Heico Corp (HEI) SEC Annual Report (10-K) for 2015

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Commission file number 1-4604

(Exact name of registrant as specified in its charter)

Registrant's telephone number, including area code: (954) 987-4000

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ý No o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No ý

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ý No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

Large accelerated filer ý Accelerated filer o Non-accelerated filer o Smaller reporting company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes o No ý

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant was $3,069,162,000 based on the closing price of HEICO Common Stock and Class A Common Stock as of April 30, 2015 as reported by the New York Stock Exchange.

DOCUMENTS INCORPORATED BY REFERENCE

HEICO Corporation through its subsidiaries (collectively, "HEICO," "we," "us," "our" or the "Company") believes it is the world's largest manufacturer of Federal Aviation Administration ("FAA")-approved jet engine and aircraft component replacement parts, other than the original equipment manufacturers ("OEMs") and their subcontractors.  HEICO also believes it is a leading manufacturer of various types of electronic equipment for the aviation, defense, space, industrial, medical, telecommunications and electronics industries.

The Company was originally organized in 1957 as a holding company known as HEICO Corporation.  As part of a reorganization completed in 1993, the original holding company (formerly known as HEICO Corporation) was renamed as HEICO Aerospace Corporation and a new holding corporation known as HEICO Corporation was created.  The reorganization did not result in any change in the business of the Company, its consolidated assets or liabilities or the relative interests of its shareholders.

Our business is comprised of two operating segments:

The Flight Support Group . Our Flight Support Group ("FSG"), consisting of HEICO Aerospace Holdings Corp. and HEICO Flight Support Corp. and their collective subsidiaries, accounted for 68%, 67% and 66% of our net sales in fiscal 2015, 2014 and 2013, respectively.  The Flight Support Group uses proprietary technology to design and manufacture jet engine and aircraft component replacement parts for sale at lower prices than those manufactured by OEMs.  These parts are approved by the FAA and are the functional equivalent of parts sold by OEMs.  In addition, the Flight Support Group repairs, overhauls and distributes jet engine and aircraft components, avionics and instruments for domestic and foreign commercial air carriers and aircraft repair companies as well as military and business aircraft operators; and manufactures thermal insulation products, complex composite assemblies and other component parts primarily for aerospace, defense, industrial and commercial applications.

The Electronic Technologies Group . Our Electronic Technologies Group ("ETG"), consisting of HEICO Electronic Technologies Corp. and its subsidiaries, accounted for 32%, 33% and 34% of our net sales in fiscal 2015, 2014 and 2013, respectively.  Through our Electronic Technologies Group, which derived approximately 56%, 55% and 52% of its sales in fiscal 2015, 2014 and 2013, respectively, from the sale of products and services to United States ("U.S.") and foreign military agencies, prime defense contractors and both commercial and defense satellite and spacecraft manufacturers, we design, manufacture and sell various types of electronic, microwave and electro-optical products, including infrared simulation and test equipment, laser rangefinder receivers, electrical power supplies, back-up power supplies, power conversion products, underwater locator beacons, electromagnetic interference and radio frequency interference shielding, high power capacitor charging power supplies, amplifiers,

traveling wave tube amplifiers, photodetectors, amplifier modules, microwave power modules, flash lamp drivers, laser diode drivers, arc lamp power supplies, custom power supply designs, cable assemblies, high voltage power supplies, high voltage interconnection devices and wire, high voltage energy generators, high frequency power delivery systems, three-dimensional microelectronic and stacked memory products, harsh environment electronic connectors and other interconnect products, RF and microwave amplifiers, transmitters and receivers, wireless cabin control systems, solid state power distribution and management systems, communications and electronic intercept receivers and tuners, fuel level sensing systems and high-speed interface products that link devices such as telemetry receivers, digital cameras, high resolution scanners, simulation systems and test systems to almost any computer.

HEICO has continuously operated in the aerospace industry for more than 55 years. Since assuming control in 1990, our current management has achieved significant sales and profit growth through a broadened line of product offerings, an expanded customer base, increased research and development expenditures and the completion of a number of acquisitions.  As a result of internal growth and acquisitions, our net sales from continuing operations have grown from $26.2 million in fiscal 1990 to $1,188.6 million in fiscal 2015, a compound annual growth rate of approximately 16%.  During the same period, we improved our net income from $2.0 million to $133.4 million, representing a compound annual growth rate of approximately 18%.

Acquisitions have been an important element of our growth strategy over the past twenty-five years, supplementing our organic growth.  Since 1990, we have completed approximately 60 acquisitions complementing the niche segments within which we operate of the aviation, defense, space, medical, telecommunications and electronics industries.  We typically target acquisition opportunities that allow us to broaden our product offerings, services and technologies while expanding our customer base and geographic presence.  Even though we have historically pursued an active acquisition policy, our disciplined acquisition strategy involves limiting acquisition candidates to businesses that we believe will continue to grow, offer strong earnings and cash flow potential, and are available at fair prices. See Note 2, Acquisitions, of the Notes to Consolidated Financial Statements for further information regarding our recent acquisitions.

The Flight Support Group, headquartered in Hollywood, Florida, serves a broad spectrum of the aviation industry, including (i) commercial airlines and air cargo carriers; (ii) repair and overhaul facilities; (iii) OEMs; and (iv) U.S. and foreign governments.

The Flight Support Group competes with the leading industry OEMs and, to a lesser extent, with a number of smaller, independent parts distributors.  Historically, the three principal jet engine OEMs, General Electric (including CFM International), Pratt & Whitney and Rolls Royce, have been the sole source of substantially all jet engine replacement parts for their jet

engines.  Other OEMs have been the sole source of replacement parts for their aircraft component parts.  While we believe that we currently supply less than 2% of the market for jet engine and aircraft component replacement parts, we have in recent years been adding new products to our line at a rate of approximately 300 to 500 Parts Manufacturer Approvals ("PMA" or "PMAs") per year.  We have developed for our customers approximately 10,000 parts for which PMAs have been received from the FAA.

Jet engine and aircraft component replacement parts can be categorized by their ongoing ability to be repaired and returned to service.  The general categories in which we participate are as follows: (i) rotable; (ii) repairable; and (iii) expendable.  A rotable is a part which is removed periodically as dictated by an operator's maintenance procedures or on an as needed basis and is typically repaired or overhauled and re-used an indefinite number of times.  An important subset of rotables is "life limited" parts.  A life limited rotable has a designated number of allowable flight hours and/or cycles (one take-off and landing generally constitutes one cycle) after which it is rendered unusable.  A repairable is similar to a rotable except that it can only be repaired a limited number of times before it must be discarded.  An expendable is generally a part which is used and not thereafter repaired for further use.

Jet engine and aircraft component replacement parts are classified within the industry as (i) factory-new; (ii) new surplus; (iii) overhauled; (iv) repairable; and (v) as removed.  A factory-new or new surplus part is one that has never been installed or used.  Factory-new parts are purchased from FAA-approved manufacturers (such as HEICO or OEMs) or their authorized distributors.  New surplus parts are purchased from excess stock of airlines, repair facilities or other redistributors.  An overhauled part is one that has been completely repaired and inspected by a licensed repair facility such as ours.  An aircraft spare part is classified as "repairable" if it can be repaired by a licensed repair facility under applicable regulations.  A part may also be classified as "repairable" if it can be removed by the operator from an aircraft or jet engine while operating under an approved maintenance program and is airworthy and meets any manufacturer or time and cycle restrictions applicable to the part.  A "factory-new," "new surplus" or "overhauled" part designation indicates that the part can be immediately utilized on an aircraft.  A part in "as removed" or "repairable" condition requires inspection and possibly functional testing, repair or overhaul by a licensed facility prior to being returned to service in an aircraft.

Factory-New Jet Engine and Aircraft Component Replacement Parts .  The Flight Support Group engages in the research and development, design, manufacture and sale of FAA-approved replacement parts that are sold to domestic and foreign commercial air carriers and aircraft repair and overhaul companies.  Our principal competitors are aircraft engine and aircraft component manufacturers.  The Flight Support Group's factory-new replacement parts include various jet engine and aircraft component replacement parts.  A key element of our growth strategy is the continued design and development of an increasing number of PMA replacement parts in order to further penetrate our existing customer base and obtain new customers.  We select the jet engine and aircraft component replacement parts to design and manufacture through a selection process which analyzes industry information to determine which replacement parts are suitable candidates.

Repair and Overhaul Services .  The Flight Support Group provides repair and overhaul services on selected jet engine and aircraft component parts, as well as on avionics, instruments, composites and flight surfaces of commercial aircraft operated by domestic and foreign commercial airlines.  The Flight Support Group also provides repair and overhaul services including avionics and navigation systems as well as subcomponents and other instruments utilized on military aircraft operated by the U.S. government and foreign military agencies and for aircraft repair and overhaul companies.  Our repair and overhaul operations require a high level of expertise, advanced technology and sophisticated equipment.  Services include the repair, refurbishment and overhaul of numerous accessories and parts mounted on gas turbine engines and airframes.  Components overhauled include fuel pumps, generators, fuel controls, pneumatic valves, starters and actuators, turbo compressors and constant speed drives, hydraulic pumps, valves and actuators, wheels and brakes, composite flight controls, electro-mechanical equipment, auxiliary power unit accessories and thrust reverse actuation systems.  Some of the repair and overhaul services provided by the Flight Support Group are proprietary repairs approved by an FAA-qualified designated engineering representative ("DER").  Such FAA-approved repairs (DER-approved repairs) typically create cost savings or provide engineering flexibility.  The Flight Support Group also provides commercial airlines, regional operators, asset management companies and Maintenance, Repair and Overhaul ("MRO") providers with high quality and cost effective niche accessory component exchange services as an alternative to OEMs' spares services.

Distribution .  The Flight Support Group distributes FAA-approved parts including hydraulic, pneumatic, structural, mechanical and electro-mechanical components for the commercial, regional and general aviation markets.  The Flight Support Group also is a leading supplier, distributor, and integrator of military aircraft parts and support services primarily to foreign military organizations allied with the U.S. Further, we believe the Flight Support Group is a leading provider of products and services necessary to maintain up-to-date F-16 fighter aircraft operational capabilities. 

Manufacture of Specialty Aircraft/Defense Related Parts and Subcontracting for OEMs .  The Flight Support Group engineers, designs and manufactures thermal insulation blankets and parts as well as renewable/reusable insulation systems primarily for aerospace, defense, commercial and industrial applications.  The Flight Support Group also manufactures specialty components for sale as a subcontractor for aerospace and industrial original equipment manufacturers and the U.S. government. Additionally, the Flight Support Group manufactures advanced niche components and complex composite assemblies for commercial aviation, defense and space applications and manufactures expanded foil mesh, which is integrated into composite aerospace structures for lighting strike protection in fixed and rotary wing aircraft.

FAA Approvals and Product Design .  Non-OEM manufacturers of jet engine and aircraft component replacement parts must receive a PMA from the FAA to sell the replacement part.  The PMA approval process includes the submission of sample parts, drawings and testing data to one of the FAA's Aircraft Certification Offices where the submitted data are analyzed.  We believe that an applicant's ability to successfully complete the PMA process is limited by several factors, including (i) the agency's confidence level in the applicant; (ii) the

complexity of the part; (iii) the volume of PMAs being filed; and (iv) the resources available to the FAA.  We also believe that companies such as HEICO that have demonstrated their advanced design engineering and manufacturing capabilities, including an established favorable track record with the FAA, generally receive a faster turnaround time in the processing of PMA applications.  Finally, we believe that the PMA process creates a significant barrier to entry in this market niche through both its technical demands and its limits on the rate at which competitors can bring products to market.

As part of our growth strategy, we have continued to increase our research and development activities.  Research and development expenditures by the Flight Support Group, which were approximately $.3 million in fiscal 1991, increased to approximately $17.7 million in fiscal 2015, $16.1 million in fiscal 2014 and $14.2 million in fiscal 2013.  We believe that our Flight Support Group's research and development capabilities are a significant component of our historical success and an integral part of our growth strategy.  In recent years, the FAA granted us PMAs for approximately 300 to 500 new parts and approximately 300 to 400 DER-approved repairs per year; however, no assurance can be given that the FAA will continue to grant PMAs or DER-approved repairs or that we will achieve acceptable levels of net sales and gross profits on such parts or repairs in the future.

We benefit from our proprietary rights relating to certain design, engineering and manufacturing processes and repair and overhaul procedures.  Customers often rely on us to provide initial and additional components, as well as to redesign, re-engineer, replace or repair and provide overhaul services on such aircraft components at every stage of their useful lives.  In addition, for some products, our unique manufacturing capabilities are required by the customer's specifications or designs, thereby necessitating reliance on us for production of such designed products.

We have no material patents for the proprietary techniques, including software and manufacturing expertise, we have developed to manufacture jet engine and aircraft component replacement parts and instead, we primarily rely on trade secret protection.  Although our proprietary techniques and software and manufacturing expertise are subject to misappropriation or obsolescence, we believe that we take appropriate measures to prevent misappropriation or obsolescence from occurring by developing new techniques and improving existing methods and processes, which we will continue on an ongoing basis as dictated by the technological needs of our business.

We believe that, based on our competitive pricing, reputation for high quality, short lead time requirements, strong relationships with domestic and foreign commercial air carriers and repair stations (companies that overhaul aircraft engines and/or components), and successful track record of receiving PMAs and DER-approved repairs from the FAA, we are uniquely positioned to continue to increase the products and services offered and gain market share.

Our Electronic Technologies Group's strategy is to design and produce mission-critical subcomponents for smaller, niche markets, but which are utilized in larger systems – systems like targeting, tracking, identification, simulation, testing, communications, lighting, surgical, medical imaging, baggage scanning, telecom and computer systems.  These systems are, in turn, often located on another platform, such as aircraft, satellites, ships, spacecrafts, land vehicles, handheld devices and other platforms.

Electro-Optical Infrared Simulation and Test Equipment .  The Electronic Technologies Group believes it is a leading international designer and manufacturer of niche state-of-the-art simulation, testing and calibration equipment used in the development of missile seeking technology, airborne targeting and reconnaissance systems, shipboard targeting and reconnaissance systems, space-based sensors as well as ground vehicle-based systems. These products include infrared scene projector equipment, such as our MIRAGE IR Scene Simulator, high precision blackbody sources, software and integrated calibration systems.

Simulation equipment allows the U.S. government and allied foreign military to save money on missile testing as it allows infrared-based missiles to be tested on a multi-axis, rotating table instead of requiring the launch of a complete missile.  In addition, several large military prime contractors have elected to purchase such equipment from us instead of maintaining internal staff to do so because we can offer a more cost-effective solution.  Our customers include major U.S. Department of Defense weapons laboratories and defense prime contractors.

Electro-Optical Laser Products .  The Electronic Technologies Group believes it is a leading designer and maker of Laser Rangefinder Receivers and other photodetectors used in airborne, vehicular and handheld targeting systems manufactured by major prime military contractors.  Most of our Rangefinder Receiver product offering consists of complex and patented products which detect reflected light from laser targeting systems and allow the systems to confirm target accuracy and calculate target distances prior to discharging a weapon system.  Some of these products are also used in laser eye surgery systems for tracking ocular movement.

Electro-Optical, Microwave and Other Power Equipment .  The Electronic Technologies Group produces power supplies, amplifiers and flash lamp drivers used in laser systems for military, medical and other applications that are sometimes utilized with our rangefinder receivers.  We also produce emergency back-up power supplies and batteries used on commercial aircraft and business jets for services such as emergency exit lighting, emergency fuel shut-off, power door assists, cockpit voice recorders and flight computers. We also design and manufacture next generation wireless cabin control systems, solid state power distribution and management systems and fuel level sensing systems for business jets and for general aviation, as well as for the military/defense market. We offer custom or standard designs that solve challenging OEM requirements and meet stringent safety and emissions requirements.  Our power electronics products include capacitor charger power supplies, laser diode drivers, arc lamp power supplies and custom power supply designs.

Our microwave products are used in both commercial and military satellites, spacecrafts and in electronic warfare systems.  These products, which include isolators, bias tees, circulators, latching ferrite switches and waveguide adapters are used in satellites and spacecrafts to control or direct energy according to operator needs. As satellites are frequently used as sensors for stand-off warfare, we believe this product line further supports our goal of increasing our activity in the stand-off market. Additionally, our microwave products include converters, receivers, transmitters, amplifiers, frequency sources and related sub-systems that address all major satellite frequencies. We believe we are a leading supplier of the niche products which we design and manufacture for this market, a market that includes commercial satellites.  Our customers for these products include satellite and spacecraft manufacturers.

Electromagnetic and Radio Interference Shielding .  The Electronic Technologies Group designs and manufactures shielding used to prevent electromagnetic energy and radio frequencies from interfering with other devices, such as computers, telecommunication devices, avionics, weapons systems and other electronic equipment.  Our products include a patented line of shielding applied directly to circuit boards and a line of gasket-type shielding applied to computers and other electronic equipment.  Our customers consist essentially of medical, electronics, telecommunications and defense equipment producers.

High-Speed Interface Products .  The Electronic Technologies Group designs and manufactures advanced high-technology, high-speed interface products utilized in homeland security, defense, medical research, astronomical and other applications across numerous industries.

High Voltage Interconnection Devices .  The Electronic Technologies Group designs and manufactures high and very high voltage interconnection devices, cable assemblies and wire for the medical equipment, defense and other industrial markets.  Among others, our products are utilized in aircraft missile defense, fighter pilot helmet displays, avionic systems, medical applications, wireless communications, and industrial applications including high voltage test equipment and underwater monitoring systems.

High Voltage Advanced Power Electronics .  The Electronic Technologies Group designs and manufactures a patented line of high voltage energy generators for medical, baggage inspection and industrial imaging systems, and offers a patented line of high frequency power delivery systems for the commercial sign industry.  We also produce high voltage power supplies found in satellite communications, CT scanners and in medical and industrial x-ray systems.

Power Conversion Products .  The Electronic Technologies Group designs and provides innovative power conversion products principally serving the high-reliability military, space and commercial avionics end-markets. These high density, low profile and lightweight DC-to-DC converters and electromagnetic interference filters, which include thick film hermetically sealed hybrids, military commercial-off-the-shelf and custom designed and assembled products, have become the primary specified components of their kind on a generation of complex military, space and avionics equipment.

Underwater Locator Beacons .  The Electronic Technologies Group designs and manufactures Underwater Locator Beacons ("ULBs") used to locate aircraft Cockpit Voice Recorders and Flight Data Recorders, marine ship Voyage Recorders and various other devices which have been submerged under water.  ULBs are required equipment on all U.S. FAA and European Aviation Safety Agency ("EASA") approved Flight Data and Cockpit Voice Recorders used in aircraft and on similar systems utilized on large marine shipping vessels.

Traveling Wave Tube Amplifiers ("TWTAs") and Microwave Power Modules ("MPMs") .  The Electronic Technologies Group designs and manufactures TWTAs and MPMs predominately used in radar, electronic warfare, on-board jamming and countermeasure systems in aircraft, ships and detection platforms deployed by U.S. and allied non-U.S. military forces.

Three-Dimensional Microelectronic and Stacked Memory Products .  The Electronic Technologies Group designs, manufactures and markets three-dimensional microelectronic and stacked memory products including memories, Point of Load ("POL") voltage converters and peripherals, industrial memories, and complex System-In-Package ("SiP") solutions.  The products' patented designs provide high reliability memory and circuitry in a unique and stacked form which saves space and weight.  These products are principally integrated into larger subsystems equipping satellites and spacecraft and are also utilized in medical equipment.

Harsh environment connectivity products and custom molded cable assemblies .  The Electronic Technologies Group designs and manufactures high performance, high reliability and harsh environment electronic connectors and other interconnect products.  These products include connectors, jacks and plugs, cables, patch panels and switches utilized in aviation, broadcast/audio, defense, industrial, medical and other equipment.

RF and microwave amplifiers, transmitters and receivers. The Electronic Technologies Group designs and manufactures RF and microwave amplifiers, transmitters and receivers to support military communications on unmanned aerial systems, other aircraft, helicopters and ground-based data/communications systems.

High performance communications and electronic intercept receivers and tuners. The Electronic Technologies Group designs and manufactures innovative, high performance receiver and radio frequency digitizer products for military and intelligence applications.

As part of our growth strategy, we have continued to invest in our research and development activities.  Research and development expenditures by the Electronic Technologies Group were $21.0 million in fiscal 2015, $21.3 million in fiscal 2014 and $18.7 million in fiscal 2013.  We believe that our Electronic Technologies Group's research and development capabilities are a significant component of our historical success and an integral part of our growth strategy.

See Note 14, Operating Segments, of the Notes to Consolidated Financial Statements for financial information by operating segment and by geographic areas.

Each of our operating segments independently conducts distribution, sales and marketing efforts directed at their respective customers and industries and, in some cases, collaborates with other operating divisions and subsidiaries within its group for cross-marketing efforts.  Sales and marketing efforts are conducted primarily by in-house personnel and, to a lesser extent, by independent manufacturers' representatives.  Generally, the in-house sales personnel receive a base salary plus commission and manufacturers' representatives receive a commission on sales.

We believe that direct relationships are crucial to establishing and maintaining a strong customer base and, accordingly, our senior management is actively involved in our marketing activities, particularly with established customers.  We are also a member of various trade and business organizations related to the commercial aviation industry, such as the Aerospace Industries Association, which we refer to as AIA, the leading trade association representing the nation's manufacturers of commercial, military and business aircraft, aircraft engines and related components and equipment.  Due in large part to our established industry presence, we enjoy strong customer relations, name recognition and repeat business.

We sell our products to a broad customer base consisting of domestic and foreign commercial and cargo airlines, repair and overhaul facilities, other aftermarket suppliers of aircraft engine and airframe materials, OEMs, domestic and foreign military units, electronic manufacturing services companies, manufacturers for the defense industry as well as medical, telecommunications, scientific, and industrial companies.  No one customer accounted for sales of 10% or more of total consolidated sales from continuing operations during any of the last three fiscal years.  Net sales to our five largest customers accounted for approximately 17%, 17% and 15% of total net sales in fiscal 2015, 2014 and 2013, respectively.

The aerospace product and service industry is characterized by intense competition. Some of our competitors have substantially greater name recognition, inventories, complementary product and service offerings, financial, marketing and other resources than we do.  As a result, such competitors may be able to respond more quickly to customer requirements than we can.  Moreover, smaller competitors may be in a position to offer more attractive pricing as a result of lower labor costs and other factors.

Our jet engine and aircraft component replacement parts business competes primarily with aircraft engine and aircraft component manufacturers.  The competition is principally based on price and service to the extent that our parts are interchangeable.  With respect to other aerospace products and services sold by the Flight Support Group, we compete with both the leading jet engine and aircraft component OEMs and a large number of machining, fabrication,

distribution and repair companies, some of which have greater financial and other resources than we do.  Competition is based mainly on price, product performance, service and technical capability.

Competition for the repair and overhaul of jet engine and aircraft components comes from three principal sources: OEMs, major commercial airlines and other independent service companies.  Some of these competitors have greater financial and other resources than we do.  Some major commercial airlines own and operate their own service centers and sell repair and overhaul services to other aircraft operators.  Foreign airlines that provide repair and overhaul services typically provide these services for their own aircraft components and for third parties.  OEMs also maintain service centers that provide repair and overhaul services for the components they manufacture.  Other independent service organizations also compete for the repair and overhaul business of other users of aircraft components.  We believe that the principal competitive factors in the repair and overhaul market are quality, turnaround time, overall customer service and price.

Our Electronic Technologies Group competes with several large and small domestic and foreign competitors, some of which have greater financial and other resources than we do.  The markets for our electronic products are niche markets with several competitors where competition is based mainly on design, technology, quality, price, service and customer satisfaction.

We purchase a variety of raw materials, primarily consisting of high temperature alloy sheet metal and castings, forgings, pre-plated metals and electrical components from various vendors.  The materials used by our operations are generally available from a number of sources and in sufficient quantities to meet current requirements subject to normal lead times. We are subject to rules promulgated by the Securities Exchange Commission pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act regarding the use of certain materials (tantalum, tin, gold and tungsten), known as conflict minerals, which are mined from the Democratic Republic of the Congo and adjoining countries. These rules may impose additional costs and may introduce new risks related to our ability to verify the origin of any conflict minerals used in our products.

Our total backlog of unshipped orders was $349 million as of October 31, 2015 as compared to $291 million as of October 31, 2014. Substantially the entire backlog of orders as of October 31, 2015 is expected to be delivered during fiscal 2016. The Flight Support Group's backlog of unshipped orders was $186 million as of October 31, 2015 as compared to $135 million as of October 31, 2014.  This backlog excludes forecasted shipments for certain contracts of the Flight Support Group pursuant to which customers provide only estimated annual usage and not firm purchase orders.  Our backlogs within the Flight Support Group are typically short-lead in nature with many product orders being received within the month of shipment. The

increase in the Flight Support Group's backlog is principally related to the backlog of the businesses acquired during fiscal 2015. The Electronic Technologies Group's backlog of unshipped orders was $163 million as of October 31, 2015 as compared to $156 million as of October 31, 2014. The increase in the Electronic Technologies Group's backlog is principally related to the backlog of a business acquired during fiscal 2015.

The FAA regulates the manufacture, repair and operation of all aircraft and aircraft parts operated in the United States.  Its regulations are designed to ensure that all aircraft and aviation equipment are continuously maintained in proper condition to ensure safe operation of the aircraft.  Similar rules apply in other countries.  All aircraft must be maintained under a continuous condition monitoring program and must periodically undergo thorough inspection and maintenance.  The inspection, maintenance and repair procedures for the various types of aircraft and equipment are prescribed by regulatory authorities and can be performed only by certified repair facilities utilizing certified technicians.  Certification and conformance is required prior to installation of a part on an aircraft.  Aircraft operators must maintain logs concerning the utilization and condition of aircraft engines, life-limited engine parts and airframes.  In addition, the FAA requires that various maintenance routines be performed on aircraft engines, some engine parts, and airframes at regular intervals based on cycles or flight time.  Engine maintenance must also be performed upon the occurrence of certain events, such as foreign object damage in an aircraft engine or the replacement of life-limited engine parts.  Such maintenance usually requires that an aircraft engine be taken out of service.  Our operations may in the future be subject to new and more stringent regulatory requirements.  In that regard, we closely monitor the FAA and industry trade groups in an attempt to understand how possible future regulations might impact us.  Our businesses which sell defense products directly to the U.S. Government or for use in systems delivered to the U.S. Government can be subject to various laws and regulations governing pricing and other factors.

There has been no material adverse effect to our consolidated financial statements as a result of these government regulations.

Our operations are subject to extensive, and frequently changing, federal, state and local environmental laws and substantial related regulation by government agencies, including the Environmental Protection Agency.  Among other matters, these regulatory authorities impose requirements that regulate the operation, handling, transportation and disposal of hazardous materials; protect the health and safety of workers; and require us to obtain and maintain licenses and permits in connection with our operations.  This extensive regulatory framework imposes significant compliance burdens and risks on us.  Notwithstanding these burdens, we believe that we are in material compliance with all federal, state and local environmental laws and regulations governing our operations.

There has been no material adverse effect to our consolidated financial statements as a result of these environmental regulations.

We are also subject to a variety of other regulations including work-related and community safety laws.  The Occupational Safety and Health Act of 1970 mandates general requirements for safe workplaces for all employees and established the Occupational Safety and Health Administration ("OSHA") in the Department of Labor.  In particular, OSHA provides special procedures and measures for the handling of some hazardous and toxic substances.  In addition, specific safety standards have been promulgated for workplaces engaged in the treatment, disposal or storage of hazardous waste.  Requirements under state law, in some circumstances, may mandate additional measures for facilities handling materials specified as extremely dangerous.  We believe that our operations are in material compliance with OSHA's health and safety requirements.

We are a named insured under policies which include the following coverage: (i) product liability, including grounding; (ii) personal property, inventory and business interruption at our facilities; (iii) general liability coverage; (iv) employee benefit liability; (v) international liability and automobile liability; (vi) umbrella liability coverage; and (vii) various other activities or items, each subject to certain limits and deductibles.  We believe that our insurance coverage is adequate to insure against the various liability risks of our business.

As of October 31, 2015, we had approximately 4,600 full-time and part-time employees including approximately 2,900 in the Flight Support Group and approximately 1,700 in the Electronic Technologies Group.  None of our employees are represented by a U.S. domestic union.  Our management believes that we have good relations with our employees.

Our Internet website address is http://www.heico.com.  We make available free of charge, through the Investors section of our website, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, specialized disclosure reports on Form SD and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission ("SEC").  These materials are also available free of charge on the SEC's website at http://www.sec.gov.  The information on or obtainable through our website is not incorporated into this annual report on Form 10-K.

We have adopted a code of ethics that applies to our principal executive officer, principal financial officer, principal accounting officer or controller and other persons performing similar functions.  Our Code of Ethics for Senior Financial Officers and Other Officers is part of our Code of Business Conduct, which is located on our website at http://www.heico.com.  Any amendments to or waivers from a provision of this code of ethics will be posted on the website.  Also located on the website are our Corporate Governance Guidelines, Finance/Audit Committee Charter, Nominating & Corporate Governance Committee Charter, and Compensation Committee Charter.

Copies of the above referenced materials will be made available, free of charge, upon written request to the Corporate Secretary at the Company's headquarters.

Our executive officers are elected by the Board of Directors and serve at the discretion of the Board.  The following table sets forth the names, ages of, and positions and offices held by our executive officers as of December 15, 2015:

Laurans A. Mendelson has served as our Chairman of the Board since December 1990.  He has also served as our Chief Executive Officer since February 1990 and served as our President from September 1991 through September 2009.  Mr. Mendelson has served on the Board of Governors of the Aerospace Industries Association ("AIA") in Washington D.C., of which HEICO is a member.  He is the former Chairman of the Board of Trustees, former Chairman of the Executive Committee and a current member of the Society of Mount Sinai Founders of Mount Sinai Medical Center in Miami Beach, Florida.  In addition, Mr. Mendelson is a Trustee Emeritus of Columbia University in The City of New York, where he previously served as Trustee and Chairman of the Trustees' Audit Committee. Laurans Mendelson is the father of Eric Mendelson and Victor Mendelson.

Eric A. Mendelson has served as our Co-President since October 2009 and served as our Executive Vice President from 2001 through September 2009.  Mr. Mendelson has also served as President and Chief Executive Officer of the HEICO Flight Support Group since its formation in 1993, as well as President of various Flight Support Group subsidiaries. Mr. Mendelson is a co-

founder, and, since 1987, has been Managing Director of Mendelson International Corporation, a private investment company, which is a shareholder of HEICO.  In addition, Mr. Mendelson is a member of the Advisory Board of Trustees of Mount Sinai Medical Center in Miami Beach, Florida and Chairman of the Board of Trustees of Ransom Everglades School in Coconut Grove, Florida, as well as a member of the Board of Visitors of Columbia College in New York City.  Eric Mendelson is the son of Laurans Mendelson and the brother of Victor Mendelson.

Victor H. Mendelson has served as our Co-President since October 2009 and served as our Executive Vice President from 2001 through September 2009.  Mr. Mendelson has also served as President and Chief Executive Officer of the HEICO Electronic Technologies Group since its formation in September 1996.  He served as our General Counsel from 1993 to 2008 and our Vice President from 1996 to 2001.  In addition, Mr. Mendelson was the Chief Operating Officer of our former MediTek Health Corporation subsidiary from 1995 until its profitable sale in 1996.  Mr. Mendelson is a co-founder, and, since 1987, has been President of Mendelson International Corporation, a private investment company, which is a shareholder of HEICO.  Mr. Mendelson has served as a Director and Audit Committee of NASDAQ-listed Terrapin 3 Acquisition Corp. since July 2014. Mr. Mendelson is a Vice Chair of the Board of Visitors of Columbia College in New York City, a Trustee of St. Thomas University in Miami Gardens, Florida, a Director of Boys & Girls Clubs of Miami-Dade and is a Director and Immediate Past President of the Board of Directors of the Florida Grand Opera.  Victor Mendelson is the son of Laurans Mendelson and the brother of Eric Mendelson.

Thomas S. Irwin has served as our Senior Executive Vice President since June 2012; our Executive Vice President, Chief Financial Officer and Treasurer from September 1991 through May 2012; Senior Vice President and Treasurer from 1986 to 1991; and our Vice President and Treasurer from 1982 to 1986.  Mr. Irwin is a Certified Public Accountant.  He is a Trustee of the Greater Hollywood Chamber of Commerce and a member of the Board of Directors of the Greater Fort Lauderdale Alliance/Broward County.

Carlos L. Macau, Jr. has served as our Executive Vice President - Chief Financial Officer and Treasurer since June 2012. Mr. Macau joined HEICO from the international public accounting firm of Deloitte & Touche LLP where he worked from 2000 to 2012 as an Audit Partner. Prior to joining HEICO, Mr. Macau accumulated 22 years of financial and accounting experience serving a number of public and private manufacturing and service clients in a broad range of industries. His client responsibilities included serving as HEICO's lead client services partner for five years (2006 to 2010). Mr. Macau is a current member of the Mount Sinai Founders of Mount Sinai Medical Center in Miami Beach, Florida. Mr. Macau is a Certified Public Accountant, a Chartered Global Management Accountant, and a member of the American and Florida Institutes of Certified Public Accountants.

Steven M. Walker has served as our Chief Accounting Officer since June 2012 and served as our Corporate Controller from 2002 through May 2012. He has also served as our Assistant Treasurer since 2002. Mr. Walker is a Certified Public Accountant.

Our business, financial condition, operating results and cash flows may be impacted by a number of factors, many of which are beyond our control, including those set forth below and elsewhere in this Annual Report on Form 10-K, any one of which may cause our actual results to differ materially from anticipated results:

     General global industry and economic conditions that affect the aviation industry also affect our business.  We are subject to macroeconomic cycles and when recessions occur, we may experience reduced orders, payment delays, supply chain disruptions or other factors as a result of the economic challenges faced by our customers, prospective customers and suppliers.  Further, the aviation industry has historically been subject to downward cycles from time to time which reduce the overall demand for jet engine and aircraft component replacement parts and repair and overhaul services, and such downward cycles result in lower sales and greater credit risk.  Demand for commercial air travel can be influenced by airline industry profitability, world trade policies, government-to-government relations, terrorism, disease outbreaks, environmental constraints imposed upon aircraft operations, technological changes, price and other competitive factors.  These global industry and economic conditions may have a material adverse effect on our business, financial condition and results of operations.

Governmental agencies throughout the world, including the FAA, highly regulate the manufacture, repair and overhaul of aircraft parts and accessories.  We include, with the replacement parts that we sell to our customers, documentation certifying that each part complies with applicable regulatory requirements and meets applicable standards of airworthiness established by the FAA or the equivalent regulatory agencies in other countries.  In addition, our repair and overhaul operations are subject to certification pursuant to regulations established by the FAA.  Specific regulations vary from country to country, although compliance with FAA requirements generally satisfies regulatory requirements in other countries.  The revocation or suspension of any of our material authorizations or approvals would have an adverse effect on our business, financial condition and results of operations.  New and more stringent government regulations, if adopted and enacted, could have an adverse effect on our business, financial condition and results of operations.  In addition, some sales to foreign countries of the equipment manufactured by our Electronic Technologies Group require approval or licensing from the United States ("U.S.") government.  Denial of export licenses could reduce our sales to those countries and could have a material adverse effect on our business.

Pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act, the Securities and Exchange Commission promulgated disclosure requirements regarding the use of certain minerals (tantalum, tin, gold and tungsten), known as conflict minerals, which are mined from the Democratic Republic of the Congo or one of its adjoining countries. There are costs associated with complying with the disclosure requirements, such as costs related to determining the source of certain minerals used in our products, as well as costs of possible changes to products, processes, or sources of supply as a consequence of such verification activities. Given the complexity of our supply chain, we may not be able to ascertain the origin of these minerals used in our products in a timely manner, which could cause some of our customers to disqualify us as a supplier to the extent we are unable to certify our products are conflict mineral free. Additionally, the rule could affect sourcing at competitive prices and availability in sufficient quantities of such minerals used in our manufacturing processes for certain products.

Our Flight Support Group designs and manufactures jet engine and aircraft component replacement parts and also repairs, overhauls and distributes jet engine and aircraft components.  If aircraft or engines for which we offer replacement parts or supply repair and overhaul services are retired and there are fewer aircraft that require these parts or services, our revenues may decline.

In fiscal 2015, approximately 56% of the sales of our Electronic Technologies Group were derived from the sale of defense, commercial and defense satellite and spacecraft components and homeland security products.  A decline in defense, space or homeland security budgets or additional restrictions imposed by the U.S. government on sales of products or services to foreign military agencies could lower sales of our products and services.

We market our products and services to approximately 100 countries, with approximately 34% of our consolidated net sales in fiscal 2015 derived from sales to foreign customers.  We expect that sales to foreign customers will continue to account for a significant portion of our revenues in the foreseeable future.  As a result, we are subject to risks of doing business internationally, including the following:

While the impact of these factors is difficult to predict, any one or more of these factors may have a material adverse effect on our business, financial condition and results of operations.

We face significant competition in each of our businesses.

Flight Support Group

overhaul units;

Electronic Technologies Group

The aviation aftermarket supply industry is highly fragmented, has several highly visible leading companies, and is characterized by intense competition.  Some of our OEM competitors have greater name recognition than HEICO, as well as complementary lines of business and financial, marketing and other resources that HEICO does not have.  In addition, OEMs, aircraft maintenance providers, leasing companies and FAA-certificated repair facilities may attempt to bundle their services and product offerings in the supply industry, thereby significantly increasing industry competition.  Moreover, our smaller competitors may be able to offer more attractive pricing of parts as a result of lower labor costs or other factors.  A variety of potential actions by any of our competitors, including a reduction of product prices or the establishment by competitors of long-term relationships with new or existing customers, could have a material adverse effect on our business, financial condition and results of operations.  Competition typically intensifies during cyclical downturns in the aviation industry, when supply may exceed demand.  We may not be able to continue to compete effectively against present or future

competitors, and competitive pressures may have a material adverse effect on our business, financial condition and results of operations.

The aviation, defense, space, medical, telecommunications and electronics industries are constantly undergoing development and change and, accordingly, new products, equipment and methods of repair and overhaul service are likely to be introduced in the future.  In addition to manufacturing electronic and electro-optical equipment and selected aerospace and defense components for OEMs and the U.S. government and repairing jet engine and aircraft components, we re-design sophisticated aircraft replacement parts originally developed by OEMs so that we can offer the replacement parts for sale at substantially lower prices than those manufactured by the OEMs.  Consequently, we devote substantial resources to research and product development.  Technological development poses a number of challenges and risks, including the following:

In addition, we may not be able to successfully develop new products, equipment or methods of repair and overhaul service, and the failure to do so could have a material adverse effect on our business, financial condition and results of operations.

A key element of our strategy is growth through the acquisition of additional companies.  Our acquisition strategy is affected by and poses a number of challenges and risks, including the following:

We may not be able to successfully execute our acquisition strategy, and the failure to do so could have a material adverse effect on our business, financial condition and results of operations.

Our business is affected by the availability and price of the raw materials and component parts that we use to manufacture our products.  Our ability to manage inventory and meet delivery requirements may be constrained by our suppliers' ability to adjust delivery of long-lead time products during times of volatile demand.  The supply chains for our business could also be disrupted by external events such as natural disasters, extreme weather events, labor disputes, governmental actions and legislative or regulatory changes.  As a result, our suppliers may fail to perform according to specifications when required and we may be unable to identify alternate suppliers or to otherwise mitigate the consequences of their non-performance.  Transitions to new suppliers may result in significant costs and delays, including those related to the required recertification of parts obtained from new suppliers with our customers and/or regulatory agencies.  Our inability to fill our supply needs could jeopardize our ability to fulfill obligations under customer contracts, which could result in reduced revenues and profits, contract penalties or terminations, and damage to customer relationships.  Further, increased costs of such raw materials or components could reduce our profits if we were unable to pass along such price increases to our customers.

The costs to meet customer specifications and requirements could result in us having to spend more to design or manufacture products and this could reduce our profit margins on

current contracts or those we obtain in the future.

Our jet engine and aircraft component replacement parts and repair and overhaul services expose our business to potential liabilities for personal injury or death as a result of the failure of an aircraft component that we have designed, manufactured or serviced.  While we maintain liability insurance to protect us from future product liability claims, an uninsured or partially insured claim, or a claim for which third-party indemnification is not available, could have a material adverse effect on our business, financial condition and results of operations. Additionally, our customers typically require us to maintain substantial insurance coverage at commercially reasonable rates and our inability to obtain insurance coverage at commercially reasonable rates could have a material adverse effect on our business.

Our operations and facilities are subject to a number of federal, state and local environmental laws and regulations, which govern, among other things, the discharge of hazardous materials into the air and water as well as the handling, storage and disposal of hazardous materials.  Pursuant to various environmental laws, a current or previous owner or operator of real property may be liable for the costs of removal or remediation of hazardous materials.  Environmental laws typically impose liability whether or not the owner or operator knew of, or was responsible for, the presence of hazardous materials.  Although management believes that our operations and facilities are in material compliance with environmental laws and regulations, future changes in them or interpretations thereof or the nature of our operations may require us to make significant additional capital expenditures to ensure compliance in the future.

We carry limited specific environmental insurance, thus, losses could occur for uninsurable or uninsured risks or in amounts in excess of existing insurance coverage. The occurrence of an event that is not covered in full or in part by insurance could have a material adverse effect on our business, financial condition and results of operations.

Several of our facilities, as a result of their locations, could be subject to a catastrophic loss caused by hurricanes, tornadoes, earthquakes, floods, fire, power loss, telecommunication and information systems failure, political unrest or similar events.  Our corporate headquarters and facilities located in Florida are particularly susceptible to hurricanes, storms, tornadoes or other natural disasters that could disrupt our operations, delay production and shipments, and result in large expenses to repair or replace the facility or facilities.  Should insurance or other risk transfer mechanisms, such as our existing disaster recovery and business continuity plans, be insufficient to recover all costs, we could experience a material adverse effect on our business, financial condition and results of operations.

We rely on information technology systems, some of which are managed by third parties, to process, transmit and store electronic information, and to manage or support a variety of critical business processes and activities. We also collect and store sensitive data, including confidential business information and personal data. These systems may be susceptible to damage, disruptions or shutdowns due to attacks by computer hackers, computer viruses, employee error or malfeasance, power outages, hardware failures, telecommunication or utility failures, catastrophes or other unforeseen events. In addition, security breaches of our systems could result in the misappropriation or unauthorized disclosure of confidential information or personal data belonging to us or to our employees, partners, customers or suppliers. Any such events could disrupt our operations, delay production and shipments, result in defective products or services, damage customer relationships and our reputation and result in legal claims or proceedings that could have a material adverse effect on our business, financial condition and results of operations.

We file income tax returns in the U.S. federal jurisdiction, multiple state jurisdictions and certain jurisdictions outside the U.S.  In fiscal 2015, our effective tax rate was 31.7%.  Our future effective tax rate may be adversely affected by a number of factors, including the following:

Any significant increase in our future effective tax rates could have a material adverse effect on net income for future periods.

We have experienced rapid growth in recent periods and intend to continue to pursue an aggressive growth strategy, both through acquisitions and internal expansion of products and services.  Our growth to date has placed, and could continue to place, significant demands on our administrative, operational and financial resources.  We may not be able to grow effectively or manage our growth successfully, and the failure to do so could have a material adverse effect on our business, financial condition and results of operations.

Our success substantially depends on the performance, contributions and expertise of our senior management team led by Laurans A. Mendelson, our Chairman and Chief Executive Officer, and Eric A. Mendelson and Victor H. Mendelson, our Co-Presidents. Technical employees are also critical to our research and product development, as well as our ability to continue to re-design sophisticated products of OEMs in order to sell competing replacement parts at substantially lower prices than those manufactured by the OEMs.  The loss of the services of any of our executive officers or other key employees or our inability to continue to attract or retain the necessary personnel could have a material adverse effect on our business, financial condition and results of operations.

As of December 15, 2015, collectively our executive officers and entities controlled by them, the HEICO Savings and Investment Plan (our 401(k) Plan) and members of the Board of Directors beneficially owned approximately 22% of our outstanding Common Stock and approximately 6% of our outstanding Class A Common Stock.  Accordingly, they will be able to substantially influence the election of the Board of Directors and control our business, policies and affairs, including our position with respect to proposed business combinations and attempted takeovers.

None.

We own or lease a number of facilities, which are utilized by our Flight Support Group ("FSG"), Electronic Technologies Group ("ETG") and corporate offices.  As of October 31, 2015, all of the facilities listed below were in good operating condition, well maintained and in regular use.  We believe that our existing facilities are sufficient to meet our operational needs for the foreseeable future.  Summary information on the facilities utilized within the FSG, ETG and our corporate offices to support their principal operating activities is as follows:

We are involved in various legal actions arising in the normal course of business.  Based upon the Company's and our legal counsel's evaluations of any claims or assessments, management is of the opinion that the outcome of these matters will not have a material effect on our results of operations, financial position or cash flows.

Not applicable.

Our Class A Common Stock and Common Stock are listed and traded on the New York Stock Exchange ("NYSE") under the symbols "HEI.A" and "HEI," respectively.  The following tables set forth, for the periods indicated, the high and low share prices for our Class A Common Stock and our Common Stock as reported on the NYSE, as well as the amount of cash dividends paid per share during such periods.

As of December 15, 2015, there were 373 holders of record of our Class A Common Stock and 371 holders of record of our Common Stock.

The following graph and table compare the total return on $100 invested in HEICO Common Stock and HEICO Class A Common Stock with the total return on $100 invested in the NYSE Composite Index and the Dow Jones U.S. Aerospace Index for the five-year period from October 31, 2010 through October 31, 2015.  The NYSE Composite Index measures the performance of all common stocks listed on the NYSE.  The Dow Jones U.S. Aerospace Index is comprised of large companies which make aircraft, major weapons, radar and other defense equipment and systems as well as providers of satellites and spacecrafts used for defense purposes.  The total returns include the reinvestment of cash dividends.

The following graph and table compare the total return on $100 invested in HEICO Common Stock since October 31, 1990 using the same indices shown on the five-year performance graph above.  October 31, 1990 was the end of the first fiscal year following the

date the current executive management team assumed leadership of the Company.  No Class A Common Stock was outstanding as of October 31, 1990.  As with the five-year performance graph, the total returns include the reinvestment of cash dividends.

We have historically paid semi-annual cash dividends on both our Class A Common Stock and Common Stock. In January 2014, we paid a special and extraordinary $.35 per share cash dividend on both classes of HEICO's common stock. In January and July 2015, we paid our 73 rd and 74 th consecutive semi-annual cash dividend since 1979. The semi-annual cash dividend paid in fiscal 2015 of $.07 per share represents a 17% increase over the prior semi-annual cash dividend amount of $.06 per share paid in fiscal 2014. In December 2015, our Board of Directors declared a regular semi-annual cash dividend of $.08 per share payable in January 2016. This cash dividend represents a 14% increase over the prior semi-annual per share amount of $.07. Our Board of Directors will continue to review our dividend policy and will regularly evaluate whether dividends should be paid in cash or stock, as well as what amounts should be paid. Our ability to pay dividends could be affected by future business performance, liquidity, capital needs, alternative investment opportunities and loan covenants under our revolving credit facility.

There were no purchases of our equity securities during the fourth quarter of fiscal 2015.

There were no unregistered sales of our equity securities during fiscal 2015.

__________________

impairment losses related to the write-down of certain intangible assets at the fiscal 2013 and fiscal 2012 acquisitions to their estimated fair values as well as lower than expected operating income at the fiscal 2013 acquired business, which in aggregate increased net income attributable to HEICO by $10.2 million, or $.15 per basic and diluted share. The reduction in accrued contingent consideration and $13.1 million of the impairment losses were recorded as a component of selling, general and administrative ("SG&A") expenses, while the remaining impairment losses of $1.9 million were recorded as a component of cost of sales.

Our business is comprised of two operating segments, the Flight Support Group ("FSG") and the Electronic Technologies Group ("ETG").

The Flight Support Group consists of HEICO Aerospace Holdings Corp. ("HEICO Aerospace"), which is 80% owned, and HEICO Flight Support Corp., which is wholly owned, and their collective subsidiaries, which primarily:

The Electronic Technologies Group consists of HEICO Electronic Technologies Corp. ("HEICO Electronic") and its subsidiaries, which primarily:

frequency power delivery systems for the commercial sign industry; high voltage power supplies found in satellite communications, CT scanners and in medical and industrial x-ray systems; three-dimensional microelectronic and stacked memory products that are principally integrated into larger subsystems equipping satellites and spacecraft; harsh environment connectivity products and custom molded cable assemblies; RF and microwave amplifiers, transmitters and receivers used to support military communications on unmanned aerial systems, other aircraft, helicopters and ground-based data/communications systems; communications and electronic intercept receivers and tuners for military and intelligence applications; wireless cabin control systems, solid state power distribution and management systems and fuel level sensing systems for business jets and for general aviation, as well as for the military/defense market; and microwave modules, units and integrated sub-systems for commercial and military satellites.

Our results of operations during each of the past three fiscal years have been affected by a number of transactions.  This discussion of our financial condition and results of operations should be read in conjunction with the Consolidated Financial Statements and Notes thereto included herein. For further information regarding the acquisitions discussed below, see Note 2, Acquisitions, of the Notes to Consolidated Financial Statements.  Each acquisition was included in our results of operations from the effective acquisition date.

In August 2015, we acquired, through HEICO Flight Support Corp., all of the stock of Astroseal Products Mfg. Corporation ("Astroseal"). Astroseal manufactures expanded foil mesh, which is integrated into composite aerospace structures for lighting strike protection in fixed and rotary wing aircraft.

In August 2015, we acquired, through HEICO Electronic, 80.1% of the equity of Midwest Microwave Solutions, Inc. ("MMS"). MMS designs, manufactures and sells unique Size, Weight, Power and Cost (SWAP-C) optimized Communications and Electronic Intercept Receivers and Tuners for military and intelligence applications. The remaining 19.9% continues to be owned by certain members of MMS' management team.

In August 2015, we acquired, through HEICO Flight Support Corp., 80.1% of the assets and assumed certain liabilities of Aerospace & Commercial Technologies, LLC ("ACT"). ACT is a leading provider of products and services necessary to maintain up-to-date F-16 fighter aircraft operational capabilities. The remaining 19.9% continues to be owned by certain members of ACT's management team.

In May 2015, we acquired, through HEICO Flight Support Corp, all of the stock of Thermal Energy Products, Inc. ("TEP"). TEP engineers, designs and manufactures removable/reusable insulation systems for industrial, commercial, aerospace and defense applications.

In January 2015, we acquired, through HEICO Flight Support Corp., 80.1% of the equity of Harter Aerospace, LLC ("Harter"). Harter is a globally recognized component and accessory maintenance, repair, and overhaul (MRO) station specializing in commercial aircraft accessories, including thrust reverse actuation systems and pneumatics, and electromechanical components.

The remaining 19.9% interest continues to be owned by certain members of Harter's management team

In January 2015, we acquired, through HEICO Flight Support Corp., 80% of the equity of Aeroworks International Holding B.V. ("Aeroworks"). Aeroworks, which is headquartered in the Netherlands and maintains a significant portion of its production facilities in Thailand and Laos, is a manufacturer of both composite and metal parts used primarily in aircraft interior applications, including seating, galleys, lavatories, doors, and overhead bins. The remaining 20% interest continues to be owned by a certain member of Aeroworks' management team

In June 2014, we acquired, through a subsidiary of HEICO Flight Support Corp., certain assets and liabilities of Quest Aviation Supply, Inc. ("Quest Aviation"). Quest Aviation is a niche supplier of parts to repair thrust reversers on various aircraft engines.

In October 2013, we acquired, through HEICO Electronic, all of the outstanding stock of Lucix Corporation ("Lucix") in a transaction carried out by means of a merger. Lucix is a leading designer and manufacturer of high performance, high reliability microwave modules, units, and integrated sub-systems for commercial and military satellites.

In May 2013, we acquired, through HEICO Flight Support Corp., Reinhold Industries, Inc. ("Reinhold") through the acquisition of all of the outstanding stock of Reinhold's parent company in a transaction carried out by means of a merger. Reinhold is a leading manufacturer of advanced niche components and complex composite assemblies for commercial aviation, defense and space applications.

The purchase price of each of the above referenced acquisitions was paid in cash principally using proceeds from our revolving credit facility. The aggregate amount paid in cash for acquisitions, including additional purchase consideration payments, was $166.8 million, $8.7 million and $222.6 million in fiscal 2015, 2014 and 2013, respectively.

In February 2014, we acquired the 20% noncontrolling interest held by Lufthansa Technik AG ("LHT") in four of our existing subsidiaries principally operating in the specialty products and distribution businesses within HEICO Aerospace. For further information regarding this acquisition, see Note 8, Shareholder's Equity, of the Notes to Consolidated Financial Statements.

We believe that the following are our most critical accounting policies, which require management to make judgments about matters that are inherently uncertain.

Assumptions utilized to determine fair value in connection with business combinations, contingent consideration arrangements and in goodwill and intangible assets impairment tests are highly judgmental.  If there is a material change in such assumptions or if there is a material change in the conditions or circumstances influencing fair value, we could be required to

recognize a material impairment charge.  See Item 1A., Risk Factors, for a list of factors which may cause our actual results to differ materially from anticipated results.

Revenue Recognition

Revenue from the sale of products and the rendering of services is recognized when title and risk of loss passes to the customer, which is generally at the time of shipment.  Revenue from certain fixed price contracts for which costs can be dependably estimated is recognized on the percentage-of-completion method, measured by the percentage of costs incurred to date to estimated total costs for each contract.  This method is used because management considers costs incurred to be the best available measure of progress on these contracts.  Revisions in cost estimates as contracts progress have the effect of increasing or decreasing profits in the period of revision.  Revisions in cost estimates may be caused by factors such as the price or availability of raw materials and component parts or variations in the amount of labor required and/or the materials necessary to meet customer specifications and requirements. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. The percentage of our net sales recognized under the percentage-of-completion method was approximately 4%, 3% and 1% in fiscal 2015, 2014 and 2013, respectively.  Changes in estimates pertaining to percentage-of-completion contracts did not have a material or significant effect on net income or net income per share in fiscal 2015, 2014 and 2013.

For fixed price contracts in which costs cannot be dependably estimated, revenue is recognized on the completed-contract method.  A contract is considered complete when all significant costs have been incurred or the item has been accepted by the customer. Progress billings and customer advances received on fixed price contracts accounted for under the completed-contract method are classified as a reduction to contract costs that are included in inventories, if any, and any remaining amount is included in accrued expenses and other current liabilities.

Valuation of Accounts Receivable

The valuation of accounts receivable requires that we set up an allowance for estimated uncollectible accounts and record a corresponding charge to bad debt expense.  We estimate uncollectible receivables based on such factors as our prior experience, our appraisal of a customer's ability to pay, age of receivables outstanding and economic conditions within and outside of the aviation, defense, space, medical, telecommunications and electronics industries.  Actual bad debt expense could differ from estimates made.

Valuation of Inventory

Inventory is stated at the lower of cost or market, with cost being determined on the first-in, first-out or the average cost basis.  Losses, if any, are recognized fully in the period when identified.

We periodically evaluate the carrying value of inventory, giving consideration to factors such as its physical condition, sales patterns and expected future demand in order to estimate the amount necessary to write down any slow moving, obsolete or damaged inventory.  These estimates could vary significantly from actual amounts based upon future economic conditions, customer inventory levels, or competitive factors that were not foreseen or did not exist when the estimated write-downs were made.

In accordance with industry practice, all inventories are classified as a current asset including portions with long production cycles, some of which may not be realized within one year.

Business Combinations

We allocate the purchase price of acquired entities to the underlying tangible and identifiable intangible assets acquired and liabilities and any noncontrolling interests assumed based on their estimated fair values, with any excess recorded as goodwill.  Determining the fair value of assets acquired and liabilities and noncontrolling interests assumed requires management's judgment and often involves the use of significant estimates and assumptions, including assumptions with respect to future cash inflows and outflows, discount rates, asset lives and market multiples, among other items.  We determine the fair values of intangible assets acquired generally in consultation with third-party valuation advisors.

As part of the agreement to acquire certain subsidiaries, we may be obligated to pay contingent consideration should the acquired entity meet certain earnings objectives subsequent to the date of acquisition. As of the acquisition date, contingent consideration is recorded at fair value as determined through the use of a probability-based scenario analysis approach. Under this method, a set of discrete potential future subsidiary earnings is determined using internal estimates based on various revenue growth rate assumptions for each scenario. A probability of likelihood is then assigned to each discrete potential future earnings estimate and the resultant contingent consideration is calculated and discounted using a weighted average discount rate reflecting the credit risk of a market participant. Subsequent to the acquisition date, the fair value of such contingent consideration is measured each reporting period and any changes are recorded to selling, general and administrative ("SG&A") expenses within our Consolidated Statements of Operations. Changes in either the revenue growth rates, related earnings or the discount rate could result in a material change to the amount of contingent consideration accrued. As of October 31, 2015, 2014 and 2013, $21.4 million, $1.2 million and $29.3 million of contingent consideration was accrued within our Consolidated Balance Sheets, respectively. During fiscal 2015, 2014 and 2013, such fair value measurement adjustments resulted in net increases (or decreases) to SG&A expenses of $.3 million, ($28.1) million and ($1.6) million, respectively. For further information regarding the adjustments above, see Note 7, Fair Value Measurements, of the Notes to Consolidated Financial Statements.

Valuation of Goodwill and Other Intangible Assets

We test goodwill for impairment annually as of October 31, or more frequently if events or changes in circumstances indicate that the carrying amount of goodwill may not be fully recoverable.  In evaluating the recoverability of goodwill, we compare the fair value of each of our reporting units to its carrying value to determine potential impairment.  If the carrying value of a reporting unit exceeds its fair value, the implied fair value of that reporting unit's goodwill is to be calculated and an impairment loss is recognized in the amount by which the carrying value of the reporting unit's goodwill exceeds its implied fair value, if any.  The fair values of our reporting units were determined using a weighted average of a market approach and an income approach.  Under the market approach, fair values are estimated using published market multiples for comparable companies. We calculate fair values under the income approach by taking estimated future cash flows that are based on internal projections and other assumptions deemed reasonable by management and discounting them using an estimated weighted average cost of capital.  Based on the annual goodwill impairment test as of October 31, 2015, 2014 and 2013, we determined there was no impairment of our goodwill.  The fair value of each of our reporting units as of October 31, 2015 significantly exceeded its carrying value.

We test each non-amortizing intangible asset (principally trade names) for impairment annually as of October 31, or more frequently if events or changes in circumstances indicate that the asset might be impaired. To derive the fair value of our trade names, we utilize an income approach, which relies upon management's assumptions of royalty rates, projected revenues and discount rates.  We also test each amortizing intangible asset for impairment if events or circumstances indicate that the asset might be impaired.  The test consists of determining whether the carrying value of such assets will be recovered through undiscounted expected future cash flows.  If the total of the undiscounted future cash flows is less than the carrying amount of those assets, we recognize an impairment loss based on the excess of the carrying amount over the fair value of the assets.  The determination of fair value requires us to make a number of estimates, assumptions and judgments of underlying factors such as projected revenues and related earnings as well as discount rates. Based on the intangible impairment tests conducted, we did not recognize any impairment losses in fiscal 2015 and 2013; however, we recognized pre-tax impairment losses within the ETG during fiscal 2014 related to the write-down of certain customer relationships, non-amortizing trade names, and intellectual property of $11.2 million, $1.9 million and $1.9 million, respectively, to their estimated fair values.  The impairment losses pertaining to customer relationships and non-amortizing trade names were recorded as a component of SG&A expenses in the Company's Consolidated Statement of Operations and the impairment losses pertaining to intellectual property were recorded as a component of cost of sales. For additional information regarding the impairment losses discussed above, including the assumptions made when determining the asset's fair value, see Note 7, Fair Value Measurements, of the Notes to Consolidated Financial Statements.

The following table sets forth the results of our operations, net sales and operating income by segment and the percentage of net sales represented by the respective items in our Consolidated Statements of Operations (in thousands) :

Net Sales

Our net sales in fiscal 2015 increased by 5% to a record $1,188.6 million, as compared to net sales of $1,132.3 million in fiscal 2014. The increase in consolidated net sales reflects an increase of $46.9 million (a 6% increase) to a record $809.7 million in net sales within the FSG as well as an increase of $11.6 million (a 3% increase) to a record $391.0 million in net sales within the ETG. The net sales increase in the FSG reflects net sales of $54.9 million contributed by our fiscal 2015 acquisitions as well as additional net sales in our aftermarket replacement parts and repair and overhaul services product lines of $11.4 million principally from new product and service offerings. The net sales increase within the FSG was partially offset by a $19.4 million organic net sales decrease in our specialty products lines principally reflecting lower net sales of certain industrial products that are attributable to the completion of a customer's multi-year orders in late fiscal 2014. As a result of the net sales decrease of certain industrial products, the FSG experienced a 1% organic revenue decline in fiscal 2015. Excluding the impact of the decline in net industrial sales, the FSG experienced organic growth of 3% in fiscal 2015. The net sales increase in the ETG reflects net sales of $8.0 million contributed by a fiscal 2015 acquisition as well as organic growth of 1% resulting from an aggregate net sales increase of $7.6 million attributed to higher demand for certain of our defense, other electronics and aerospace products. The net sales increase within the ETG was partially offset by a $3.9 million net sales decrease from lower demand for certain of the ETG's space and telecommunications products. Sales price changes were not a significant contributing factor to the FSG and ETG net sales growth in fiscal 2015.

Our net sales in fiscal 2015 and 2014 by market consisted of approximately 57% and 56%, respectively, from the commercial aviation industry, 27% and 26%, respectively, from the defense and space industries, and 16% and 18%, respectively, from other industrial markets including medical, electronics and telecommunications.

Gross Profit and Operating Expenses

Our consolidated gross profit margin increased to 36.5% in fiscal 2015 as compared to 35.2% in fiscal 2014 and principally reflects an increase of 3.8% in the ETG's gross profit margin as well as a .2% increase in the FSG's gross profit margin. The increase in the ETG's gross profit margin is mainly attributed to a more favorable product mix and increased net sales of certain of our defense products. Total new product research and development ("R&D") expenses included within our consolidated cost of sales increased to $38.7 million in fiscal 2015 compared to $37.4 million in fiscal 2014.

Selling, general and administrative ("SG&A") expenses were $204.5 million and $194.9 million in fiscal 2015 and 2014, respectively, and were a constant 17.2% of net sales in both fiscal 2015 and 2014. The increase in SG&A expenses principally reflects a $28.1 million reduction in the estimated fair value of accrued contingent consideration recorded in the prior year associated with a fiscal 2013 acquisition, partially offset by the impact of $13.1 million of

impairment losses recorded in the prior year related to certain intangible assets of the acquired entity and a $5.2 million decrease in performance-based compensation expense. See Note 7, Fair Value Measurements, of the Notes to Consolidated Financial Statements for additional information.

Operating Income

Operating income in fiscal 2015 increased by 13% to a record $229.7 million as compared to operating income of $203.4 million in fiscal 2014. The increase in operating income reflects a $13.3 million increase (a 10% increase) to a record $149.8 million in operating income of the FSG in fiscal 2015, up from $136.5 million in fiscal 2014 and a $9.9 million increase (an 11% increase) in operating income of the ETG to a record $98.8 million in fiscal 2015, up from $88.9 million in fiscal 2014. The increase in operating income of the FSG principally reflects the aforementioned net sales growth, a $2.6 million decrease in performance-based compensation expense, the improved gross profit margin and $1.4 million of unrealized gains from foreign currency transaction adjustments on our Euro denominated contingent consideration liability, partially offset by a $3.2 million increase in amortization expense of intangible assets recognized in connection with the fiscal 2015 acquired businesses. The increase in operating income of the ETG principally reflects the previously mentioned improved gross profit margin and net sales growth, a $15.0 million impact from prior year intangible asset impairment losses and a $4.0 million decrease in amortization expense of intangible assets, partially offset by the impact of the prior year reduction in the estimated fair value of accrued contingent consideration. Additionally, the increase in consolidated operating income reflects a $3.3 million decrease in corporate expenses principally due to $2.3 million of unrealized gains from foreign currency transaction adjustments on Euro borrowings and lower performance-based compensation expense.

Consolidated operating income as a percentage of net sales increased to 19.3% in fiscal 2015, up from 18.0% in fiscal 2014. The increase in consolidated operating income as a percentage of net sales is mainly attributed to an increase in the ETG's operating income as a percentage of net sales to 25.3% in fiscal 2015, up from 23.4% in fiscal 2014 and an increase in the FSG's operating income as a percentage of net sales to 18.5% in fiscal 2015, up from 17.9% in fiscal 2014. The increase in operating income as a percentage of net sales for the ETG principally reflects the improved gross profit margin and a 4.0% and a 1.2% favorable impact from the prior year impairment losses and current year lower amortization expense of intangible assets, respectively, partially offset by a 7.4% impact from the prior year reduction in the estimated fair value of accrued contingent consideration. The increase in operating income as a percentage of net sales for the FSG principally reflects a .3% favorable impact from the lower performance-based compensation expense as well as the improved gross profit margin and unrealized foreign currency gains, partially offset by the increase in amortization expense associated with fiscal 2015 acquired intangible assets.

Interest Expense

Interest expense decreased to $4.6 million in fiscal 2015 from $5.4 million in fiscal 2014.

The decrease was principally due to a higher weighted average balance outstanding under our revolving credit facility in fiscal 2014 associated with our fiscal 2013 acquisitions and the acquisition of certain noncontrolling interests in fiscal 2014.

Other (Expense) Income

Other (expense) income in fiscal 2015 and 2014 was not material.

Income Tax Expense

Our effective tax rate in fiscal 2015 increased to 31.7% from 30.1% in fiscal 2014. The increase is principally due to the impact of a larger nontaxable reduction in accrued contingent consideration during fiscal 2014 associated with a prior year acquisition acquired by means of a stock transaction and the impact of higher tax-exempt unrealized gains in the cash surrender values of life insurance policies related to the HEICO Corporation Leadership Compensation Plan ("LCP") in fiscal 2014 compared to fiscal 2015. These increases were partially offset by an income tax credit for qualified R&D activities for the last ten months of fiscal 2014 that was recognized in the first quarter of fiscal 2015 resulting from the retroactive extension of the U.S. federal R&D tax credit in December 2014 to cover calendar year 2014, the benefit of recognizing additional foreign tax credits related to R&D activities at one of our foreign subsidiaries inclusive of amendments to prior year tax returns, and our decision to not make a provision for U.S. income taxes on the undistributed earnings of a fiscal 2015 foreign acquisition. See Note 6, Income Taxes, of the Notes to Consolidated Financial Statements for a detailed analysis of the provision for income taxes.

Net Income Attributable to Noncontrolling Interests

Net income attributable to noncontrolling interests relates to the 20% noncontrolling interest held by Lufthansa Technik AG in HEICO Aerospace and the noncontrolling interests held by others in certain subsidiaries of the FSG and ETG. Net income attributable to noncontrolling interests was $20.2 million in fiscal 2015 compared to $17.5 million in fiscal 2014. The increase principally reflects the impact of net income allocations to certain of the fiscal 2015 acquisitions in which noncontrolling interests are held.     

Net Income Attributable to HEICO

Net income attributable to HEICO increased to a record $133.4 million, or $1.97 per diluted share, in fiscal 2015 from $121.3 million, or $1.80 per diluted share, in fiscal 2014, principally reflecting the previously mentioned increased operating income.

Outlook

As we look ahead to fiscal 2016, we anticipate net sales growth within the FSG's product lines that serve the commercial aviation and defense markets and for certain of our industrial products within our specialty products lines. We also expect growth within the ETG compared

to fiscal 2015, principally driven by demand for the majority of our products moderated by lower demand for certain of our space related products. During fiscal 2016, we will continue our commitments to developing new products and services, further market penetration, and an aggressive acquisition strategy while maintaining our financial strength and flexibility. Overall, we are targeting growth in fiscal 2016 full year net sales and net income over fiscal 2015 levels.

Net Sales

Our net sales in fiscal 2014 increased by 12% to a record $1,132.3 million, as compared to net sales of $1,008.8 million in fiscal 2013. The increase in net sales principally reflects an increase of $97.7 million (a 15% increase) to a record $762.8 million in net sales within the FSG as well as an increase of $29.4 million (an 8% increase) to a record $379.4 million in net sales within the ETG. The net sales increase in the FSG reflects organic growth of approximately 9% as well as additional net sales of $37.7 million from a fiscal 2013 acquisition. The organic growth in the FSG principally reflects new product offerings and favorable market conditions resulting in net sales increases of $58.6 million within our aftermarket replacement parts and repair and overhaul services product lines. The net sales increase in the ETG resulted from additional net sales of $23.5 million from a fiscal 2013 acquisition as well as organic growth of approximately 2%. The organic growth in the ETG principally reflects an increase in demand for certain space and aerospace products resulting in a $7.5 million and $2.1 million increase in net sales, respectively, partially offset by a decrease in demand for certain defense products resulting in a decrease in net sales of $3.4 million. Sales price changes were not a significant contributing factor to the FSG and ETG net sales growth in fiscal 2014.

Our net sales in fiscal 2014 and 2013 by market consisted of approximately 56% and 54%, respectively, from the commercial aviation industry, 26% and 26%, respectively, from the defense and space industries, and 18% and 20%, respectively, from other industrial markets including medical, electronics and telecommunications.

Gross Profit and Operating Expenses

Our consolidated gross profit margin decreased to 35.2% in fiscal 2014 as compared to 36.8% in fiscal 2013 principally reflecting a decrease of 4.2% in the ETG's gross profit margin. The decrease in the ETG's gross profit margin is mainly attributed to a less favorable product mix for certain of our space and defense products inclusive of the impact of the fiscal 2013 acquisition as well as a .5% impact from an impairment loss related to the write-down of a certain intangible asset to its estimated fair value. Total new product research and development expenses included within our consolidated cost of sales increased to $37.4 million in fiscal 2014 compared to $32.9 million in fiscal 2013.

SG&A expenses were $194.9 million and $187.6 million in fiscal 2014 and 2013, respectively.  The increase in SG&A expenses is principally attributable to additional costs to support the higher net sales volumes. During fiscal 2014, SG&A expenses were reduced by

$15.0 million from the net impact of a $28.1 million decrease in the estimated fair value of accrued contingent consideration associated with the fiscal 2013 and a fiscal 2012 acquisition of the ETG that was partially offset by $13.1 million of impairment losses related to the write-down of certain intangible assets of the acquired entities to their estimated fair values.  The reductions in accrued contingent consideration and impairment losses were principally due to less favorable projected market conditions for certain of the acquired entities' space and defense products. See Note 7, Fair Value Measurements, of the Notes to Consolidated Financial Statements for additional information regarding the contingent consideration arrangements and valuations thereof as well as further information pertaining to the measurement and recognition of the impairment losses associated with intangible assets.

SG&A expenses as a percentage of net sales decreased from 18.6% in fiscal 2013 to 17.2% in fiscal 2014 principally reflecting the previously mentioned net impact of fair value adjustments to accrued contingent consideration and intangible asset impairment losses.

Operating Income

Operating income in fiscal 2014 increased by 11% to a record $203.4 million as compared to operating income of $183.6 million in fiscal 2013. The increase in operating income reflects a $14.4 million increase (a 12% increase) to a record $136.5 million in operating income of the FSG in fiscal 2014, up from $122.1 million in fiscal 2013 and a $5.8 million increase (a 7% increase) in operating income of the ETG to a record $88.9 million in fiscal 2014, up from $83.1 million in fiscal 2013. The increase in operating income of the FSG is principally attributed to the previously mentioned net sales growth. The increase in operating income of the ETG is attributable to the previously mentioned organic net sales growth and reductions in accrued contingent consideration partially offset by the less favorable product mix, impairment losses and lower than expected operating income from the fiscal 2013 acquisition.

Our consolidated operating income as a percentage of net sales decreased to 18.0% in fiscal 2014 from 18.2% in fiscal 2013. The decrease in consolidated operating income as a percentage of net sales reflects a reduction in the FSG's operating income as a percentage of net sales from 18.4% in fiscal 2013 to 17.9% in fiscal 2014 and a reduction in the ETG's operating income as a percentage of net sales from 23.7% in fiscal 2013 to 23.4% in fiscal 2014. The decrease in the FSG's operating income as a percentage of net sales principally reflects a slightly lower gross profit margin as well as increases in certain SG&A expenses to support the higher net sales volumes. The decrease in the ETG's operating income as a percentage of net sales is primarily attributed to the previously mentioned lower gross profit margin and impairment losses partially offset by the reductions in accrued contingent consideration.

Interest Expense

Interest expense increased to $5.4 million in fiscal 2014 from $3.7 million in fiscal 2013. The increase was principally due to a higher weighted average balance outstanding under our revolving credit facility in fiscal 2014 associated with the fiscal 2013 acquisitions and the acquisition of certain noncontrolling interests during fiscal 2014.

Other Income

Other income in fiscal 2014 and 2013 was not material.

Income Tax Expense

Our effective tax rate in fiscal 2014 decreased to 30.1% from 31.1% in fiscal 2013. The decrease is principally attributed to the impact of a nontaxable reduction in accrued contingent consideration during fiscal 2014 associated with a fiscal 2013 acquisition acquired by means of a stock transaction. This decrease was partially offset by lower U.S. federal R&D tax credits recognized in fiscal 2014 due to the expiration of the U.S. federal R&D tax credit in December 2013 compared to fiscal 2013 during which the retroactive extension of the U.S. federal R&D tax credit in the first quarter resulted in twenty-two months of U.S. federal R&D tax credits recognized that year. Additionally, the decrease in the effective rate was partially offset by the impact of higher tax-exempt unrealized gains in the cash surrender values of life insurance policies related to the LCP in fiscal 2013 compared to fiscal 2014. For a detailed analysis of the provision for income taxes, see Note 6, Income Taxes, of the Notes to Consolidated Financial Statements.

Net Income Attributable to Noncontrolling Interests

Net income attributable to noncontrolling interests relates to the 20% noncontrolling interest held by Lufthansa Technik AG in HEICO Aerospace and the noncontrolling interests held by others in certain subsidiaries of the FSG and ETG. Net income attributable to noncontrolling interests was $17.5 million in fiscal 2014 compared to $22.2 million in fiscal 2013. The decrease principally reflects lower allocations of net income to noncontrolling interests in fiscal 2014 due to the acquisition of certain noncontrolling interests during fiscal 2014.     

Net Income Attributable to HEICO

Net income attributable to HEICO increased to a record $121.3 million, or $1.80 per diluted share, in fiscal 2014 from $102.4 million, or $1.53 per diluted share, in fiscal 2013, principally reflecting the previously mentioned increased operating income, lower allocation of net income to noncontrolling interests and the lower effective tax rate.

We have generally experienced increases in our costs of labor, materials and services consistent with overall rates of inflation.  The impact of such increases on net income attributable to HEICO has been generally minimized by efforts to lower costs through manufacturing efficiencies and cost reductions.

Our principal uses of cash include acquisitions, capital expenditures, cash dividends, distributions to noncontrolling interests and working capital needs. Capital expenditures in fiscal 2016 are anticipated to approximate $30 million. We finance our activities primarily from our operating and financing activities, including borrowings under our revolving credit facility.

As of December 15, 2015, we had approximately $440 million of unused committed availability under the terms of our revolving credit facility. Based on our current outlook, we believe that net cash provided by operating activities and available borrowings under our revolving credit facility will be sufficient to fund our cash requirements for at least the next twelve months.

Operating Activities

Net cash provided by operating activities was $172.9 million in fiscal 2015 and consisted primarily of net income from consolidated operations of $153.6 million, depreciation and amortization expense of $47.9 million (a non-cash item) and a decrease in working capital (current assets minus current liabilities) of $28.7 million. Net cash provided by operating activities decreased by $17.8 million in fiscal 2015 from $190.7 million in fiscal 2014. The decrease in net cash provided by operating activities in fiscal 2015 is principally due to a $44.7 million increase in working capital and a $15.0 million decrease attributed to the impairment of intangible assets recorded in the prior year (a non-cash item), partially offset by a $28.4 million impact from a larger reduction in the estimated fair value of accrued contingent consideration (a non-cash item) recorded in the prior year and an increase of $14.8 million in net income from consolidated operations. The $44.7 million increase in working capital principally reflects a $29.6 million increase in accounts receivable reflecting strong sales late in the fourth quarter of fiscal 2015 and a $10.3 million increase in inventory to meet increased sales demand in the near term.

Net cash provided by operating activities was $190.7 million in fiscal 2014 and consisted primarily of net income from consolidated operations of $138.8 million, depreciation and

amortization expense of $47.8 million, a decrease in working capital of $16.0 million and impairment of intangible assets totaling $15.0 million (a non-cash item), partially offset by a $28.1 million decrease in accrued contingent consideration (a non-cash item) associated with prior year acquisitions. Net cash provided by operating activities increased by $58.9 million in fiscal 2014 from $131.8 million in fiscal 2013. The increase in net cash provided by operating activities in fiscal 2014 is principally due to a $47.0 million decrease in working capital and increases of $15.0 million, $14.2 million and $11.0 million in impairment of intangible assets, net income from consolidated operations and depreciation and amortization expense, respectively, partially offset by a $26.5 million decrease in accrued contingent consideration associated with a fiscal 2013 and a fiscal 2012 acquisition. The $47.0 million decrease in working capital principally reflects a $23.6 million decrease in accounts receivable due to improved timeliness of cash collections and a $15.0 million decrease in inventories resulting from more efficient inventory management at our subsidiaries.

Net cash provided by operating activities was $131.8 million in fiscal 2013 and consisted primarily of net income from consolidated operations of $124.6 million and depreciation and amortization expense of $36.8 million, partially offset by an increase in working capital of $30.9 million. The increase in working capital was principally attributed to increases in accounts receivable and inventory as a result of net sales growth during the period.

Investing Activities

Net cash used in investing activities during the three-year fiscal period ended October 31, 2015 primarily relates to several acquisitions aggregating $398.1 million, including $166.8 million in fiscal 2015, $8.7 million in fiscal 2014, and $222.6 million in fiscal 2013.  Further details on acquisitions may be found at the beginning of this Item 7 under the caption "Overview" and Note 2, Acquisitions, of the Notes to Consolidated Financial Statements.  Capital expenditures aggregated $53.0 million over the last three fiscal years, primarily reflecting the expansion, replacement and betterment of existing production facilities and capabilities, which were generally funded using cash provided by operating activities.

Financing Activities

Net cash provided by financing activities was $27.3 million in fiscal 2015 as compared to net cash used in financing activities of $160.1 million in fiscal 2014 and net cash provided by financing activities of $103.2 million in fiscal 2013. During the three-year fiscal period ended October 31, 2015, we borrowed an aggregate $657.7 million under our revolving credit facility including borrowings of $173.7 million in fiscal 2015, $112.0 million in fiscal 2014, and $372.0 million in fiscal 2013. The aforementioned borrowings were made principally to fund acquisitions, pay special and extraordinary cash dividends in fiscal 2014 and 2013, and make distributions to noncontrolling interests. Further details on acquisitions may be found at the beginning of this Item 7 under the caption "Overview" and Note 2, Acquisitions, of the Notes to Consolidated Financial Statements. Payments on our revolving credit facility aggregated $417.0 million over the last three fiscal years, including $132.0 million in fiscal 2015, $159.0 million in fiscal 2014, and $126.0 million in fiscal 2013. For the three-year fiscal period ended October 31,

2015, we paid an aggregate $160.9 million in cash dividends, including $9.3 million in fiscal 2015, $31.2 million in fiscal 2014, and $120.4 million in fiscal 2013 and we also made distributions to noncontrolling interests aggregating $96.5 million and acquired certain noncontrolling interests aggregating $17.9 million.

In December 2011, we entered into a $670 million Revolving Credit Agreement ("Credit Facility") with a bank syndicate. The Credit Facility may be used for our working capital and general corporate needs, including capital expenditures and to finance acquisitions. In November 2013, we entered into an amendment to extend the maturity date of the Credit Facility by one year to December 2018 and to increase the aggregate principal amount to $800 million. Furthermore, the amendment includes a feature that will allow us to increase the aggregate principal amount by an additional $200 million to become a $1.0 billion facility through increased commitments from existing lenders or the addition of new lenders.

Advances under the Credit Facility accrue interest at our choice of the "Base Rate" or the London Interbank Offered Rate ("LIBOR") plus the applicable margin (based on our ratio of total funded debt to earnings before interest, taxes, depreciation and amortization, noncontrolling interests and non-cash charges, or "leverage ratio"). The Base Rate is the highest of (i) the Prime Rate; (ii) the Federal Funds rate plus .50% per annum; and (iii) the Adjusted LIBO Rate determined on a daily basis for an Interest Period of one month plus 1.00% per annum, as such capitalized terms are defined in the Credit Facility. The applicable margin for a LIBOR-based borrowing ranges from .75% to 2.25%. The applicable margin for a Base Rate borrowing ranges from 0% to 1.25%. A fee is charged on the amount of the unused commitment ranging from .125% to .35% (depending on our leverage ratio). The Credit Facility also includes a $50 million sublimit for borrowings made in foreign currencies, letters of credit and swingline borrowings. Outstanding principal, accrued and unpaid interest and other amounts payable under the Credit Facility may be accelerated upon an event of default, as such events are described in the Credit Facility. The Credit Facility is unsecured and contains covenants that restrict the amount of certain payments, including dividends, and require, among other things, the maintenance of a total leverage ratio, a senior leverage ratio and a fixed charge coverage ratio. In the event our leverage ratio exceeds a specified level, the Credit Facility would become secured by the capital stock owned in substantially all of our subsidiaries. As of October 31, 2015, we were in compliance with all financial and nonfinancial covenants. See Note 5, Long-Term Debt, of the Notes to Consolidated Financial Statements for further information regarding the Credit Facility.

The following table summarizes our contractual obligations as of October 31, 2015 (in thousands):

__________________

Guarantees

As of October 31, 2015, we have arranged for standby letters of credit aggregating $2.7 million, which are supported by our revolving credit facility. One letter of credit in the amount of $1.5 million is to satisfy the security requirement of our insurance company for potential workers' compensation claims and the remainder pertain to performance guarantees related to customer contracts entered into by certain of our subsidiaries.

In March 2013, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update ("ASU") 2013-05, "Parent's Accounting for the Cumulative Translation Adjustment upon Derecognition of Certain Subsidiaries or Groups of Assets within a Foreign Entity or of an Investment in a Foreign Entity," which clarifies the applicable guidance for the release of any cumulative translation adjustments into net earnings. ASU 2013-05 specifies that the entire amount of cumulative translation adjustments should be released into earnings when an entity ceases to have a controlling financial interest in a subsidiary or group of assets within a consolidated foreign entity and the sale or transfer results in the complete or substantially complete liquidation of the investment in the foreign entity. We adopted ASU 2013-05 in the first quarter of fiscal 2015, resulting in no impact to our consolidated results of operations, financial position or cash flows.

In May 2014, the FASB issued ASU 2014-09, "Revenue from Contracts with Customers," which provides a comprehensive new revenue recognition model that will supersede nearly all existing revenue recognition guidance. Under ASU 2014-09, an entity will recognize revenue when it transfers promised goods or services to a customer at an amount that reflects the consideration it expects to receive in exchange for those goods or services. The guidance also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts. In August 2015, the FASB issued ASU 2015-14 which defers the effective date of ASU 2014-09 by one year. Accordingly, ASU 2014-09 is effective for fiscal years and interim reporting periods within those years beginning after December 15, 2017, or in fiscal 2019 for HEICO. Early adoption in the year preceding the effective date is permitted. ASU 2014-09 shall be applied either retrospectively to each prior reporting period presented or retrospectively with the cumulative effect of initially applying ASU 2014-09 recognized at the date of initial application. We are currently evaluating which transition method we will elect and the effect the adoption of this guidance will have on our consolidated results of operations, financial position and cash flows.

In July 2015, the FASB issued ASU 2015-11, "Simplifying the Measurement of Inventory," which requires entities to measure inventories at the lower of cost or net realizable value. Under current guidance, inventories are measured at the lower of cost or market. ASU 2015-11 must be applied prospectively and is effective for fiscal years and interim reporting periods within those years beginning after December 15, 2016, or in fiscal 2018 for HEICO. Early adoption is permitted. We are currently evaluating the effect, if any, the adoption of this guidance will have on our consolidated results of operations, financial position and cash flows.

In September 2015, the FASB issued ASU 2015-16, "Simplifying the Accounting for Measurement-Period Adjustments," which requires that an acquirer recognize adjustments to provisional amounts that are identified during the measurement period in the reporting period in which the adjustment amounts are determined, including any cumulative effect on earnings as a result of the change to the provisional amounts as if the accounting had been completed as of the acquisition date. We adopted ASU 2015-16 in the fourth quarter of fiscal 2015, resulting in no impact on our consolidated results of operations, financial position or cash flows.

In November 2015, the FASB issued ASU 2015-17, "Balance Sheet Classification of Deferred Taxes," which requires that all deferred tax assets and liabilities be classified as noncurrent in the balance sheet. ASU 2015-17 may be applied either prospectively or retrospectively and is effective for fiscal years and interim reporting periods within those years beginning after December 15, 2016, or in fiscal 2018 for HEICO. Early adoption is permitted. We are currently evaluating which transition method we will elect. The adoption of this guidance will only effect the presentation of deferred taxes in our consolidated statement of financial position.

Certain statements in this report constitute "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. All statements contained herein that are not clearly historical in nature may be forward-looking and the words "expect," "anticipate," "believe," "estimate" and similar expressions are generally intended to identify forward-looking statements. Any forward-looking statement contained herein, in press releases, written statements or other documents filed with the Securities and Exchange Commission or in communications and discussions with investors and analysts in the normal course of business through meetings, phone calls and conference calls, concerning our operations, economic performance and financial condition are subject to risks, uncertainties and contingencies. We have based these forward-looking statements on our current expectations and projections about future events. All forward-looking statements involve risks and uncertainties, many of which are beyond our control, which may cause actual results, performance or achievements to differ materially from anticipated results, performance or achievements. Also, forward-looking statements are based upon management's estimates of fair values and of future costs, using currently available information. Therefore, actual results may differ materially from those expressed in or implied by those forward-looking statements. Factors that could cause such differences include:

For further information on these and other factors that potentially could materially affect our financial results, see Item 1A, Risk Factors.  We undertake no obligation to publicly update or revise any forward-looking statement, whether as a result of new information, future events or otherwise, except to the extent required by applicable law.

We have exposure to interest rate risk, mainly related to our revolving credit facility, which has variable interest rates.  Interest rate risk associated with our variable rate debt is the potential increase in interest expense from an increase in interest rates.  Based on our aggregate outstanding variable rate debt balance of $365.2 million as of October 31, 2015, a hypothetical 10% increase in interest rates would not have a material effect on our results of operations, financial position or cash flows. We also maintain a portion of our cash and cash equivalents in financial instruments with original maturities of three months or less.  These financial instruments are subject to interest rate risk and will decline in value if interest rates increase.  Due to the short duration of these financial instruments, a hypothetical 10% increase in interest rates as of October 31, 2015 would not have a material effect on our results of operations, financial position or cash flows.

We have a few foreign subsidiaries that conduct a portion of their operations in currencies other than the U.S. dollar, or principally in Euros, Canadian dollars and British pounds sterling. Accordingly, changes in exchange rates between such foreign currencies and the U.S. dollar will affect the translation of the financial results of our foreign subsidiaries into the U.S. dollar for purposes of reporting our consolidated financial results. A hypothetical 10% weakening in the exchange rate of the Euro, Canadian dollar or British pound sterling to the U.S. dollar as of October 31, 2015 would not have a material effect on our results of operations, financial position or cash flows.

Additionally, we have exposure to foreign currency exchange rate fluctuations on the U.S. dollar value of our foreign currency denominated transactions. During fiscal 2015, we borrowed €32 million under our revolving credit facility and used the funds to facilitate an acquisition. A portion of the total consideration for this acquisition is contingently payable upon the acquired entity meeting certain earnings objectives during each of the first four years following the acquisition. As of October 31, 2015, the estimated fair value of the contingent

consideration was €19.5 million and our Euro debt balance, net of cash, was €29.1 million. A hypothetical 10% weakening of the U.S. dollar relative to the Euro as of October 31, 2015 would increase the U.S. dollar equivalent of our net Euro borrowing and Euro denominated contingent consideration liability by $5.3 million in aggregate and decrease operating income by the same amount.

To the Board of Directors and Shareholders of

HEICO Corporation

Hollywood, Florida

We have audited the accompanying consolidated balance sheets of HEICO Corporation and subsidiaries (the "Company") as of October 31, 2015 and 2014, and the related consolidated statements of operations, comprehensive income, shareholders' equity, and cash flows for each of the three years in the period ended October 31, 2015. Our audits also included the financial statement schedule listed in the Index at Item 15. These financial statements and financial statement schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on the financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of HEICO Corporation and subsidiaries as of October 31, 2015 and 2014, and the results of their operations and their cash flows for each of the three years in the period ended October 31, 2015, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company's internal control over financial reporting as of October 31, 2015, based on the criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated December 17, 2015 expressed an unqualified opinion on the Company's internal control over financial reporting.

/s/ DELOITTE & TOUCHE LLP

Certified Public Accountants

Miami, Florida

December 17, 2015

The accompanying notes are an integral part of these consolidated financial statements.