until at least a few years following completion.

7


Our R&D expense was $1.57 billion in 2010, compared with $1.48 billion in 2009 and $1.94 billion in 2008.  The lower levels of R&D expense in recent years are largely the result of our decision to discontinue R&D for Wireless baseband products.

Executive Officers of the Registrant

The following is an alphabetical list of the names and ages of the executive officers of the company and the positions or offices with the company presently held by each person named:

Name

Age

Position

Stephen A. Anderson

49

Senior Vice President

Brian T. Crutcher

38

Senior Vice President

R. Gregory Delagi

48

Senior Vice President

David K. Heacock

50

Senior Vice President

Joseph F. Hubach

53

Senior Vice President, Secretary and General Counsel

Sami Kiriaki

50

Senior Vice President

Melendy E. Lovett

52

Senior Vice President (President, Education Technology)

Gregg A. Lowe

48

Senior Vice President

Kevin P. March

53

Senior Vice President and Chief Financial Officer

Robert K. Novak

45

Senior Vice President

Kevin J. Ritchie

54

Senior Vice President

John J. Szczsponik, Jr.

50

Senior Vice President

Richard K. Templeton

52

Director; Chairman of the Board; President and Chief Executive Officer

Teresa L. West

50

Senior Vice President

Darla H. Whitaker

45

Senior Vice President

The term of office of the above-listed officers is from the date of their election until their successor shall have been elected and qualified.  All executive officers of the company have been employees of the company for more than five years.  Mses. Lovett and West and Messrs. Hubach, Lowe, March, Ritchie and Templeton have served as executive officers of the company for more than five years.  Ms. Whitaker became an executive officer of the company in 2006.  Messrs. Delagi and Heacock became executive officers of the company in 2007.  Messrs. Anderson and Novak became executive officers of the company in 2008.  Mr. Szczsponik became an executive officer of the company in 2009.  Messrs. Crutcher and Kiriaki became executive officers of the company in 2010.

Employees

At December 31, 2010, we had 28,412 employees.

Available Information

Our Internet address is www.ti.com.  Information on our web site is not a part of this report.  We make available, free of charge, through our investor relations web site our reports on Forms 10-K, 10-Q and 8-K, and amendments to those reports, as soon as reasonably practicable after they are filed with the SEC.  Also available through the TI investor relations web site are reports filed by our directors and executive officers on Forms 3, 4 and 5, and amendments to those reports.

Available on our web site at www.ti.com/corporategovernance are: (i) our Corporate Governance Guidelines; (ii) charters for the Audit, Compensation, and Governance and Stockholder Relations Committees of our board of directors; (iii) our Code of Business Conduct; and (iv) our Code of Ethics for TI Chief Executive Officer and Senior Financial Officers.  Stockholders may request copies of these documents free of charge by writing to Texas Instruments Incorporated, P.O. Box 660199, MS 8657, Dallas, Texas, 75266-0199, Attention: Investor Relations.

8


ITEM 1A.   Risk Factors.

You should read the following Risk Factors in conjunction with the factors discussed elsewhere in this and other of our filings with the Securities and Exchange Commission (SEC) and in materials incorporated by reference in these filings.  These Risk Factors are intended to highlight certain factors that may affect our financial condition and results of operations and are not meant to be an exhaustive discussion of risks that apply to companies like TI with broad international operations.  Like other companies, we are susceptible to macroeconomic downturns in the United States or abroad that may affect the general economic climate and our performance and the performance of our customers.  Similarly, the price of our securities is subject to volatility due to fluctuations in general market conditions, actual financial results that do not meet our and/or the investment community's expectations, changes in our and/or the investment community's expectations for our future results and other factors, many of which are beyond our control.

Cyclicality in the Semiconductor Market May Affect Our Performance.

Semiconductor products are the principal source of our revenue.  The semiconductor market historically has been cyclical and subject to significant and often rapid increases and decreases in product demand.  These changes could have adverse effects on our results of operations, and on the market price of our securities.  The results of our operations may be adversely affected in the future if demand for our semiconductors decreases or if this market or key end-equipment markets grow at a significantly slower pace than management expects.

Our Margins May Vary over Time.

Our profit margins may be adversely affected in the future by a number of factors, including decreases in our shipment volume, reductions in, or obsolescence of our inventory and shifts in our product mix.  In addition, the highly competitive market environment in which we operate might adversely affect pricing for our products.  Because we own much of our manufacturing capacity, a significant portion of our operating costs is fixed.  In general, these fixed costs do not decline with reductions in customer demand or utilization of manufacturing capacity, and can adversely affect profit margins as a result.

The Technology Industry Is Characterized by Rapid Technological Change That Requires Us to Develop New Technologies and Products.

Our results of operations depend in part upon our ability to successfully develop, manufacture and market innovative products in a rapidly changing technological environment.  We require significant capital to develop new technologies and products to meet changing customer demands that, in turn, may result in shortened product life cycles.  Moreover, expenditures for technology and product development are generally made before the commercial viability for such developments can be assured.  As a result, there can be no assurance that we will successfully develop and market these new products.  There also is no assurance that the products we do develop and market will be well received by customers, nor that we will realize a return on the capital expended to develop such products.

We Face Substantial Competition That Requires Us to Respond Rapidly to Product Development and Pricing Pressures.

We face intense technological and pricing competition in the markets in which we operate.  We expect this competition will continue to increase from large competitors and from smaller competitors serving niche markets, and also from emerging companies, particularly in Asia, that sell products into the same markets in which we operate.  Certain of our competitors possess sufficient financial, technical and management resources to develop and market products that may compete favorably against our products.  The price and product development pressures that result from competition may lead to reduced profit margins and lost business opportunities in the event that we are unable to match the price declines or cost efficiencies, or meet the technological, product, support, software or manufacturing advancements of our competitors.

Our Performance Depends in Part on Our Ability to Enforce Our Intellectual Property Rights and to Develop and License New Intellectual Property.

Access to worldwide markets depends in part on the continued strength of our intellectual property portfolio.  There can be no assurance that, as our business expands into new areas, we will be able to independently develop the technology, software or know-how necessary to conduct our business or that we can do so without infringing the intellectual property rights of others.  To the extent that we have to rely on licensed technology from others, there can be no assurance that we will be able to obtain licenses at all or on terms we consider reasonable.  The lack of a necessary license could expose us to claims for damages and/or injunction from third parties, as well as claims for indemnification by our customers in instances where we have a contractual or other legal obligation to indemnify them against damages resulting from infringement claims.

9


With regard to our own intellectual property, we actively enforce and protect our rights.  However, there can be no assurance that our efforts will be adequate to prevent the misappropriation or improper use of our protected technology.

We benefit from royalty revenue generated from various patent license agreements.  The amount of such revenue depends in part on negotiations with new licensees, and with existing licensees in connection with renewals of their licenses.  There is no guarantee that such negotiations will be successful.  Future royalty revenue also depends on the strength and enforceability of our patent portfolio and our enforcement efforts, and on the sales and financial stability of our licensees.  Additionally, consolidation of our licensees may negatively affect our royalty revenue.  Royalty revenue from licensees is not always uniform or predictable, in part due to the performance of our licensees and in part due to the timing of new license agreements or the expiration and renewal of existing agreements.

A Decline in Demand in Certain End-User Markets Could Have a Material Adverse Effect on the Demand for Our Products and Results of Operations.

Our customer base includes companies in a wide range of end-user markets, but we generate a significant amount of revenue from sales to customers in the communications- and computer-related industries and from sales to industrial customers.  Within these end-user markets, a large portion of our revenue is generated from sales to customers in the cell phone, personal computer and communications infrastructure markets.  Decline in one or several of these end-user markets could have a material adverse effect on the demand for our products and our results of operations and financial condition.

Our Global Manufacturing, Design and Sales Activities Subject Us to Risks Associated with Legal, Political, Economic or Other Changes.

We have facilities in more than 30 countries worldwide, and about 90 percent of our revenue comes from sales to locations outside the United States.  Operating internationally exposes us to changes in export controls and other laws or policies, as well as political and economic conditions, security risks, health conditions and possible disruptions in transportation networks of the various countries in which we operate.  Any of these could result in an adverse effect on our business operations and our financial results.  Additionally, in periods when the U.S. dollar significantly fluctuates in relation to the non-U.S. currencies in which we transact business, the remeasurement of non-U.S. dollar transactions can have an adverse effect on our results of operations and financial condition.

Our Results of Operations Could be Affected by Natural Events in the Locations in Which We or Our Customers or Suppliers Operate.

We have manufacturing and other operations in locations subject to natural occurrences such as severe weather and geological events that could disrupt operations.  In addition, our suppliers and customers also have operations in such locations.  A natural disaster that results in a prolonged disruption to our operations, or the operations of our customers or suppliers, may adversely affect our results and financial condition.

The Loss of or Significant Curtailment of Purchases by Any of Our Largest Customers Could Adversely Affect Our Results of Operations.

While we generate revenue from thousands of customers worldwide, the loss of or significant curtailment of purchases by one or more of our top customers (including curtailments due to a change in the design or manufacturing sourcing policies or practices of these customers, or the timing of customer or distributor inventory adjustments) may adversely affect our results of operations and financial condition.

Incorrect Forecasts of Customer Demand Could Adversely Affect Our Results of Operations.

Our ability to match inventory and production with the product mix needed to fill orders may affect our ability to meet a quarter's revenue forecast.  In addition, when responding to customers' requests for shorter shipment lead times, we manufacture products based on forecasts of customers' demands.  These forecasts are based on multiple assumptions.  If we inaccurately forecast customer demand, we may hold inadequate, excess or obsolete inventory that would reduce our profit margins and adversely affect our results of operations and financial condition.

10


Our Performance Depends on the Availability and Cost of Raw Materials, Utilities, Critical Manufacturing Equipment, Manufacturing Processes and Third-Party Manufacturing Services.

Our manufacturing processes and critical manufacturing equipment require that certain key raw materials and utilities be available.  Limited or delayed access to and high costs of these items could adversely affect our results of operations.  Additionally, the inability to timely implement new manufacturing technologies or install manufacturing equipment could adversely affect our results of operations.  We subcontract a portion of our wafer fabrication and assembly and testing of our integrated circuits.  We also depend on third parties to provide advanced logic manufacturing process technology development.  A limited number of third parties perform these functions, and we do not have long-term contracts with all of them.  Reliance on these third parties involves risks, including possible shortages of capacity in periods of high demand, the third parties' inability to develop and deliver advanced logic manufacturing process technology in a timely, cost effective and appropriate manner and the possibility of third parties imposing increased costs on us.

Our Results of Operations Could be Affected by Changes in Tax-Related Matters.

We have facilities in more than 30 countries worldwide and as a result are subject to taxation and audit by a number of taxing authorities.  Tax rates vary among the jurisdictions in which we operate.  Our results of operations could be affected by market opportunities or decisions we make that cause us to increase or decrease operations in one or more countries, or by changes in applicable tax rates or audits by the taxing authorities in countries in which we operate.

In addition, we are subject to laws and regulations in various jurisdictions that determine how much profit has been earned and when it is subject to taxation in that jurisdiction.  Changes in these laws and regulations could affect the locations where we are deemed to earn income, which could in turn affect our results of operations.  We have deferred tax assets on our balance sheet.  Changes in applicable tax laws and regulations or in our business performance could affect our ability to realize those deferred tax assets, which could also affect our results of operations.  Each quarter we forecast our tax liability based on our forecast of our performance for the year.  If that performance forecast changes, our forecasted tax liability will change.

Our Operations Could be Affected by Changes in Environmental, Safety and Health Laws and Regulations


We are subject to environmental, safety and health laws and regulations in the jurisdictions in which we operate our business, particularly those in which we manufacture our products.  If we fail to comply with these laws and regulations, we could be subject to fines, penalties or other legal liability.  Furthermore, should these laws and regulations be amended or expanded, or new ones enacted, we could incur materially greater compliance costs or restrictions on our ability to manufacture our products and operate our business, particularly if such laws and regulations: require the use of abatement equipment beyond what we currently employ; require the addition or elimination of a raw material or process to or from our current manufacturing processes; or impose costs, fees or reporting requirements on the direct or indirect use of energy, or of materials or gases used or emitted into the environment, in connection with the manufacture of our products.  There can be no assurance that in all instances a substitute for a prohibited raw material or process would be available, or be available at reasonable cost.

Our Results of Operations Could be Affected by Changes in the Financial Markets.

We maintain bank accounts, a multi-year revolving credit agreement, and a portfolio of investments to support the financing needs of the company.  Our ability to fund our daily operations, invest in our business, and make strategic acquisitions requires continuous access to our bank and investment accounts, as well as access to our bank credit lines that support commercial paper borrowings and provide additional liquidity through short-term bank loans.  If we are unable to access these accounts and credit lines (for example, due to instability in the financial markets), our results of operations and financial condition could be adversely affected.  Similarly, such circumstances could also restrict our ability to access the capital markets or redeem our investments.  If our customers or suppliers are unable to access credit markets and other sources of needed liquidity, we may receive fewer customer orders or be unable to obtain needed supplies, collect accounts receivable or access needed technology.

Material Impairments of Our Goodwill Could Adversely Affect Our Results of Operations


Charges associated with impairments of our goodwill could adversely affect our financial condition and results of operations.  Goodwill is reviewed for impairment annually or more frequently if certain impairment indicators arise or upon the disposition of a significant portion of a reporting unit.  The review compares the fair value for each reporting unit to its associated book value including goodwill.  A decrease in the fair value associated with a reporting unit resulting from, among other things, unfavorable changes in the estimated future discounted cash flow of the reporting unit, may require us to recognize impairments of goodwill.

11


Our Results of Operations Could be Affected by Warranty Claims, Product Recalls or Product Liability.

We could be subject to warranty or product liability claims or claims based on epidemic or delivery failures that could lead to significant expenses as we defend such claims or pay damage awards.  The risk of a significant claim is generally greater for products used in health and safety applications.  In the event of a warranty claim, we may also incur costs if we decide to compensate the affected customer or end consumer.  We maintain product liability insurance, but there is no guarantee that such insurance will be available or adequate to protect against all such claims.  In addition, it is possible for one of our customers to recall a product containing a TI part.  In such instances, we may incur costs and expenses relating to the recall.  Costs or payments we may make in connection with warranty, epidemic failure and delivery claims or product recalls may adversely affect our results of operations and financial condition.

Our Continued Success Depends in Part on Our Ability to Retain and Recruit a Sufficient Number of Qualified Employees in a Competitive Environment.

Our continued success depends in part on the retention and recruitment of skilled personnel, including technical, marketing, management and staff personnel.  There can be no assurance that we will be able to successfully retain and recruit the key personnel that we require.

ITEM 1B.   Unresolved Staff Comments.

Not applicable.

ITEM 2.      Properties.

Our principal executive offices are located at 12500 TI Boulevard, Dallas, Texas.  The following table indicates the general location of our principal manufacturing and design operations and the reportable segments that make major use of them.  Except as otherwise indicated, we own these facilities.

Analog

Embedded Processing

Wireless

Dallas, Texas

X

X

X

Sherman, Texas (2)

X

Houston, Texas

X

X

Tucson, Arizona (2)

X

Aguascalientes, Mexico (1)

X

Aizu, Japan

X

X

Miho, Japan

X

X

X

Hiji, Japan (2)

X

X

X

Tokyo, Japan (1)

X

X

X

Chengdu, China (2)

X

Shanghai, China (1)

X

X

X

Bangalore, India (2)

X

X

X

Kuala Lumpur, Malaysia (2)

X

X

Baguio, Philippines (2)

X

X

X

Pampanga (Clark), Philippines (2)

X

X

X

Taipei, Taiwan (2)

X

X

X

Freising, Germany

X

X

X

Nice, France (2)

X

X


________

(1)

Leased.

(2)

Portions of the facilities are leased and owned.


12


Our facilities in the United States contained approximately 14.0 million square feet at December 31, 2010, of which approximately 1.7 million square feet were leased.  Our facilities outside the United States contained approximately 9.6 million square feet at December 31, 2010, of which approximately 1.4 million square feet were leased.


At the end of 2010, we occupied substantially all of the space in our facilities.


Leases covering our currently occupied leased facilities expire at varying dates generally within the next 10 years.  We believe our current properties are suitable and adequate for both their intended purpose and our current and foreseeable future needs.


ITEM 3.      Legal Proceedings.


We are involved in various inquiries and proceedings regarding laws and regulations related to the protection of the environment.  These matters involve various parties, including government agencies and, in certain cases, other potentially responsible parties.  Although the factual situations and the progress of each of these matters differ, we believe that the amount of our liability, if any, will not have a material adverse effect upon our financial condition, results of operations or liquidity.


The Internal Revenue Code requires that companies disclose in their Form 10-K whether they have been required to pay penalties to the Internal Revenue Service for certain transactions that have been identified by the IRS as abusive or that have a significant tax avoidance purpose.  We have not been required to pay any such penalties.


ITEM 4.      (Removed and Reserved).



PART II


ITEM 5.

Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.


The information contained under the caption "Common stock prices and dividends" in our 2010 annual report to stockholders, and the information concerning the number of stockholders of record at December 31, 2010, contained under the caption "Summary of selected financial data" in such annual report, are incorporated herein by reference to such annual report.


The following table shows our repurchases of our common stock in the fourth quarter of 2010:


13


ISSUER PURCHASES OF EQUITY SECURITIES

Period

Total

Number of

Shares

Purchased

Average

Price Paid

per Share

Total Number

of Shares

Purchased as

Part of

Publicly

Announced

Plans or

Programs

Approximate Dollar Value of Shares that

May Yet Be

Purchased

Under the

Plans or

Programs (1)

October 1 through October 31, 2010

2,041,800 $ 29.38 2,041,800 $ 8.19 billion

November 1 through November 30, 2010

17,421,200 $ 31.00 17,421,200 $ 7.64 billion

December 1 through December 31, 2010

- - - $ 7.64 billion

Total

19,463,000 $ 30.83 19,463,000 (2) $ 7.64 billion (3)

_______

(1)

All purchases during the quarter were made under the authorization from our board of directors to purchase up to $5 billion of additional shares of TI common stock announced on September 21, 2007.


(2)

All purchases during the quarter were open-market purchases.

(3)

As of December 31, 2010, this amount consisted of the remaining portion of the $5 billion authorization announced on September 21, 2007, and the $7.5 billion authorization announced on September 16, 2010.  No expiration date was specified for these authorizations.


ITEM 6.      Selected Financial Data.

The information contained under the caption "Summary of selected financial data" for the years 2006 through 2010 in our 2010 annual report to stockholders, is incorporated herein by reference to such annual report.

ITEM 7.      Management's Discussion and Analysis of Financial Condition and Results of Operations.

The information contained under the caption "Management's discussion and analysis of financial condition and results of operations" in our 2010 annual report to stockholders is incorporated herein by reference to such annual report.

ITEM 7A.      Quantitative and Qualitative Disclosures about Market Risk.

The information contained under the caption "Quantitative and qualitative disclosures about market risk" in our 2010 annual report to stockholders is incorporated herein by reference to such annual report.

ITEM 8.      Financial Statements and Supplementary Data.

The consolidated financial statements of the company at December 31, 2010 and 2009, and for each of the three years in the period ended December 31, 2010, and the report thereon of the independent registered public accounting firm, on pages 2 through 31 of our 2010 annual report to stockholders, are incorporated herein by reference to such annual report.

The information contained under the caption "Quarterly financial data" in our 2010 annual report to stockholders is also incorporated herein by reference to such annual report.

ITEM 9.      Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.

Not applicable.

14


ITEM 9A.      Controls and Procedures.

Disclosure Controls and Procedures

An evaluation as of the end of the period covered by this report was carried out under the supervision and with the participation of TI's management, including its Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of TI's disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934).  Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that those disclosure controls and procedures were effective.

Internal Control over Financial Reporting

Management's assessment of our internal control over financial reporting is contained under the caption "Report by management on internal control over financial reporting" in our 2010 annual report to stockholders and is incorporated herein by reference to such annual report.

The information contained under the caption "Report of independent registered public accounting firm on internal control over financial reporting" in our 2010 annual report to stockholders is incorporated herein by reference to such annual report.

ITEM 9B.      Other Information.

Not applicable.

PART III

ITEM 10.      Directors, Executive Officers and Corporate Governance.

The information with respect to directors' names, ages, positions, term of office and periods of service, which is contained under the caption "Election of directors" in our proxy statement for the 2011 annual meeting of stockholders, is incorporated herein by reference to such proxy statement.

The information with respect to directors' business experience, which is contained under the caption "Board diversity and nominee qualifications" in our proxy statement for the 2011 annual meeting of stockholders, is incorporated herein by reference to such proxy statement.

The information with respect to Section 16(a) beneficial ownership reporting compliance contained under the caption of the same name in our proxy statement for the 2011 annual meeting of stockholders is incorporated herein by reference to such proxy statement.

A list of our executive officers and their biographical information appears in Part I, Item 1 of this report.

Code of Ethics

We have adopted the Code of Ethics for TI Chief Executive Officer and Senior Financial Officers.  A copy of the Code can be found on our web site at www.ti.com/corporategovernance.  We intend to satisfy the disclosure requirements of the SEC regarding amendments to, or waivers from, the Code by posting such information on the same web site.

Audit Committee

The information contained under the caption "Committees of the board" with respect to the audit committee and the audit committee financial expert in our proxy statement for the 2011 annual meeting of stockholders is incorporated herein by reference to such proxy statement.

ITEM 11.      Executive Compensation.

The information contained under the captions "Director compensation" and "Executive compensation" in our proxy statement for the 2011 annual meeting of stockholders is incorporated herein by reference to such proxy statement.

The information contained under the caption "Compensation committee interlocks and insider participation" in our proxy statement for the 2011 annual meeting of stockholders is incorporated herein by reference to such proxy statement.

15


ITEM 12.      Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

Equity Compensation Plan Information

The following table sets forth information about the company's equity compensation plans as of December 31, 2010:

Plan Category

Number of Securities

to be Issued Upon

Exercise of

Outstanding Options,

Warrants and Rights

Weighted-Average

Exercise Price of

Outstanding Options,

Warrants and Rights

Number of Securities

Remaining Available

for Future

Issuance

under Equity

Compensation Plans (excluding securities reflected in column (a))

(a)

(b)

(c)

Equity compensation plans approved by security holders

97,792,952 (1) $ 29.03 (2) 109,937,529 (3)

Equity compensation plans not approved by security holders

71,516,812 (4) $ 25.86 (2) 0

Total

169,309,764 (5) $ 27.70 109,937,529

(1)

Includes shares of TI common stock to be issued under the Texas Instruments 2009 Long-Term Incentive Plan and predecessor plans, the Texas Instruments 2009 Director Compensation Plan and the TI Employees 2005 Stock Purchase Plan.

Also includes 4,279 shares of TI common stock to be issued upon exercise of outstanding options originally granted under the Radia Communications, Inc. 2000 Stock Option/Stock Issuance Plan, a plan approved by the stockholders of Radia Communications, Inc. The options were assumed by the company in connection with the acquisition of Radia.

(2)

Restricted stock units and stock units credited to directors' deferred compensation accounts are settled in shares of TI common stock on a one-for-one basis. Accordingly, such units have been excluded for purposes of computing the weighted-average exercise price.

(3)

Shares of TI common stock available for issuance under the Texas Instruments 2009 Long-Term Incentive Plan, the Texas Instruments 2009 Director Compensation Plan and the TI Employees 2005 Stock Purchase Plan.

(4)

Includes shares to be issued under the Texas Instruments 2003 Long-Term Incentive Plan.  This plan was replaced by the Texas Instruments 2009 Long-Term Incentive Plan, which was approved by stockholders, and no further grants may be made under it.

Also includes shares to be issued under the Texas Instruments Directors Deferred Compensation Plan, the Texas Instruments Restricted Stock Unit Plan for Directors and the Texas Instruments Stock Option Plan for Non-Employee Directors. These plans were replaced by the Texas Instruments 2003 Director Compensation Plan (which was replaced by the stockholder-approved 2009 Director Compensation Plan), and no further grants may be made under them.

(5)

Includes 150,135,013 shares for issuance upon exercise of outstanding grants of options, 18,567,365 shares for issuance upon vesting of outstanding grants of restricted stock units, 487,871 shares for issuance under the TI Employees 2005 Stock Purchase Plan and 119,515 shares for issuance in settlement of directors' deferred compensation accounts.

Security Ownership of Certain Beneficial Owners and Management

The information that is contained under the captions "Security ownership of certain beneficial owners" and "Security ownership of directors and management" in our proxy statement for the 2011 annual meeting of stockholders is incorporated herein by reference to such proxy statement.

16


ITEM 13.      Certain Relationships and Related Transactions, and Director Independence.

The information contained under the caption "Related person transactions" in our proxy statement for the 2011 annual meeting of stockholders is incorporated herein by reference to such proxy statement.

The information contained under the caption "Director independence" in our proxy statement for the 2011 annual meeting of stockholders is incorporated herein by reference to such proxy statement.

ITEM 14.      Principal Accountant Fees and Services.

The information with respect to principal accountant fees and services contained under the caption "Proposal to ratify appointment of independent registered public accounting firm" in our proxy statement for the 2011 annual meeting of stockholders is incorporated herein by reference to such proxy statement.

PART IV

ITEM 15.      Exhibits and Financial Statement Schedules.

(a) 1 and 2.  Financial Statements and Financial Statement Schedules:

The financial statements are listed in the index on page 25 hereof.

3.  Exhibits:

Designation of

Exhibit in

this Report

Description of Exhibit

3(a)

Restated Certificate of Incorporation of the Registrant (incorporated by reference to Exhibit 3(a) to the Registrant's Annual Report on Form 10-K for the year 1993).

3(b)

Certificate of Amendment to Restated Certificate of Incorporation of the Registrant (incorporated by reference to Exhibit 3(b) to the Registrant's Annual Report on Form 10-K for the year 1993).

3(c)

Certificate of Amendment to Restated Certificate of Incorporation of the Registrant (incorporated by reference to Exhibit 3(c) to the Registrant's Annual Report on Form 10-K for the year 1993).

3(d)

Certificate of Amendment to Restated Certificate of Incorporation of the Registrant (incorporated by reference to Exhibit 3 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended June 30, 1996).

3(e)

Certificate of Ownership merging Texas Instruments Automation Controls, Inc. into the Registrant (incorporated by reference to Exhibit 3(e) to the Registrant's Annual Report on Form 10-K for the year 1993).

3(f)

Certificate of Elimination of Designations of Preferred Stock of the Registrant (incorporated by reference to Exhibit 3(f) to the Registrant's Annual Report on Form 10-K for the year 1993).

3(g)

Certificate of Ownership and Merger merging Tiburon Systems, Inc. into the Registrant (incorporated by reference to Exhibit 4(g) to the Registrant's Registration Statement No.  333-41919 on Form S-8).

3(h)

Certificate of Ownership and Merger merging Tartan, Inc. into the Registrant (incorporated by reference to Exhibit 4(h) to the Registrant's Registration Statement No.  333-41919 on Form S-8).


17


Designation of

Exhibit in

this Report

Description of Exhibit

3(i)

Certificate of Designation relating to the Registrant's Participating Cumulative Preferred Stock (incorporated by reference to Exhibit 4(a) to the Registrant's Quarterly Report on Form 10-Q for the quarter ended September 30, 1998).

3(j)

Certificate of Elimination of Designation of Preferred Stock of the Registrant (incorporated by reference to Exhibit 3(j) to the Registrant's Annual Report on Form 10-K for the year 1998).

3(k)

Certificate of Ownership and Merger merging Intersect Technologies, Inc. with and into the Registrant (incorporated by reference to Exhibit 3(k) to the Registrant's Annual Report on Form 10-K for the year 1999).

3(l)

Certificate of Ownership and Merger merging Soft Warehouse, Inc. with and into the Registrant (incorporated by reference to Exhibit 3(l) to the Registrant's Annual Report on Form 10-K for the year 1999).

3(m)

Certificate of Ownership and Merger merging Silicon Systems, Inc. with and into the Registrant (incorporated by reference to Exhibit 3(m) to the Registrant's Annual Report on Form 10-K for the year 1999).

3(n)

Certificate of Amendment to Restated Certificate of Incorporation (incorporated by reference to Exhibit 3(n) to the Registrant's Registration Statement on Form S-4 No.  333-41030 filed on July 7, 2000).

3(o)

Certificate of Ownership and Merger merging Power Trends, Inc. with and into the Registrant (incorporated by reference to Exhibit 3(o) to the Registrant's Annual Report on Form 10-K for the year 2001).

3(p)

Certificate of Ownership and Merger merging Amati Communications Corporation with and into the Registrant (incorporated by reference to Exhibit 3(p) to the Registrant's Annual Report on Form 10-K for the year 2001).

3(q)

Certificate of Ownership and Merger merging Texas Instruments San Diego Incorporated with and into the Registrant (incorporated by reference to Exhibit 3(q) to the Registrant's Annual Report on Form 10-K for the year 2002).

3(r)

Certificate of Ownership and Merger merging Texas Instruments Burlington Incorporated with and into the Registrant (incorporated by reference to Exhibit 3(r) to the Registrant's Annual Report on Form 10-K for the year 2003).

3(s)

Certificate of Ownership and Merger merging Texas Instruments Automotive Sensors and Controls San Jose Inc. with and into the Registrant (incorporated by reference to Exhibit 3(i) to the Registrant's Current Report on Form 8-K dated October 31, 2004).

3(t)

Certificate of Elimination of Series B Participating Cumulative Preferred Stock (incorporated by reference to Exhibit 3 to the Registrant's Current Report on Form 8-K dated June 23, 2008).

3(u)

By-Laws of the Registrant (incorporated by reference to Exhibit 3 to the Registrant's Current Report on Form 8-K dated July 18, 2008).

10(a)(i)

TI Deferred Compensation Plan (incorporated by reference to Exhibit 10(a) to the Registrant's Current Report on Form 8-K dated January 1, 2009).*


18

Designation of

Exhibit in
this Report

Description of Exhibit

10(a)(ii)

Amendment No. 1 to the TI Deferred Compensation Plan (incorporated by reference to Exhibit 10(a)(ii) to the Registrant's Annual Report on Form 10-K for the year ended December 31, 2009).*

10(b)(i)

TI Employees Non-Qualified Pension Plan (formerly named the TI Employees Supplemental Pension Plan) (incorporated by reference to Exhibit 10(b)(i) to the Registrant's Annual Report on Form 10-K for the year 1999).*

10(b)(ii)

First Amendment to TI Employees Non-Qualified Pension Plan (formerly named the TI Supplemental Pension Plan) (incorporated by reference to Exhibit 10(b)(ii) to the Registrant's Annual Report on Form 10-K for the year 1999).*

10(b)(iii)

Second Amendment to TI Employees Non-Qualified Pension Plan (formerly named the TI Supplemental Pension Plan) (incorporated by reference to Exhibit 10(b)(iii) to the Registrant's Annual Report on Form 10-K for the year 2002).*

10(b)(iv)

Third Amendment to TI Employees Non-Qualified Pension Plan (formerly named the TI Supplemental Pension Plan) (incorporated by reference to Exhibit 10(b)(iv) to the Registrant's Annual Report on Form 10-K for the year 2002).*

10(b)(v)

Fourth Amendment to TI Employees Non-Qualified Pension Plan (formerly named the TI Supplemental Pension Plan) (incorporated by reference to Exhibit 10(b)(v) to the Registrant's Annual Report on Form 10-K for the year 2003).*

10(b)(vi)

TI Employees Non-Qualified Pension Plan II (incorporated by reference to Exhibit 10(b) to the Registrant's Current Report on Form 8-K dated January 1, 2009).*

10(c)

Texas Instruments Long-Term Incentive Plan (incorporated by reference to Exhibit 10(a)(ii) to the Registrant's Annual Report on Form 10-K for the year 1993).*

10(d)

Texas Instruments 1996 Long-Term Incentive Plan (incorporated by reference to Exhibit 10 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended June 30, 1996).*

10(e)

Texas Instruments 2000 Long-Term Incentive Plan as amended October 16, 2008 (incorporated by reference to Exhibit 10(e) to the Registrant's Annual Report on Form 10-K for the year ended December 31, 2008).*

10(f)

Texas Instruments 2003 Long-Term Incentive Plan as amended October 16, 2008 (incorporated by reference to Exhibit 10(f) to the Registrant's Annual Report on Form 10-K for the year ended December 31, 2008).

10(g)

Texas Instruments Executive Officer Performance Plan as amended September 17, 2009 (incorporated by reference to Exhibit 10.2 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended September 30, 2009).*

10(h)

Texas Instruments Restricted Stock Unit Plan for Directors (incorporated by reference to Exhibit 10(e) to the Registrant's Quarterly Report on Form 10-Q for the quarter ended March 31, 1998).

10(i)

Texas Instruments Directors Deferred Compensation Plan (incorporated by reference to Exhibit 10(f) to the Registrant's Quarterly Report on Form 10-Q for the quarter ended March 31, 1998).

10(j)

Texas Instruments Stock Option Plan for Non-Employee Directors (incorporated by reference to Exhibit 10(i) to the Registrant's Annual Report on Form 10-K for the year 2000).


19

Designation of

Exhibit in

this Report

Description of Exhibit

10(k)

Texas Instruments 2003 Director Compensation Plan as amended October 16, 2008 (incorporated by reference to Exhibit 10(k) to the Registrant's Annual Report on Form 10-K for the year ended December 31, 2008).

10(l)

Form of Stock Option Agreement for Executive Officers under the Texas Instruments 2009 Long-Term Incentive Plan (incorporated by reference to Exhibit 10(l) to the Registrant's Annual Report on Form 10-K for the year ended December 31, 2009).*

10(m)

Form of Restricted Stock Unit Agreement under the Texas Instruments 2009 Long-Term Incentive Plan (incorporated by reference to Exhibit 10(m) to the Registrant's Annual Report on Form 10-K for the year ended December 31, 2009).*

10(n)

Asset and Stock Purchase Agreement dated as of January 8, 2006, between Texas Instruments Incorporated and S&C Purchase Corp. (incorporated by reference to Exhibit 2.1 to the Registrant's Current Report on Form 8-K dated January 8, 2006).

10(o)

Texas Instruments 2009 Long-Term Incentive Plan as amended September 17, 2009 (incorporated by reference to Exhibit 10.1 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended September 30, 2009).

10(p)

Texas Instruments 2009 Director Compensation Plan as amended December 2, 2010 (incorporated by reference to Exhibit 10 to the Registrant's Current Report on Form 8-K dated December 7, 2010).

13

Portions of Registrant's 2010 Annual Report to Stockholders incorporated by reference herein.**

21

List of Subsidiaries of the Registrant.**

23

Consent of Independent Registered Public Accounting Firm.**

31(a)

Rule 13a-14(a)/15(d)-14(a) Certification of Chief Executive Officer.**

31(b)

Rule 13a-14(a)/15(d)-14(a) Certification of Chief Financial Officer.**

32(a)

Section 1350 Certification of Chief Executive Officer.**

32(b)

Section 1350 Certification of Chief Financial Officer.**

101.ins

Instance Document***

101.sch

XBRL Taxonomy Schema***

101.cal

XBRL Taxonomy Calculation Linkbase***

101.lab

XBRL Taxonomy Labels Linkbase***

101.pre

XBRL Taxonomy Presentation Linkbase***

101.Def

XBRL Taxonomy Definitions Document***


*

Management compensation plans and arrangements.

**

Filed with the 10-K.

***

Furnished, not filed, herewith.


20


"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995:


This report includes forward-looking statements intended to qualify for the safe harbor from liability established by the Private Securities Litigation Reform Act of 1995.  These forward-looking statements generally can be identified by phrases such as TI or its management "believes," "expects," "anticipates," "foresees," "forecasts," "estimates" or other words or phrases of similar import.  Similarly, statements herein that describe TI's business strategy, outlook, objectives, plans, intentions or goals also are forward-looking statements.  All such forward-looking statements are subject to certain risks and uncertainties that could cause actual results to differ materially from those in forward-looking statements.


We urge you to carefully consider the following important factors that could cause actual results to differ materially from the expectations of TI or its management:


Market demand for semiconductors, particularly in key markets such as communications, computing, industrial, and consumer electronics;

TI's ability to maintain or improve profit margins, including its ability to utilize its manufacturing facilities at sufficient levels to cover its fixed operating costs, in an intensely competitive and cyclical industry;

TI's ability to develop, manufacture and market innovative products in a rapidly changing technological environment;

TI's ability to compete in products and prices in an intensely competitive industry;

TI's ability to maintain and enforce a strong intellectual property portfolio and obtain needed licenses from third parties;

Expiration of license agreements between TI and its patent licensees, and market conditions reducing royalty payments to TI;

Economic, social and political conditions in the countries in which TI, its customers or its suppliers operate, including security risks, health conditions, possible disruptions in transportation networks and fluctuations in foreign currency exchange rates;

Natural events such as severe weather and earthquakes in the locations in which TI, its customers or its suppliers operate;

Availability and cost of raw materials, utilities, manufacturing equipment, third-party manufacturing services and manufacturing technology;

Changes in the tax rate applicable to TI as the result of changes in tax law, the jurisdictions in which profits are determined to be earned and taxed, the outcome of tax audits and the ability to realize deferred tax assets;

Changes in laws and regulations to which TI or its suppliers are or may become subject, such as those imposing fees or reporting or substitution costs relating to the discharge of emissions into the environment or the use of certain raw materials in our manufacturing processes;

Losses or curtailments of purchases from key customers and the timing and amount of distributor and other customer inventory adjustments;

Customer demand that differs from our forecasts;

The financial impact of inadequate or excess TI inventory that results from demand that differs from projections;

Impairments of our non-financial assets;

Product liability or warranty claims, claims based on epidemic or delivery failure or recalls by TI customers for a product containing a TI part;

TI's ability to recruit and retain skilled personnel; and

Timely implementation of new manufacturing technologies, installation of manufacturing equipment and the ability to obtain needed third-party foundry and assembly/test subcontract services.


21


For a more detailed discussion of these factors see the Risk Factors discussion in Item 1A of this report.  The forward-looking statements included in this report are made only as of the date of this report and we undertake no obligation to update the forward-looking statements to reflect subsequent events or circumstances.


22


SIGNATURE


Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.


TEXAS INSTRUMENTS INCORPORATED

By:

/s/ Kevin P. March

Kevin P. March

Senior Vice President,

Chief Financial Officer

and Chief Accounting Officer


Date: February 25, 2011


Each person whose signature appears below constitutes and appoints each of Richard K. Templeton, Kevin P. March and Joseph F. Hubach, or any of them, each acting alone, his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution, for such person and in his or her name, place and stead, in any and all capacities in connection with the annual report on Form 10-K of Texas Instruments Incorporated for the year ended December 31, 2010, to sign any and all amendments to the Form 10-K, and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, each acting alone, full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or their substitutes or substitute, may lawfully do or cause to be done by virtue hereof.


Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the Registrant and in the capacities indicated on the 25th day of February 2011.


Signature

Title

/s/ Ralph W. Babb, Jr.

Ralph W. Babb, Jr.

Director

/s/ David L. Boren

David L. Boren

Director

/s/ Daniel A. Carp

Daniel A. Carp

Director

/s/ Carrie S. Cox

Carrie S. Cox

Director

/s/ David R. Goode

David R. Goode

Director

/s/ Stephen P. MacMillan

Stephen P. MacMillan

Director

/s/ Pamela H. Patsley

Pamela H. Patsley

Director


23


/s/ Wayne R. Sanders

Wayne R. Sanders

Director

/s/ Ruth J. Simmons

Ruth J. Simmons

Director

/s/ Richard K. Templeton

Richard K. Templeton

Chairman of the Board; Director; President and Chief Executive Officer

/s/ Christine Todd Whitman

Christine Todd Whitman

Director

/s/ Kevin P. March

Kevin P. March

Senior Vice President; Chief Financial Officer; Chief Accounting Officer


24


TEXAS INSTRUMENTS INCORPORATED AND SUBSIDIARIES


INDEX TO FINANCIAL STATEMENTS

(Item 15(a))


Page

Reference in

2010 Annual

Report to

Stockholders

Information incorporated by reference to the Registrant's 2010 annual report to stockholders

Consolidated financial statements:

Income for each of the three years in the period ended December 31, 2010

2

Comprehensive income for each of the three years in the period ended December 31, 2010

3

Balance sheets at December 31, 2010 and 2009

4

Cash flows for each of the three years in the period ended December 31, 2010

5

Stockholders' equity for each of the three years in the period ended December 31, 2010

6

Notes to financial statements

7

Report of independent registered public accounting firm

31

Report by management on internal control over financial reporting

32

Report of independent registered public accounting firm on internal control over financial reporting

33


Schedules have been omitted because the required information is not present or not present in amounts sufficient to require submission of the schedule, or because the information required is included in the consolidated financial statements or the notes thereto.

25