Heico Corp (HEI) SEC Annual Report (10-K) for 2013

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Commission file number 1-4604

(Exact name of registrant as specified in its charter)

Registrant's telephone number, including area code: (954) 987-4000

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

Rights to Purchase Series B Junior Participating Preferred Stock

Rights to Purchase Series C Junior Participating Preferred Stock

( Title of class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ý No o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No ý

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ý No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

Large accelerated filer ý Accelerated filer o Non-accelerated filer o Smaller reporting company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes o No ý

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant was $1,841,542,000 based on the closing price of HEICO Common Stock and Class A Common Stock as of April 30, 2013 as reported by the New York Stock Exchange.

DOCUMENTS INCORPORATED BY REFERENCE

HEICO Corporation through its subsidiaries (collectively, "HEICO," "we," "us," "our" or the "Company") believes it is the world's largest manufacturer of Federal Aviation Administration ("FAA")-approved jet engine and aircraft component replacement parts, other than the original equipment manufacturers ("OEMs") and their subcontractors.  HEICO also believes it is a leading manufacturer of various types of electronic equipment for the aviation, defense, space, industrial, medical, telecommunications and electronics industries.

The Company was originally organized in 1957 as a holding company known as HEICO Corporation.  As part of a reorganization completed in 1993, the original holding company (formerly known as HEICO Corporation) was renamed as HEICO Aerospace Corporation and a new holding corporation known as HEICO Corporation was created.  The reorganization did not result in any change in the business of the Company, its consolidated assets or liabilities or the relative interests of its shareholders.

Our business is comprised of two operating segments:

The Flight Support Group . Our Flight Support Group ("FSG"), consisting of HEICO Aerospace Holdings Corp. ("HEICO Aerospace") and HEICO Flight Support Corp. and their collective subsidiaries, accounted for 66%, 63% and 70% of our net sales in fiscal 2013, 2012 and 2011, respectively.  The Flight Support Group uses proprietary technology to design and manufacture jet engine and aircraft component replacement parts for sale at lower prices than those manufactured by OEMs.  These parts are approved by the FAA and are the functional equivalent of parts sold by OEMs.  In addition, the Flight Support Group repairs, overhauls and distributes jet engine and aircraft components, avionics and instruments for domestic and foreign commercial air carriers and aircraft repair companies as well as military and business aircraft operators; and manufactures thermal insulation products, complex composite assemblies and other component parts primarily for aerospace, defense, industrial and commercial applications.

The Electronic Technologies Group . Our Electronic Technologies Group ("ETG"), consisting of HEICO Electronic Technologies Corp. and its subsidiaries, accounted for 34%, 37% and 30% of our net sales in fiscal 2013, 2012 and 2011, respectively.  Through our Electronic Technologies Group, which derived approximately 52%, 51% and 56% of its sales in fiscal 2013, 2012 and 2011, respectively, from the sale of products and services to U.S. and foreign military agencies, prime defense contractors and both commercial and defense satellite and spacecraft manufacturers, we design, manufacture and sell various types of electronic, microwave and electro-optical products, including infrared simulation and test equipment, laser rangefinder receivers, electrical power supplies, back-up power supplies, power conversion products, underwater locator beacons, electromagnetic interference and radio frequency interference shielding, high power capacitor charging power supplies, amplifiers, traveling wave

tube amplifiers, photodetectors, amplifier modules, microwave power modules, flash lamp drivers, laser diode drivers, arc lamp power supplies, custom power supply designs, cable assemblies, high voltage power supplies, high voltage interconnection devices and wire, high voltage energy generators, high frequency power delivery systems, three-dimensional microelectronic and stacked memory products, harsh environment electronic connectors and other interconnect products, RF and microwave amplifiers, transmitters and receivers, wireless cabin control systems, solid state power distribution and management systems, fuel level sensing systems and high-speed interface products that link devices such as telemetry receivers, digital cameras, high resolution scanners, simulation systems and test systems to almost any computer.

HEICO has continuously operated in the aerospace industry for more than 50 years. Since assuming control in 1990, our current management has achieved significant sales and profit growth through a broadened line of product offerings, an expanded customer base, increased research and development expenditures and the completion of a number of acquisitions.  As a result of internal growth and acquisitions, our net sales from continuing operations have grown from $26.2 million in fiscal 1990 to $1,008.8 million in fiscal 2013, a compound annual growth rate of approximately 17%.  During the same period, we improved our net income from $2.0 million to $102.4 million, representing a compound annual growth rate of approximately 19%.

Acquisitions have been an important element of our growth strategy over the past twenty-three years, supplementing our organic growth.  Since 1990, we have completed more than 45 acquisitions complementing the niche segments within which we operate of the aviation, defense, space, medical, telecommunications and electronics industries.  We typically target acquisition opportunities that allow us to broaden our product offerings, services and technologies while expanding our customer base and geographic presence.  Even though we have historically pursued an active acquisition policy, our disciplined acquisition strategy involves limiting acquisition candidates to businesses that we believe will continue to grow, offer strong earnings and cash flow potential, and are available at fair prices. See Note 2, Acquisitions, of the Notes to Consolidated Financial Statements for further information regarding our recent acquisitions.

The Flight Support Group, headquartered in Hollywood, Florida, serves a broad spectrum of the aviation industry, including (i) commercial airlines and air cargo carriers; (ii) repair and overhaul facilities; (iii) OEMs; and (iv) U.S. and foreign governments.

The Flight Support Group competes with the leading industry OEMs and, to a lesser extent, with a number of smaller, independent parts distributors.  Historically, the three principal jet engine OEMs, General Electric (including CFM International), Pratt & Whitney and Rolls Royce, have been the sole source of substantially all jet engine replacement parts for their jet engines.  Other OEMs have been the sole source of replacement parts for their aircraft

component parts.  While we believe that we currently supply less than 2% of the market for jet engine and aircraft component replacement parts, we have in recent years been adding new products to our line at a rate of approximately 300 to 500 Parts Manufacturer Approvals ("PMA" or "PMAs") per year.  We currently offer to our customers over 6,000 parts for which PMAs have been received from the FAA.

Jet engine and aircraft component replacement parts can be categorized by their ongoing ability to be repaired and returned to service.  The general categories in which we participate are as follows: (i) rotable; (ii) repairable; and (iii) expendable.  A rotable is a part which is removed periodically as dictated by an operator's maintenance procedures or on an as needed basis and is typically repaired or overhauled and re-used an indefinite number of times.  An important subset of rotables is "life limited" parts.  A life limited rotable has a designated number of allowable flight hours and/or cycles (one take-off and landing generally constitutes one cycle) after which it is rendered unusable.  A repairable is similar to a rotable except that it can only be repaired a limited number of times before it must be discarded.  An expendable is generally a part which is used and not thereafter repaired for further use.

Jet engine and aircraft component replacement parts are classified within the industry as (i) factory-new; (ii) new surplus; (iii) overhauled; (iv) repairable; and (v) as removed.  A factory-new or new surplus part is one that has never been installed or used.  Factory-new parts are purchased from FAA-approved manufacturers (such as HEICO or OEMs) or their authorized distributors.  New surplus parts are purchased from excess stock of airlines, repair facilities or other redistributors.  An overhauled part is one that has been completely repaired and inspected by a licensed repair facility such as ours.  An aircraft spare part is classified as "repairable" if it can be repaired by a licensed repair facility under applicable regulations.  A part may also be classified as "repairable" if it can be removed by the operator from an aircraft or jet engine while operating under an approved maintenance program and is airworthy and meets any manufacturer or time and cycle restrictions applicable to the part.  A "factory-new," "new surplus" or "overhauled" part designation indicates that the part can be immediately utilized on an aircraft.  A part in "as removed" or "repairable" condition requires inspection and possibly functional testing, repair or overhaul by a licensed facility prior to being returned to service in an aircraft.

Factory-New Jet Engine and Aircraft Component Replacement Parts .  The Flight Support Group engages in the research and development, design, manufacture and sale of FAA-approved replacement parts that are sold to domestic and foreign commercial air carriers and aircraft repair and overhaul companies.  Our principal competitors are aircraft engine and aircraft component manufacturers.  The Flight Support Group's factory-new replacement parts include various jet engine and aircraft component replacement parts.  A key element of our growth strategy is the continued design and development of an increasing number of PMA replacement parts in order to further penetrate our existing customer base and obtain new customers.  We select the jet engine and aircraft component replacement parts to design and manufacture through a selection process which analyzes industry information to determine which replacement parts are suitable candidates.

Repair and Overhaul Services .  The Flight Support Group provides repair and overhaul services on selected jet engine and aircraft component parts, as well as on avionics, instruments, composites and flight surfaces of commercial aircraft operated by domestic and foreign commercial airlines.  The Flight Support Group also provides repair and overhaul services including avionics and navigation systems as well as subcomponents and other instruments utilized on military aircraft operated by the United States government and foreign military agencies and for aircraft repair and overhaul companies.  Our repair and overhaul operations require a high level of expertise, advanced technology and sophisticated equipment.  Services include the repair, refurbishment and overhaul of numerous accessories and parts mounted on gas turbine engines and airframes.  Components overhauled include fuel pumps, generators, fuel controls, pneumatic valves, starters and actuators, turbo compressors and constant speed drives, hydraulic pumps, valves and actuators, composite flight controls, electro-mechanical equipment and auxiliary power unit accessories.  Some of the repair and overhaul services provided by the Flight Support Group are proprietary repairs approved by an FAA-qualified designated engineering representative ("DER").  Such FAA-approved repairs (DER-approved repairs) typically create cost savings or provide engineering flexibility.  The Flight Support Group also provides commercial airlines, regional operators, asset management companies and Maintenance, Repair and Overhaul ("MRO") providers with high quality and cost effective niche accessory component exchange services as an alternative to OEMs' spares services.

Distribution .  The Flight Support Group distributes FAA-approved parts including hydraulic, pneumatic, mechanical and electro-mechanical components for the commercial, regional and general aviation markets.  The Flight Support Group also is a leading supplier, distributor, and integrator of military aircraft parts and support services primarily to foreign military organizations allied with the United States. 

Manufacture of Specialty Aircraft/Defense Related Parts and Subcontracting for OEMs .  The Flight Support Group manufactures thermal insulation blankets and parts primarily for aerospace, defense and commercial applications.  The Flight Support Group also manufactures specialty components for sale as a subcontractor for aerospace and industrial original equipment manufacturers and the United States government. Further, the Flight Support Group manufactures advanced niche components and complex composite assemblies for commercial aviation, defense and space applications.

FAA Approvals and Product Design .  Non-OEM manufacturers of jet engine and aircraft component replacement parts must receive a PMA from the FAA to sell the replacement part.  The PMA approval process includes the submission of sample parts, drawings and testing data to one of the FAA's Aircraft Certification Offices where the submitted data are analyzed.  We believe that an applicant's ability to successfully complete the PMA process is limited by several factors, including (i) the agency's confidence level in the applicant; (ii) the complexity of the part; (iii) the volume of PMAs being filed; and (iv) the resources available to the FAA.  We also believe that companies such as HEICO that have demonstrated their manufacturing capabilities and established favorable track records with the FAA generally receive a faster turnaround time in the processing of PMA applications.  Finally, we believe that

the PMA process creates a significant barrier to entry in this market niche through both its technical demands and its limits on the rate at which competitors can bring products to market.

As part of our growth strategy, we have continued to increase our research and development activities.  Research and development expenditures by the Flight Support Group, which were approximately $.3 million in fiscal 1991, increased to approximately $14.2 million in fiscal 2013, $12.7 million in fiscal 2012 and $12.9 million in fiscal 2011.  We believe that our Flight Support Group's research and development capabilities are a significant component of our historical success and an integral part of our growth strategy.  In recent years, the FAA granted us PMAs for approximately 300 to 500 new parts and approximately 300 to 400 DER-approved repairs per year; however, no assurance can be given that the FAA will continue to grant PMAs or DER-approved repairs or that we will achieve acceptable levels of net sales and gross profits on such parts in the future.

We benefit from our proprietary rights relating to certain design, engineering and manufacturing processes and repair and overhaul procedures.  Customers often rely on us to provide initial and additional components, as well as to redesign, re-engineer, replace or repair and provide overhaul services on such aircraft components at every stage of their useful lives.  In addition, for some products, our unique manufacturing capabilities are required by the customer's specifications or designs, thereby necessitating reliance on us for production of such designed products.

We have no material patents for the proprietary techniques, including software and manufacturing expertise, we have developed to manufacture jet engine and aircraft component replacement parts and instead, we primarily rely on trade secret protection.  Although our proprietary techniques and software and manufacturing expertise are subject to misappropriation or obsolescence, we believe that we take appropriate measures to prevent misappropriation or obsolescence from occurring by developing new techniques and improving existing methods and processes, which we will continue on an ongoing basis as dictated by the technological needs of our business.

We believe that, based on our competitive pricing, reputation for high quality, short lead time requirements, strong relationships with domestic and foreign commercial air carriers and repair stations (companies that overhaul aircraft engines and/or components), and successful track record of receiving PMAs and DER-approved repairs from the FAA, we are uniquely positioned to continue to increase the products and services offered and gain market share.

Our Electronic Technologies Group's strategy is to design and produce mission-critical subcomponents for smaller, niche markets, but which are utilized in larger systems – systems like targeting, tracking, identification, simulation, testing, communications, lighting, surgical, medical imaging, baggage scanning, telecom and computer systems.  These systems are, in turn, often located on another platform, such as aircraft, satellites, ships, spacecrafts, land vehicles, handheld devices and other platforms.

Electro-Optical Infrared Simulation and Test Equipment .  The Electronic Technologies Group believes it is a leading international designer and manufacturer of niche state-of-the-art simulation, testing and calibration equipment used in the development of missile seeking technology, airborne targeting and reconnaissance systems, shipboard targeting and reconnaissance systems, space-based sensors as well as ground vehicle-based systems. These products include infrared scene projector equipment, such as our MIRAGE IR Scene Simulator, high precision blackbody sources, software and integrated calibration systems.

Simulation equipment allows the U.S. government and allied foreign military to save money on missile testing as it allows infrared-based missiles to be tested on a multi-axis, rotating table instead of requiring the launch of a complete missile.  In addition, several large military prime contractors have elected to purchase such equipment from us instead of maintaining internal staff to do so because we can offer a more cost-effective solution.  Our customers include major U.S. Department of Defense weapons laboratories and defense prime contractors.

Electro-Optical Laser Products .  The Electronic Technologies Group believes it is a leading designer and maker of Laser Rangefinder Receivers and other photodetectors used in airborne, vehicular and handheld targeting systems manufactured by major prime military contractors.  Most of our Rangefinder Receiver product offering consists of complex and patented products which detect reflected light from laser targeting systems and allow the systems to confirm target accuracy and calculate target distances prior to discharging a weapon system.  Some of these products are also used in laser eye surgery systems for tracking ocular movement.

Electro-Optical, Microwave and Other Power Equipment .  The Electronic Technologies Group produces power supplies, amplifiers and flash lamp drivers used in laser systems for military, medical and other applications that are sometimes utilized with our rangefinder receivers.  We also produce emergency back-up power supplies and batteries used on commercial aircraft and business jets for services such as emergency exit lighting, emergency fuel shut-off, power door assists, cockpit voice recorders and flight computers. We also design and manufacture next generation wireless cabin control systems, solid state power distribution and management systems and fuel level sensing systems for business jets and for general aviation, as well as for the military/defense market. We offer custom or standard designs that solve challenging OEM requirements and meet stringent safety and emissions requirements.  Our power electronics products include capacitor charger power supplies, laser diode drivers, arc lamp power supplies and custom power supply designs.

Our microwave products are used in both commercial and military satellites, spacecrafts and in electronic warfare systems.  These products, which include isolators, bias tees, circulators, latching ferrite switches and waveguide adapters are used in satellites and spacecrafts to control or direct energy according to operator needs. As satellites are frequently used as sensors for stand-off warfare, we believe this product line further supports our goal of increasing our activity in the stand-off market. Additionally, our microwave products include converters, receivers, transmitters, amplifiers, frequency sources and related sub-systems that address all major satellite frequencies. We believe we are a leading supplier of the niche products which we

design and manufacture for this market, a market that includes commercial satellites.  Our customers for these products include satellite and spacecraft manufacturers.

Electromagnetic and Radio Interference Shielding .  The Electronic Technologies Group designs and manufactures shielding used to prevent electromagnetic energy and radio frequencies from interfering with other devices, such as computers, telecommunication devices, avionics, weapons systems and other electronic equipment.  Our products include a patented line of shielding applied directly to circuit boards and a line of gasket-type shielding applied to computers and other electronic equipment.  Our customers consist essentially of medical, electronics, telecommunications and defense equipment producers.

High-Speed Interface Products .  The Electronic Technologies Group designs and manufactures advanced high-technology, high-speed interface products utilized in homeland security, defense, medical research, astronomical and other applications across numerous industries.

High Voltage Interconnection Devices .  The Electronic Technologies Group designs and manufactures high and very high voltage interconnection devices, cable assemblies and wire for the medical equipment, defense and other industrial markets.  Among others, our products are utilized in aircraft missile defense, fighter pilot helmet displays, avionic systems, medical applications, wireless communications, and industrial applications including high voltage test equipment and underwater monitoring systems.

High Voltage Advanced Power Electronics .  The Electronic Technologies Group designs and manufactures a patented line of high voltage energy generators for medical, baggage inspection and industrial imaging systems, and offers a patented line of high frequency power delivery systems for the commercial sign industry.  We also produce high voltage power supplies found in satellite communications, CT scanners and in medical and industrial x-ray systems.

Power Conversion Products .  The Electronic Technologies Group designs and provides innovative power conversion products principally serving the high-reliability military, space and commercial avionics end-markets. These high density, low profile and lightweight DC-to-DC converters and electromagnetic interference filters, which include thick film hermetically sealed hybrids, military commercial-off-the-shelf and custom designed and assembled products, have become the primary specified components of their kind on a generation of complex military, space and avionics equipment.

Underwater Locator Beacons .  The Electronic Technologies Group designs and manufactures Underwater Locator Beacons ("ULBs") used to locate aircraft Cockpit Voice Recorders and Flight Data Recorders, marine ship Voyage Recorders and various other devices which have been submerged under water.  ULBs are required equipment on all U.S. FAA and European Aviation Safety Agency ("EASA") approved Flight Data and Cockpit Voice Recorders used in aircraft and on similar systems utilized on large marine shipping vessels.

Traveling Wave Tube Amplifiers ("TWTAs") and Microwave Power Modules ("MPMs") .  The Electronic Technologies Group designs and manufactures TWTAs and MPMs predominately used in radar, electronic warfare, on-board jamming and countermeasure systems in aircraft, ships and detection platforms deployed by U.S. and allied non-U.S. military forces.

Three-Dimensional Microelectronic and Stacked Memory Products .  The Electronic Technologies Group designs, manufactures and markets three-dimensional microelectronic and stacked memory products including memories, Point of Load ("POL") voltage converters and peripherals, industrial memories, and complex System-In-Package ("SiP") solutions.  The products' patented designs provide high reliability memory and circuitry in a unique and stacked form which saves space and weight.  These products are principally integrated into larger subsystems equipping satellites and spacecraft and are also utilized in medical equipment.

Harsh environment connectivity products and custom molded cable assemblies .  The Electronic Technologies Group designs and manufactures high performance, high reliability and harsh environment electronic connectors and other interconnect products.  These products include connectors, jacks and plugs, cables, patch panels and switches utilized in aviation, broadcast/audio, defense, industrial, medical and other equipment.

RF and microwave amplifiers, transmitters and receivers. The Electronic Technologies Group designs and manufactures RF and microwave amplifiers, transmitters and receivers primarily used to support military communications on unmanned aerial systems, other aircraft, helicopters and ground-based data/communications systems.

As part of our growth strategy, we have continued to increase our research and development activities.  Research and development expenditures by the Electronic Technologies Group were $18.7 million in fiscal 2013, $17.7 million in fiscal 2012 and $12.5 million in fiscal 2011.  We believe that our Electronic Technologies Group's research and development capabilities are a significant component of our historical success and an integral part of our growth strategy.

See Note 15, Operating Segments, of the Notes to Consolidated Financial Statements for financial information by operating segment and by geographic areas.

Each of our operating segments independently conducts distribution, sales and marketing efforts directed at their respective customers and industries and, in some cases, collaborates with other operating divisions and subsidiaries within its group for cross-marketing efforts.  Sales and marketing efforts are conducted primarily by in-house personnel and, to a lesser extent, by independent manufacturers' representatives.  Generally, the in-house sales personnel receive a base salary plus commission and manufacturers' representatives receive a commission on sales.

We believe that direct relationships are crucial to establishing and maintaining a strong customer base and, accordingly, our senior management is actively involved in our marketing activities, particularly with established customers.  We are also a member of various trade and business organizations related to the commercial aviation industry, such as the Aerospace Industries Association, which we refer to as AIA, the leading trade association representing the nation's manufacturers of commercial, military and business aircraft, aircraft engines and related components and equipment.  Due in large part to our established industry presence, we enjoy strong customer relations, name recognition and repeat business.

We sell our products to a broad customer base consisting of domestic and foreign commercial and cargo airlines, repair and overhaul facilities, other aftermarket suppliers of aircraft engine and airframe materials, OEMs, domestic and foreign military units, electronic manufacturing services companies, manufacturers for the defense industry as well as medical, telecommunications, scientific, and industrial companies.  No one customer accounted for sales of 10% or more of total consolidated sales from continuing operations during any of the last three fiscal years.  Net sales to our five largest customers accounted for approximately 15%, 15% and 17% of total net sales in fiscal 2013, 2012 and 2011, respectively.

The aerospace product and service industry is characterized by intense competition. Some of our competitors have substantially greater name recognition, inventories, complementary product and service offerings, financial, marketing and other resources than we do.  As a result, such competitors may be able to respond more quickly to customer requirements than we can.  Moreover, smaller competitors may be in a position to offer more attractive pricing as a result of lower labor costs and other factors.

Our jet engine and aircraft component replacement parts business competes primarily with aircraft engine and aircraft component manufacturers.  The competition is principally based on price and service to the extent that our parts are interchangeable.  With respect to other aerospace products and services sold by the Flight Support Group, we compete with both the leading jet engine and aircraft component OEMs and a large number of machining, fabrication, distribution and repair companies, some of which have greater financial and other resources than we do.  Competition is based mainly on price, product performance, service and technical capability.

Competition for the repair and overhaul of jet engine and aircraft components comes from three principal sources: OEMs, major commercial airlines and other independent service companies.  Some of these competitors have greater financial and other resources than we do.  Some major commercial airlines own and operate their own service centers and sell repair and overhaul services to other aircraft operators.  Foreign airlines that provide repair and overhaul services typically provide these services for their own aircraft components and for third parties.  OEMs also maintain service centers that provide repair and overhaul services for the components they manufacture.  Other independent service organizations also compete for the repair and overhaul business of other users of aircraft components.  We believe that the principal

competitive factors in the repair and overhaul market are quality, turnaround time, overall customer service and price.

Our Electronic Technologies Group competes with several large and small domestic and foreign competitors, some of which have greater financial and other resources than we do.  The markets for our electronic products are niche markets with several competitors with competition based mainly on design, technology, quality, price, service and customer satisfaction.

We purchase a variety of raw materials, primarily consisting of high temperature alloy sheet metal and castings, forgings, pre-plated metals and electrical components from various vendors.  The materials used by our operations are generally available from a number of sources and in sufficient quantities to meet current requirements subject to normal lead times. We are subject to rules promulgated by the Securities Exchange Commission pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act regarding the use of certain materials (tantalum, tin, gold and tungsten), known as conflict minerals, which are mined from the Democratic Republic of the Congo and adjoining countries. These rules may impose additional costs and may introduce new risks related to our ability to verify the origin of any conflict minerals used in our products.

Our total backlog of unshipped orders was $305 million as of October 31, 2013 compared to $252 million as of October 31, 2012.  The Flight Support Group's backlog of unshipped orders was $115 million as of October 31, 2013 as compared to $80 million as of October 31, 2012.  This backlog excludes forecasted shipments for certain contracts of the Flight Support Group pursuant to which customers provide only estimated annual usage and not firm purchase orders.  Our backlogs within the Flight Support Group are typically short-lead in nature with many product orders being received within the month of shipment. The increase in the Flight Support Group's backlog is principally related to the backlog of a business acquired during fiscal 2013 and increased orders associated with one of our businesses that distributes OEM replacement parts. The Electronic Technologies Group's backlog of unshipped orders was $190 million as of October 31, 2013 as compared to $172 million as of October 31, 2012.  The increase in the Electronic Technologies Group's backlog is principally attributable to a fiscal 2013 acquisition.

The FAA regulates the manufacture, repair and operation of all aircraft and aircraft parts operated in the United States.  Its regulations are designed to ensure that all aircraft and aviation equipment are continuously maintained in proper condition to ensure safe operation of the aircraft.  Similar rules apply in other countries.  All aircraft must be maintained under a continuous condition monitoring program and must periodically undergo thorough inspection and maintenance.  The inspection, maintenance and repair procedures for the various

types of aircraft and equipment are prescribed by regulatory authorities and can be performed only by certified repair facilities utilizing certified technicians.  Certification and conformance is required prior to installation of a part on an aircraft.  Aircraft operators must maintain logs

concerning the utilization and condition of aircraft engines, life-limited engine parts and airframes.  In addition, the FAA requires that various maintenance routines be performed on aircraft engines, some engine parts, and airframes at regular intervals based on cycles or flight time.  Engine maintenance must also be performed upon the occurrence of certain events, such as foreign object damage in an aircraft engine or the replacement of life-limited engine parts.  Such maintenance usually requires that an aircraft engine be taken out of service.  Our operations may in the future be subject to new and more stringent regulatory requirements.  In that regard, we closely monitor the FAA and industry trade groups in an attempt to understand how possible future regulations might impact us.  Our businesses which sell defense products directly to the United States Government or for use in systems delivered to the United States Government can be subject to various laws and regulations governing pricing and other factors.

There has been no material adverse effect to our consolidated financial statements as a result of these government regulations.

Our operations are subject to extensive, and frequently changing, federal, state and local environmental laws and substantial related regulation by government agencies, including the Environmental Protection Agency.  Among other matters, these regulatory authorities impose requirements that regulate the operation, handling, transportation and disposal of hazardous materials; protect the health and safety of workers; and require us to obtain and maintain licenses and permits in connection with our operations.  This extensive regulatory framework imposes significant compliance burdens and risks on us.  Notwithstanding these burdens, we believe that we are in material compliance with all federal, state and local environmental laws and regulations governing our operations.

There has been no material adverse effect to our consolidated financial statements as a result of these environmental regulations.

We are also subject to a variety of other regulations including work-related and community safety laws.  The Occupational Safety and Health Act of 1970 mandates general requirements for safe workplaces for all employees and established the Occupational Safety and Health Administration ("OSHA") in the Department of Labor.  In particular, OSHA provides special procedures and measures for the handling of some hazardous and toxic substances.  In addition, specific safety standards have been promulgated for workplaces engaged in the treatment, disposal or storage of hazardous waste.  Requirements under state law, in some circumstances, may mandate additional measures for facilities handling materials specified as extremely dangerous.  We believe that our operations are in material compliance with OSHA's health and safety requirements.

We are a named insured under policies which include the following coverage: (i) product liability, including grounding; (ii) personal property, inventory and business income at our facilities; (iii) general liability coverage; (iv) employee benefit liability; (v) international liability and automobile liability; (vi) umbrella liability coverage; and (vii) various other activities or items subject to certain limits and deductibles.  We believe that our insurance coverage is adequate to insure against the various liability risks of our business.

As of October 31, 2013, we had approximately 3,500 full-time and part-time employees including approximately 1,900 in the Flight Support Group and approximately 1,600 in the Electronic Technologies Group.  None of our employees are represented by a union.  Our management believes that we have good relations with our employees.

Our Internet website address is http://www.heico.com.  We make available free of charge, through the Investors section of our website, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission ("SEC").  These materials are also available free of charge on the SEC's website at http://www.sec.gov.  The information on or obtainable through our website is not incorporated into this annual report on Form 10-K.

We have adopted a code of ethics that applies to our principal executive officer, principal financial officer, principal accounting officer or controller and other persons performing similar functions.  Our Code of Ethics for Senior Financial Officers and Other Officers is part of our Code of Business Conduct, which is located on our website at http://www.heico.com.  Any amendments to or waivers from a provision of this code of ethics will be posted on the website.  Also located on the website are our Corporate Governance Guidelines, Finance/Audit Committee Charter, Nominating & Corporate Governance Committee Charter, and Compensation Committee Charter.

Copies of the above referenced materials will be made available, free of charge, upon written request to the Corporate Secretary at the Company's headquarters.

Our executive officers are elected by the Board of Directors and serve at the discretion of the Board.  The following table sets forth the names, ages of, and positions and offices held by our executive officers as of December 18, 2013:

Laurans A. Mendelson has served as our Chairman of the Board since December 1990.  He has also served as our Chief Executive Officer since February 1990 and served as our President from September 1991 through September 2009.  Mr. Mendelson serves on the Board of Governors of the Aerospace Industries Association ("AIA") in Washington D.C., of which HEICO is a member.  He is also former Chairman of the Board of Trustees, former Chairman of the Executive Committee and a current member of the Society of Mount Sinai Founders of Mount Sinai Medical Center in Miami Beach, Florida.  In addition, Mr. Mendelson is a Trustee Emeritus of Columbia University in The City of New York, where he previously served as Trustee and Chairman of the Trustees' Audit Committee.  Mr. Mendelson is a Certified Public Accountant.  Laurans Mendelson is the father of Eric Mendelson and Victor Mendelson.

Eric A. Mendelson has served as our Co-President since October 2009 and served as our Executive Vice President from 2001 through September 2009.  He also has served as President and Chief Executive Officer of HEICO Aerospace Holdings Corp., a subsidiary of ours, since its formation in 1997, President of HEICO Aerospace Corporation since 1993 and President and Chief Executive Officer of HEICO Flight Support Corp. since its formation in 2012. Mr. Mendelson is a co-founder, and, since 1987, has been Managing Director of Mendelson International Corporation, a private investment company, which is a shareholder of HEICO.  In addition, Mr. Mendelson is a member of the Advisory Board of Trustees of Mount Sinai Medical Center in Miami Beach, Florida and Vice Chair of the Board of Trustees of Ransom Everglades School in Coconut Grove, Florida, as well as a member of the Board of Directors of the Columbia College Alumni Association.  Eric Mendelson is the son of Laurans Mendelson and the brother of Victor Mendelson.

Victor H. Mendelson has served as our Co-President since October 2009 and served as our Executive Vice President from 2001 through September 2009.  He also has served as President and Chief Executive Officer of HEICO Electronic Technologies Corp., a subsidiary of ours, since its formation in September 1996.  He served as our General Counsel from 1993 to 2008 and our Vice President from 1996 to 2001.  In addition, Mr. Mendelson was the Chief Operating Officer of our former MediTek Health Corporation subsidiary from 1995 until its profitable sale in 1996.  Mr. Mendelson is a co-founder, and, since 1987, has been President of Mendelson International Corporation, a private investment company which is a shareholder of HEICO.  He is Vice Chair of the Board of Visitors of Columbia College in New York City, a Trustee of St. Thomas University in Miami Gardens, Florida and is Immediate Past President of the Board of Directors of the Florida Grand Opera.  Victor Mendelson is the son of Laurans Mendelson and the brother of Eric Mendelson.

Thomas S. Irwin has served as our Senior Executive Vice President since June 2012; our Executive Vice President, Chief Financial Officer and Treasurer from September 1991 through May 2012; Senior Vice President and Treasurer from 1986 to 1991; and our Vice President and Treasurer from 1982 to 1986.  Mr. Irwin is a Certified Public Accountant.  He is a Trustee of the Greater Hollywood Chamber of Commerce and a member of the Board of Directors of the Greater Fort Lauderdale Alliance/Broward County.

Carlos L. Macau, Jr. has served as our Executive Vice President - Chief Financial Officer and Treasurer since June 2012. Mr. Macau joined HEICO from the international public accounting firm of Deloitte & Touche LLP where he worked from 2000 to 2012 as an Audit Partner. Prior to joining HEICO, Mr. Macau accumulated 22 years of financial and accounting experience serving a number of public and private manufacturing and service clients in a broad range of industries. His client responsibilities included serving as HEICO's lead client services partner for five years (2006 to 2010). Mr. Macau is a Certified Public Accountant and a member of the American and Florida Institutes of Certified Public Accountants.

William S. Harlow has served as our Vice President - Acquisitions since 2001 and served as Director of Corporate Development from 1995 to 2001.

Steven M. Walker has served as our Chief Accounting Officer since June 2012 and served as our Corporate Controller from 2002 through May 2012. He has also served as our Assistant Treasurer since 2002. Mr. Walker is a Certified Public Accountant.

Our business, financial condition, operating results and cash flows can be impacted by a number of factors, many of which are beyond our control, including those set forth below and elsewhere in this Annual Report on Form 10-K, any one of which may cause our actual results to differ materially from anticipated results:

     General global industry and economic conditions that affect the aviation industry also affect our business.  We are subject to macroeconomic cycles and when recessions occur, we may experience reduced orders, payment delays, supply chain disruptions or other factors as a result of the economic challenges faced by our customers, prospective customers and suppliers.  Further, the aviation industry has historically been subject to downward cycles from time to time which reduce the overall demand for jet engine and aircraft component replacement parts and repair and overhaul services, and such downward cycles result in lower sales and greater credit risk.  Demand for commercial air travel can be influenced by airline industry profitability, world trade policies, government-to-government relations, terrorism, disease outbreaks, environmental constraints imposed upon aircraft operations, technological changes, price and other competitive factors.  These global industry and economic conditions may have a material adverse effect on our business, financial condition and results of operations.

Governmental agencies throughout the world, including the FAA, highly regulate the manufacture, repair and overhaul of aircraft parts and accessories.  We include, with the replacement parts that we sell to our customers, documentation certifying that each part complies with applicable regulatory requirements and meets applicable standards of airworthiness established by the FAA or the equivalent regulatory agencies in other countries.  In addition, our repair and overhaul operations are subject to certification pursuant to regulations established by the FAA.  Specific regulations vary from country to country, although compliance with FAA requirements generally satisfies regulatory requirements in other countries.  The revocation or suspension of any of our material authorizations or approvals would have an adverse effect on our business, financial condition and results of operations.  New and more stringent government regulations, if adopted and enacted, could have an adverse effect on our business, financial condition and results of operations.  In addition, some sales to foreign countries of the equipment manufactured by our Electronic Technologies Group require approval or licensing from the U.S. government.  Denial of export licenses could reduce our sales to those countries and could have a material adverse effect on our business.

Pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act, the Securities and Exchange Commission promulgated final rules regarding disclosure of the use of certain minerals (tantalum, tin, gold and tungsten), known as conflict minerals, which are mined from the Democratic Republic of the Congo and adjoining countries. There may be costs associated with complying with the disclosure requirements, such as costs related to determining the source of certain minerals used in our products, as well as costs of possible changes to products, processes, or sources of supply as a consequence of such verification activities. Given the complexity of our supply chain, we may not be able to ascertain the origin of these minerals used in our products in a timely manner, which could cause some of our customers to disqualify us as a supplier to the extent we are unable to certify our products are conflict mineral free. Additionally, the new rule could affect sourcing at competitive prices and availability in sufficient quantities of such minerals used in our manufacturing processes for certain products.

Our Flight Support Group designs and manufactures jet engine and aircraft component replacement parts and also repairs, overhauls and distributes jet engine and aircraft components.  If aircraft or engines for which we offer replacement parts or supply repair and overhaul services are retired and there are fewer aircraft that require these parts or services, our revenues may decline.

In fiscal 2013, approximately 52% of the sales of our Electronic Technologies Group were derived from the sale of defense, commercial and defense satellite and spacecraft components and homeland security products.  A decline in defense, space or homeland security budgets or additional restrictions imposed by the U.S. government on sales of products or services to foreign military agencies could lower sales of our products and services.

We market our products and services in approximately 100 countries, with approximately 35% of our consolidated net sales in fiscal 2013 derived from sales to foreign customers.  We expect that sales to foreign customers will continue to account for a significant portion of our revenues in the foreseeable future.  As a result, we are subject to risks of doing business internationally, including the following:

While the impact of these factors is difficult to predict, any one or more of these factors may have a material adverse effect on our business, financial condition and results of operations.

We face significant competition in each of our businesses.

Flight Support Group

overhaul units;

Electronic Technologies Group

The aviation aftermarket supply industry is highly fragmented, has several highly visible leading companies, and is characterized by intense competition.  Some of our OEM competitors have greater name recognition than HEICO, as well as complementary lines of business and financial, marketing and other resources that HEICO does not have.  In addition, OEMs, aircraft maintenance providers, leasing companies and FAA-certificated repair facilities may attempt to bundle their services and product offerings in the supply industry, thereby significantly increasing industry competition.  Moreover, our smaller competitors may be able to offer more attractive pricing of parts as a result of lower labor costs or other factors.  A variety of potential actions by any of our competitors, including a reduction of product prices or the establishment by competitors of long-term relationships with new or existing customers, could have a material adverse effect on our business, financial condition and results of operations.  Competition typically intensifies during cyclical downturns in the aviation industry, when supply may exceed demand.  We may not be able to continue to compete effectively against present or future

competitors, and competitive pressures may have a material and adverse effect on our business, financial condition and results of operations.

The aviation, defense, space, medical, telecommunication and electronics industries are constantly undergoing development and change and, accordingly, new products, equipment and methods of repair and overhaul service are likely to be introduced in the future.  In addition to manufacturing electronic and electro-optical equipment and selected aerospace and defense components for OEMs and the U.S. government and repairing jet engine and aircraft components, we re-design sophisticated aircraft replacement parts originally developed by OEMs so that we can offer the replacement parts for sale at substantially lower prices than those manufactured by the OEMs.  Consequently, we devote substantial resources to research and product development.  Technological development poses a number of challenges and risks, including the following:

In addition, we may not be able to successfully develop new products, equipment or methods of repair and overhaul service, and the failure to do so could have a material adverse effect on our business, financial condition and results of operations.

A key element of our strategy is growth through the acquisition of additional companies.  Our acquisition strategy is affected by and poses a number of challenges and risks, including the following:

We may not be able to successfully execute our acquisition strategy, and the failure to do so could have a material adverse effect on our business, financial condition and results of operations.

Our business is affected by the availability and price of the raw materials and component parts that we use to manufacture our products.  Our ability to manage inventory and meet delivery requirements may be constrained by our suppliers' ability to adjust delivery of long-lead time products during times of volatile demand.  The supply chains for our business could also be disrupted by external events such as natural disasters, extreme weather events, labor disputes, governmental actions and legislative or regulatory changes.  As a result, our suppliers may fail to perform according to specifications when required and we may be unable to identify alternate suppliers or to otherwise mitigate the consequences of their non-performance.  Transitions to new suppliers may result in significant costs and delays, including those related to the required recertification of parts obtained from new suppliers with our customers and/or regulatory agencies.  Our inability to fill our supply needs could jeopardize our ability to fulfill obligations under customer contracts, which could result in reduced revenues and profits, contract penalties or terminations, and damage to customer relationships.  Further, increased costs of such raw materials or components could reduce our profits if we were unable to pass along such price increases to our customers.

The costs to meet customer specifications and requirements could result in us having to spend more to design or manufacture products and this could reduce our profit margins on current contracts or those we obtain in the future.

Our jet engine and aircraft component replacement parts and repair and overhaul services expose our business to potential liabilities for personal injury or death as a result of the failure of an aircraft component that we have designed, manufactured or serviced.  While we maintain liability insurance to protect us from future product liability claims, an uninsured or partially insured claim, or a claim for which third-party indemnification is not available, could have a material adverse effect on our business, financial condition and results of operations. Additionally, our customers typically require us to maintain substantial insurance coverage at commercially reasonable rates and our inability to obtain insurance coverage at commercially reasonable rates could have a material adverse effect on our business.

Our operations and facilities are subject to a number of federal, state and local environmental laws and regulations, which govern, among other things, the discharge of hazardous materials into the air and water as well as the handling, storage and disposal of hazardous materials.  Pursuant to various environmental laws, a current or previous owner or operator of real property may be liable for the costs of removal or remediation of hazardous materials.  Environmental laws typically impose liability whether or not the owner or operator knew of, or was responsible for, the presence of hazardous materials.  Although management believes that our operations and facilities are in material compliance with environmental laws and regulations, future changes in them or interpretations thereof or the nature of our operations may require us to make significant additional capital expenditures to ensure compliance in the future.

We do not maintain specific environmental liability insurance and the expenses related to these environmental liabilities, if we are required to pay them, could have a material adverse effect on our business, financial condition and results of operations.

Several of our facilities, as a result of their locations, could be subject to a catastrophic loss caused by hurricanes, tornadoes, earthquakes, floods, fire, power loss, telecommunication and information systems failure or similar events.  Our corporate headquarters and facilities located in Florida are particularly susceptible to hurricanes, storms, tornadoes or other natural disasters that could disrupt our operations, delay production and shipments, and result in large

expenses to repair or replace the facility or facilities.  Should insurance or other risk transfer mechanisms, such as our existing disaster recovery and business continuity plans, be insufficient to recover all costs, we could experience a material adverse effect on our business, financial condition and results of operations.

We rely on information technology systems, some of which are managed by third parties, to process, transmit and store electronic information, and to manage or support a variety of critical business processes and activities. We also collect and store sensitive data, including confidential business information and personal data. These systems may be susceptible to damage, disruptions or shutdowns due to attacks by computer hackers, computer viruses, employee error or malfeasance, power outages, hardware failures, telecommunication or utility failures, catastrophes or other unforeseen events. In addition, security breaches of our systems could result in the misappropriation or unauthorized disclosure of confidential information or personal data belonging to us or to our employees, partners, customers or suppliers. Any such events could disrupt our operations, delay production and shipments, result in defective products or services, damage customer relationships and our reputation and result in legal claims or proceedings that could have a material adverse effect on our business.

We file income tax returns in the U.S. federal jurisdiction, multiple state jurisdictions and certain jurisdictions outside the U.S.  In fiscal 2013, our effective tax rate was 31.1% of our income before income taxes and noncontrolling interests.  Our future effective tax rate may be adversely affected by a number of factors, including the following:

Any significant increase in our future effective tax rates could have a material adverse effect on net income for future periods.

We have experienced rapid growth in recent periods and intend to continue to pursue an aggressive growth strategy, both through acquisitions and internal expansion of products and services.  Our growth to date has placed, and could continue to place, significant demands on our administrative, operational and financial resources.  We may not be able to grow effectively or manage our growth successfully, and the failure to do so could have a material adverse effect on our business, financial condition and results of operations.

Our success substantially depends on the performance, contributions and expertise of our senior management team led by Laurans A. Mendelson, our Chairman and Chief Executive Officer; Eric A. Mendelson, our Co-President; and Victor H. Mendelson, our Co-President.  Technical employees are also critical to our research and product development, as well as our ability to continue to re-design sophisticated products of OEMs in order to sell competing replacement parts at substantially lower prices than those manufactured by the OEMs.  The loss of the services of any of our executive officers or other key employees or our inability to continue to attract or retain the necessary personnel could have a material adverse effect on our business, financial condition and results of operations.

As of December 17, 2013, collectively our executive officers and entities controlled by them, our 401(k) Plan and members of the Board of Directors beneficially owned approximately 21% of our outstanding Common Stock and approximately 6% of our outstanding Class A Common Stock.  Accordingly, they will be able to substantially influence the election of the Board of Directors and control our business, policies and affairs, including our position with respect to proposed business combinations and attempted takeovers.

None.

We own or lease a number of facilities, which are utilized by our Flight Support Group ("FSG"), Electronic Technologies Group ("ETG") and corporate offices.  As of October 31, 2013, all of the facilities listed below were in good operating condition, well maintained and in regular use.  We believe that our existing facilities are sufficient to meet our operational needs for the foreseeable future.  Summary information on the facilities utilized within the FSG, ETG and our corporate offices to support their principal operating activities is as follows:

We are involved in various legal actions arising in the normal course of business.  Based upon the Company's and our legal counsel's evaluations of any claims or assessments, management is of the opinion that the outcome of these matters will not have a material effect on our results of operations, financial position or cash flows.

None.

Our Class A Common Stock and Common Stock are listed and traded on the New York Stock Exchange ("NYSE") under the symbols "HEI.A" and "HEI," respectively.  The following tables set forth, for the periods indicated, the high and low share prices for our Class A Common Stock and our Common Stock as reported on the NYSE, as well as the amount of cash dividends paid per share during such periods.

In September 2013 and March 2012, the Company's Board of Directors declared a 5-for-4 stock split on both classes of the Company's common stock.  The stock splits were effected as of October 23, 2013 and April 25, 2012, respectively, in the form of a 25% stock dividend distributed to shareholders of record as of October 11, 2013 and April 13, 2012, respectively.  All applicable share and per share information has been adjusted retrospectively to give effect to the 5-for-4 stock splits.

As of December 17, 2013, there were 427 holders of record of our Class A Common Stock and 441 holders of our Common Stock.

The following graph and table compare the total return on $100 invested in HEICO Common Stock and HEICO Class A Common Stock with the total return of $100 invested in the NYSE Composite Index and the Dow Jones U.S. Aerospace Index for the five-year period from October 31, 2008 through October 31, 2013.  The NYSE Composite Index measures the performance of all common stocks listed on the NYSE.  The Dow Jones U.S. Aerospace Index is comprised of large companies which make aircraft, major weapons, radar and other defense equipment and systems as well as providers of satellites and spacecrafts used for defense purposes.  The total returns include the reinvestment of cash dividends.

The following graph and table compare the total return on $100 invested in HEICO Common Stock since October 31, 1990 using the same indices shown on the five-year performance graph above.  October 31, 1990 was the end of the first fiscal year following the date the current executive management team assumed leadership of the Company.  No Class A Common Stock was outstanding as of October 31, 1990.  As with the five-year performance graph, the total returns include the reinvestment of cash dividends.

We have historically paid semi-annual cash dividends on both our Class A Common Stock and Common Stock. In December 2012, we paid a special and extraordinary $1.712 per share cash dividend on both classes of HECIO common stock as well as a regular $.048 per share cash dividend that was accelerated from January 2013 in view of impending tax increases that took effect in calendar 2013. In July 2013, we paid our 70 th consecutive semi-annual cash dividend since 1979. The cash dividend of $.056 per share represented a 17% increase over the prior semi-annual per share amount of $.048. On December 17, 2013, our Board of Directors declared a regular semi-annual cash dividend of $.06 per share and a special and extraordinary cash dividend of $.35 per share on both classes of HEICO common stock. The cash dividends will be paid in one payment totaling $.41 per share on January 17, 2014 to shareholders of record as of January 3, 2014. The regular semi-annual cash dividend represents a 7% increase over the prior semi-annual per share amount of $.056 (as adjusted for the 5-for-4 stock split distributed in October 2013). Our Board of Directors will continue to review our dividend policy and will regularly evaluate whether dividends should be paid in cash or stock, as well as what amounts should be paid. Our ability to pay dividends could be affected by future business performance, liquidity, capital needs, alternative investment opportunities and loan covenants under our revolving credit facility.

There were no purchases of our equity securities during the fourth quarter of fiscal 2013.

There were no unregistered sales of our equity securities during fiscal 2013.

__________________

Our business is comprised of two operating segments, the Flight Support Group ("FSG") and the Electronic Technologies Group ("ETG").

The Flight Support Group consists of HEICO Aerospace Holdings Corp. ("HEICO Aerospace"), which is 80% owned, and HEICO Flight Support Corp., which is wholly owned, and their collective subsidiaries, which primarily:

The Electronic Technologies Group consists of HEICO Electronic Technologies Corp. ("HEICO Electronic") and its subsidiaries, which primarily:

environment connectivity products and custom molded cable assemblies; RF and microwave amplifiers, transmitters and receivers used to support military communications on unmanned aerial systems, other aircraft, helicopters and ground-based data/communications systems, wireless cabin control systems, solid state power distribution and management systems and fuel level sensing systems for business jets and for general aviation, as well as for the military/defense market and microwave modules, units and integrated sub-systems for commercial and military satellites.

Our results of operations during each of the past three fiscal years have been affected by a number of transactions.  This discussion of our financial condition and results of operations should be read in conjunction with the Consolidated Financial Statements and Notes thereto included herein.  All applicable share and per share information has been adjusted retrospectively to reflect the 5-for-4 stock splits effected in October 2013, April 2012 and April 2011.  See Note 1, Summary of Significant Accounting Policies – Stock Splits, of the Notes to Consolidated Financial Statements for additional information regarding these stock splits.  For further information regarding the acquisitions discussed below, see Note 2, Acquisitions, of the Notes to Consolidated Financial Statements.  Acquisitions are included in our results of operations from the effective dates of acquisition.

In October 2013, we acquired, through HEICO Electronic, all of the outstanding stock of Lucix Corporation ("Lucix") in a transaction carried out by means of a merger. Lucix is a leading designer and manufacturer of high performance, high reliability microwave modules, units, and integrated sub-systems for commercial and military satellites.

On May 31, 2013, we acquired, through HEICO Flight Support Corp., Reinhold Industries, Inc. ("Reinhold") through the acquisition of all of the outstanding stock of Reinhold's parent company in a transaction carried out by means of a merger. Reinhold is a leading manufacturer of advanced niche components and complex composite assemblies for commercial aviation, defense and space applications.

In October 2012, we acquired, through HEICO Flight Support Corp., 80.1% of the assets and assumed certain liabilities of Action Research Corporation ("Action Research"). Action Research is an FAA-Approved Repair Station that has developed unique proprietary repairs that extend the lives of certain engine and airframe components. The remaining 19.9% interest continues to be owned by an existing member of Action Research's management team. The purchase price of this acquisition was paid using cash provided by operating activities.

In August 2012, we acquired, through HEICO Flight Support Corp., 84% of the assets and assumed certain liabilities of CSI Aerospace, Inc. ("CSI Aerospace").  CSI Aerospace is a leading repair and overhaul provider of specialized components for airlines, military and other aerospace related organizations.  The remaining 16% interest continues to be owned by certain members of CSI Aerospace's management team.

In April 2012, we acquired, through HEICO Electronic, certain aerospace assets of Moritz Aerospace, Inc. ("Moritz Aerospace") in an aerospace product line acquisition.  The

Moritz Aerospace product line designs and manufactures next generation wireless cabin control systems, solid state power distribution and management systems and fuel level sensing systems for business jets and for general aviation, as well as for the military/defense market segments. The purchase price of this acquisition was paid using cash provided by operating activities.

In March 2012, we acquired, through HEICO Electronic, the business and substantially all of the assets of Ramona Research, Inc. ("Ramona Research"). Ramona Research designs and manufactures RF and microwave amplifiers, transmitters and receivers primarily used to support military communications on unmanned aerial systems, other aircraft, helicopters and ground-based data/communications systems.

On November 22, 2011, we acquired, through HEICO Electronic, Switchcraft, Inc. ("Switchcraft") through the purchase of all of the stock of Switchcraft's parent company, Switchcraft Holdco, Inc. Switchcraft is a leading designer and manufacturer of high performance, high reliability and harsh environment electronic connectors and other interconnect products.

In September 2011, we acquired, through HEICO Electronic, all of the outstanding capital stock of 3D Plus SA ("3D Plus").  3D Plus is a leading designer and manufacturer of three-dimensional microelectronic and stacked memory products used predominately in satellites and also utilized in medical equipment.

In December 2010, we acquired, through HEICO Aerospace, 80.1% of the assets and assumed certain liabilities of Blue Aerospace LLC ("Blue Aerospace").  Blue Aerospace is a supplier, distributor, and integrator of military aircraft parts and support services primarily to foreign military organizations allied with the United States.  The remaining 19.9% interest continues to be owned by certain members of Blue Aerospace's management team.

Unless otherwise noted, the purchase price of each of the above referenced acquisitions was paid in cash principally using proceeds from our revolving credit facility. The aggregate cost paid in cash for acquisitions, including additional purchase consideration payments, was $222.6 million, $197.3 million and $94.7 million in fiscal 2013, 2012 and 2011, respectively.

 In February 2011, we acquired, through HEICO Aerospace, an additional 8% equity interest in one of our subsidiaries, which increased our ownership interest to 80%. In February 2012, we acquired an additional 6.7% equity interest in the subsidiary, which increased our ownership interest to 86.7%. In December 2012, we acquired the remaining 13.3% equity interest in the subsidiary.

We believe that the following are our most critical accounting policies, some of which require management to make judgments about matters that are inherently uncertain.

Revenue Recognition

Revenue from the sale of products and the rendering of services is recognized when title and risk of loss passes to the customer, which is generally at the time of shipment.  Revenue from certain fixed price contracts for which costs can be dependably estimated is recognized on the percentage-of-completion method, measured by the percentage of costs incurred to date to estimated total costs for each contract.  This method is used because management considers costs incurred to be the best available measure of progress on these contracts.  Variations in actual labor performance, changes to estimated profitability and final contract settlements may result in revisions to cost estimates.  Revisions in cost estimates as contracts progress have the effect of increasing or decreasing profits in the period of revision.  Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. The percentage of our net sales recognized under the percentage-of-completion method was approximately 1% in fiscal 2013, 2012 and 2011.  Changes in estimates pertaining to percentage-of-completion contracts did not have a material or significant effect on net income or net income per share in fiscal 2013, 2012 or 2011.

For fixed price contracts in which costs cannot be dependably estimated, revenue is recognized on the completed-contract method.  A contract is considered complete when all significant costs have been incurred or the item has been accepted by the customer. Progress billings and customer advances received on fixed price contracts accounted for under the completed-contract method are classified as a reduction to contract costs that are included in inventories, if any, and any remaining amount is included in accrued expenses and other current liabilities.

Valuation of Accounts Receivable

The valuation of accounts receivable requires that we set up an allowance for estimated uncollectible accounts and record a corresponding charge to bad debt expense.  We estimate uncollectible receivables based on such factors as our prior experience, our appraisal of a customer's ability to pay, age of receivables outstanding and economic conditions within and outside of the aviation, defense, space, medical, telecommunications and electronics industries.  Actual bad debt expense could differ from estimates made.

Valuation of Inventory

Inventory is stated at the lower of cost or market, with cost being determined on the first-in, first-out or the average cost basis.  Losses, if any, are recognized fully in the period when identified.

We periodically evaluate the carrying value of inventory, giving consideration to factors such as its physical condition, sales patterns and expected future demand in order to estimate the amount necessary to write down any slow moving, obsolete or damaged inventory.  These estimates could vary significantly from actual amounts based upon future economic conditions,

customer inventory levels, or competitive factors that were not foreseen or did not exist when the estimated write-downs were made.

In accordance with industry practice, all inventories are classified as a current asset including portions with long production cycles, some of which may not be realized within one year.

Business Combinations

We allocate the purchase price of acquired entities to the underlying tangible and identifiable intangible assets acquired and liabilities and any noncontrolling interests assumed based on their estimated fair values, with any excess recorded as goodwill.  Determining the fair value of assets acquired and liabilities assumed requires management's judgment and often involves the use of significant estimates and assumptions, including assumptions with respect to future cash inflows and outflows, discount rates, asset lives and market multiples, among other items.  We determine the fair values of such assets, principally intangible assets, generally in consultation with third-party valuation advisors.

As part of the agreement to acquire certain subsidiaries, we may be obligated to pay contingent consideration should the acquired entity meet certain earnings objectives subsequent to the date of acquisition. As of the acquisition date, contingent consideration is recorded at fair value as determined through the use of a probability-based scenario analysis approach. Under this method, a set of discrete potential future subsidiary earnings is determined using internal estimates based on various revenue growth rate assumptions for each scenario. A probability of likelihood is then assigned to each discrete potential future earnings estimate and the resultant contingent consideration is calculated and discounted using a weighted average discount rate reflecting the credit risk of a market participant. Subsequent to the acquisition date, the fair value of such contingent consideration is measured each reporting period and any changes are recorded within our Consolidated Statements of Operations. Changes in either the revenue growth rates, related earnings or the discount rate could result in a material change to the amount of contingent consideration accrued. As of October 31, 2013 and 2012, $29.3 million and $10.9 million of such contingent consideration was accrued within our Consolidated Balance Sheets, respectively. During fiscal 2013, 2012 and 2011, such fair value measurement adjustments resulted in a net gain of $1.6 million, a loss of $.1 million and a gain of $1.2 million, respectively.

Valuation of Goodwill and Other Intangible Assets

We test goodwill for impairment annually as of October 31, or more frequently if events or changes in circumstances indicate that the carrying amount of goodwill may not be fully recoverable.  In evaluating the recoverability of goodwill, we compare the fair value of each of our reporting units to its carrying value to determine potential impairment.  If the carrying value of a reporting unit exceeds its fair value, the implied fair value of that reporting unit's goodwill is to be calculated and an impairment loss is recognized in the amount by which the carrying value of the reporting unit's goodwill exceeds its implied fair value, if any.  The fair values of our

reporting units were determined using a weighted average of a market approach and an income approach.  Under the market approach, fair values are estimated using published market multiples for comparable companies. We calculate fair values under the income approach by taking estimated future cash flows that are based on internal projections and other assumptions deemed reasonable by management and discounting them using an estimated weighted average cost of capital.  Based on the annual goodwill impairment test as of October 31, 2013, 2012 and 2011, we determined there was no impairment of our goodwill.  The fair value of each of our reporting units as of October 31, 2013 significantly exceeded its carrying value.

We test each non-amortizing intangible asset (principally trade names) for impairment annually as of October 31, or more frequently if events or changes in circumstances indicate that the asset might be impaired. To derive the fair value of our trade names, we utilize an income approach, which relies upon management's assumptions of royalty rates, projected revenues and discount rates.  We also test each amortizing intangible asset for impairment if events or circumstances indicate that the asset might be impaired.  The test consists of determining whether the carrying value of such assets will be recovered through undiscounted expected future cash flows.  If the total of the undiscounted future cash flows is less than the carrying amount of those assets, we recognize an impairment loss based on the excess of the carrying amount over the fair value of the assets.  The determination of fair value requires us to make a number of estimates, assumptions and judgments of such factors as projected revenues and earnings and discount rates.  Based on the intangible impairment tests conducted, we did not recognize any impairment losses in fiscal 2013 and 2012; however, we recognized pre-tax impairment losses related to the write-down of certain customer relationships, intellectual property and trade names of $4.3 million, $.5 million and $.2 million, respectively, during fiscal 2011, within the ETG to their estimated fair values.  The impairment losses pertaining to certain customer relationships and trade names were recorded as a component of selling, general and administrative expenses in the Company's Consolidated Statements of Operations and the impairment losses pertaining to intellectual property were recorded as a component of costs of goods sold.

Assumptions utilized to determine fair value in the goodwill and intangible assets impairment tests are highly judgmental.  If there is a material change in such assumptions or if there is a material change in the conditions or circumstances influencing fair value, we could be required to recognize a material impairment charge.  See Item 1A., Risk Factors, for a list of factors of which any may cause our actual results to differ materially from anticipated results.

The following table sets forth the results of our operations, net sales and operating income by segment and the percentage of net sales represented by the respective items in our Consolidated Statements of Operations (in thousands) :

Net Sales

Our net sales in fiscal 2013 increased by 12% to a record $1,008.8 million, as compared to net sales of $897.3 million in fiscal 2012. The increase in net sales reflects an increase of $94.8 million (a 17% increase) to a record $665.1 million within the FSG as well as an increase of $18.4 million (a 6% increase) to a record $350.0 million within the ETG. The net sales increase in the FSG reflects organic growth of approximately 9% as well as additional net sales of $42.3 million from the fiscal 2013 and 2012 acquisitions. The organic growth in the FSG principally reflects an increase in net sales from new product offerings and improving market conditions resulting in a $40.7 million increase in net sales within our aftermarket replacement parts and repair and overhaul services product lines and an $11.8 million increase in net sales within our specialty products lines. The net sales increase in the ETG reflects organic growth of approximately 3% as well as additional net sales of $8.0 million from fiscal 2013 and 2012 acquisitions. The organic growth in the ETG principally reflects increased demand for certain space and aerospace products resulting in a $12.2 million and $3.3 million increase in net sales from these product lines, respectively, partially offset by a decrease in demand for certain of our defense and medical products resulting in a $3.1 million and $1.9 million decrease in net sales from these product lines, respectively. Sales price changes were not a significant contributing factor to the FSG and ETG net sales growth for fiscal 2013.

Our net sales in fiscal 2013 and 2012 by market approximated 54% and 53%, respectively, from the commercial aviation industry, 26% and 26%, respectively, from the defense and space industries, and 20% and 21%, respectively, from other industrial markets including medical, electronics and telecommunications.

Gross Profit and Operating Expenses

Our consolidated gross profit margin increased to 36.8% in fiscal 2013 as compared to 36.5% in fiscal 2012, principally reflecting a 1.4% and .1% increase in the ETG's and FSG's gross profit margin, respectively. The increase in the ETG's gross profit margin is principally attributed to increased net sales and a more favorable product mix for certain of our space products partially offset by lower net sales and a less favorable product mix for certain of our defense products. Total new product research and development expenses included within our consolidated cost of sales increased to $32.9 million in fiscal 2013 compared to $30.4 million in fiscal 2012.

Selling, general and administrative ("SG&A") expenses were $187.6 million and $164.1 million for fiscal 2013 and fiscal 2012, respectively. The increase in SG&A expenses reflects an increase of $18.5 million in general and administrative expenses principally attributed to an $8.9 million increase from the fiscal 2013 and 2012 acquired businesses and the remainder to support the higher net sales volumes including an increase in accrued performance awards based on the improved consolidated operating results. Additionally, the increase in SG&A expenses reflects an increase of $5.0 million in selling expenses of which $1.3 million pertains to

the acquired businesses and the remainder is attributed to higher sales-related commissions and other costs from the nets sales growth. SG&A expenses as a percentage of net sales increased to 18.6% for fiscal 2013 as compared to 18.3% for fiscal 2012 principally reflecting the impact from the previously mentioned increase in accrued performance awards.

Operating Income

Operating income for fiscal 2013 increased by 12% to a record $183.6 million as compared to operating income of $163.3 million for fiscal 2012. The increase in operating income reflects an $18.1 million increase (a 17% increase) to a record $122.1 million in operating income of the FSG for fiscal 2013, up from $103.9 million for fiscal 2012 and a $5.6 million increase (a 7% increase) in operating income of the ETG to a record $83.1 million for fiscal 2013, up from $77.4 million for fiscal 2012, partially offset by a $3.4 million increase in corporate expenses. The increase in the operating income of the FSG is principally attributed to the previously mentioned net sales growth. The increase in the operating income of the ETG reflects the previously mentioned improved gross profit margin and net sales growth.

As a percentage of net sales, our consolidated operating income was 18.2% for both fiscal 2013 and fiscal 2012 despite operating margin improvements of .3% and .2% within the ETG and FSG, respectively, as the FSG, and its lower operating income as a percentage of net sales relative to the ETG, accounted for a larger percentage of our consolidated net sales for fiscal 2013 as compared to fiscal 2012. The ETG's operating income as a percentage of net sales increased from 23.4% in fiscal 2012 to 23.7% in fiscal 2013 reflecting the previously mentioned improved gross profit margin partially offset by an increase in SG&A expenses as a percentage of net sales. The FSG's operating income as a percentage of net sales increased from 18.2% in fiscal 2012 to 18.4% in fiscal 2013 reflecting the previously mentioned improved gross profit margin.

Interest Expense

Interest expense increased to $3.7 million in fiscal 2013, up from $2.4 million in fiscal 2012. The increase was principally due to a higher weighted average balance outstanding under our revolving credit facility during fiscal 2013 associated with recent acquisitions and borrowings made to fund an aggregate $1.76 per share cash dividend paid in December 2012.

Other Income

Other income in fiscal 2013 and 2012 was not material.

Income Tax Expense

Our effective tax rate in fiscal 2013 decreased to 31.1% from 33.8% in fiscal 2012. The decrease is partially due to an income tax credit for qualified research and development activities for the last ten months of fiscal 2012 that was recognized in the first quarter of fiscal 2013 pursuant to the retroactive extension of Section 41 of the Internal Revenue Code, "Credit for

Increasing Research Activities," in January 2013 to cover a two-year period from January 1, 2012 to December 31, 2013. The decrease in the effective tax rate was also attributed to the benefit from higher tax-exempt unrealized gains in the cash surrender values of life insurance policies related to the HEICO Corporation Leadership Compensation Plan and an income tax deduction under Section 404(k) of the Internal Revenue Code for the one-time special and extraordinary cash dividend paid in December 2012 to participants of the HEICO Savings and Investment Plan holding HEICO common stock.

For a detailed analysis of the provision for income taxes, see Note 6, Income Taxes, of the Notes to Consolidated Financial Statements.

Net Income Attributable to Noncontrolling Interests

Net income attributable to noncontrolling interests relates to the 20% noncontrolling interest held by Lufthansa Technik AG in HEICO Aerospace and the noncontrolling interests held by others in certain subsidiaries of the FSG and ETG. Net income attributable to noncontrolling interests was $22.2 million in fiscal 2013 compared to $21.5 million in fiscal 2012. The increase for fiscal 2013 reflects the aggregate impact of higher earnings of FSG and ETG subsidiaries in which noncontrolling interests are held, partially offset by our purchases of certain noncontrolling interests during fiscal 2013 and 2012 resulting in lower allocations of net income to noncontrolling interests.

Net Income Attributable to HEICO

Net income attributable to HEICO increased to a record $102.4 million, or $1.53 per diluted share, in fiscal 2013, up from $85.1 million, or $1.28 per diluted share, in fiscal 2012, principally reflecting the previously mentioned increased operating income and the favorable tax benefits recognized during fiscal 2013.

Outlook

As we look ahead to fiscal 2014, we anticipate continued organic growth within our product lines that serve the commercial aviation markets. We expect overall organic growth within the Electronic Technologies Group reflecting higher demand for the majority of our products moderated by lower demand for certain of our defense products attributable to continued uncertainty regarding the United States of America budget cuts. During fiscal 2014, we will continue our focus on developing new products and services, further market penetration, additional acquisition opportunities and maintaining our financial strength.  Overall, we are targeting growth in fiscal 2014 full year net sales and net income over fiscal 2013 levels.

Net Sales

Our net sales in fiscal 2012 increased by 17% to a record $897.3 million, as compared to net sales of $764.9 million in fiscal 2011. The increase in net sales reflects an increase of $103.8 million (a 46% increase) to a record $331.6 million in net sales within the ETG as well as an increase of $30.8 million (a 6% increase) to a record $570.3 million in net sales within the FSG.

The net sales increase in the ETG reflects additional net sales of approximately $87.4 million from the acquisitions of 3D Plus in September 2011, Switchcraft in November 2011, Ramona Research in March 2012 and Moritz Aerospace in April 2012, as well as organic growth of approximately 7%. The organic growth in the ETG principally reflects an increase in demand and market penetration for certain defense, space, electronic, aerospace and medical products, resulting in a $6.2 million, $3.5 million, $2.6 million, $2.1 million and $1.8 million increase in net sales from these product lines, respectively. The net sales increase in the FSG reflects organic growth of approximately 4%, as well as additional net sales of approximately $9.1 million from the acquisitions of Blue Aerospace in December 2010, CSI Aerospace in August 2012 and Action Research in October 2012. The FSG's organic growth reflects increased market penetration from both new and existing product offerings for certain of the FSG's aerospace products and services resulting in an increase of $11.3 million in net sales of which approximately 70% and 30% were attributed to the aftermarket replacement parts product lines and repair and overhaul services product lines, respectively. Additionally, the organic growth in the FSG reflects an increase of $10.3 million in net sales within our specialty product lines primarily attributed to the sales of industrial products used in heavy-duty and off-road vehicles as a result of increased market penetration. Sales price changes were not a significant contributing factor to the ETG and FSG net sales growth in fiscal 2012.

Our net sales in fiscal 2012 and 2011 by market approximated 53% and 60%, respectively, from the commercial aviation industry, 26% and 24%, respectively, from the defense and space industries, and 21% and 16%, respectively, from other industrial markets including medical, electronics and telecommunications.

Gross Profit and Operating Expenses

Our consolidated gross profit margin improved to 36.5% in fiscal 2012 as compared to 35.9% in fiscal 2011, principally reflecting a .7% increase in the FSG's gross profit margin, partially offset by a 2.5% decrease in the ETG's gross profit margin. The increase in the FSG's gross profit margin is primarily attributed to the previously mentioned increased sales of higher gross profit margin products within our aftermarket replacement parts and repair and overhaul services product lines. The decrease in the ETG's gross profit margin principally reflects a 1.9% impact from lower gross profit margins realized by Switchcraft and 3D Plus in fiscal 2012. The lower gross profit margins realized by these acquired businesses are principally attributed to amortization expense of certain acquired intangible assets and inventory purchase accounting adjustments aggregating approximately $4.0 million. Additionally, the decrease in the ETG's gross profit margin reflects a lower margin product mix of certain of our defense, space and

medical products in fiscal 2012. Total new product research and development expenses included within our consolidated cost of sales increased from approximately $25.4 million in fiscal 2011 to approximately $30.4 million in fiscal 2012, principally to further enhance growth opportunities and market penetration.

SG&A expenses were $164.1 million and $136.0 million in fiscal 2012 and 2011, respectively. The increase in SG&A expenses reflects an increase of $17.7 million in general and administrative expenses and $10.4 million in selling expenses, of which $16.3 million in general and administrative expenses and $7.6 million in selling expenses were attributed to the acquired businesses. SG&A expenses as a percentage of net sales increased from 17.8% in fiscal 2011 to 18.3% in fiscal 2012 principally reflecting an increase in amortization expense of intangible assets from the acquired businesses.

Operating Income

Operating income for fiscal 2012 increased by 18% to a record $163.3 million as compared to operating income of $138.4 million for fiscal 2011. The increase in operating income reflects an $18.0 million increase (a 30% increase) to a record $77.4 million in operating income of the ETG for fiscal 2012, up from $59.5 million in fiscal 2011 and an $8.9 million increase (a 9% increase) in operating income of the FSG to a record $103.9 million for fiscal 2012, up from $95.0 million for fiscal 2011, partially offset by a $2.0 million increase in corporate expenses. The increase in the operating income of the ETG is principally due to the acquired businesses and the previously mentioned increased sales volumes. The increase in the operating income of the FSG principally reflects the previously mentioned increased sales volumes and improved gross profit margin.

As a percentage of net sales, our consolidated operating income increased to 18.2% for fiscal 2012, up from 18.1% for fiscal 2011. The increase in consolidated operating income as a percentage of net sales reflects an increase in the FSG's operating income as a percentage of net sales from 17.6% for fiscal 2011 to 18.2% for fiscal 2012, partially offset by a decrease in the ETG's operating income as a percentage of net sales from 26.1% in fiscal 2011 to 23.4% in fiscal 2012. The increase in operating income as a percentage of net sales for the FSG principally reflects the previously mentioned higher gross profit margin. The decrease in operating income as a percentage of net sales for the ETG principally reflects a 3.9% impact from lower operating margins realized by Switchcraft and 3D Plus. The lower operating margins realized by Switchcraft and 3D Plus are principally attributed to amortization expense associated with intangible assets and inventory purchase accounting adjustments aggregating approximately $10.6 million during fiscal 2012.

Interest Expense

Interest expense increased to $2.4 million for fiscal 2012 from $.1 million for fiscal 2011. The increase was principally due to a higher weighted average balance outstanding under our revolving credit facility in fiscal 2012 associated with the recent acquisitions.

Other Income

Other income in fiscal 2012 and 2011 was not material.

Income Tax Expense

The Company's effective tax rate increased to 33.8% for fiscal 2012 from 31.0% for fiscal 2011. The change in the effective tax rate is primarily attributed to the retroactive extension of Section 41 of the Internal Revenue Code, "Credit for Increasing Research Activities," to cover the period from January 1, 2010 to December 31, 2011, which resulted in the recognition of an income tax credit for qualified research and development activities for the last ten months of fiscal 2010 in the first quarter of fiscal 2011 and reduced the recognition of such income tax credit to just the first two months of qualifying research and development activities in fiscal 2012. In addition, the Company purchased certain noncontrolling interests during fiscal 2011 and 2012 that contributed to the comparative increase in the effective tax rate for fiscal 2012. Further, the increase also reflects a higher effective state income tax rate principally because the prior year includes a benefit from state income apportionment updates recognized upon the filing of the Company's fiscal 2010 state tax returns and the amendment of certain prior year state tax returns in the third quarter of fiscal 2011 and the current year includes the effect of a fiscal 2012 acquisition and changes in certain state tax laws which impacted state apportionment factors.

For a detailed analysis of the provision for income taxes, see Note 6, Income Taxes, of the Notes to Consolidated Financial Statements.

Net Income Attributable to Noncontrolling Interests

Net income attributable to noncontrolling interests relates to the 20% noncontrolling interest held by Lufthansa Technik AG in HEICO Aerospace and the noncontrolling interests held by others in certain subsidiaries of the FSG and ETG.  Net income attributable to noncontrolling interests was $21.5 million in fiscal 2012 compared to $22.6 million in fiscal 2011.  The decrease in fiscal 2012 principally reflects our purchases of certain noncontrolling interests during fiscal 2011 and 2012 resulting in lower allocations of net income to noncontrolling interests. Additionally, the decrease is attributed to lower earnings of certain ETG and FSG subsidiaries, partially offset by higher earnings of the FSG in which the 20% noncontrolling interest is held.

Net Income Attributable to HEICO

Net income attributable to HEICO was a record $85.1 million, or $1.28 per diluted share, in fiscal 2012 compared to $72.8 million, or $1.10 per diluted share, in fiscal 2011 principally reflecting the increased operating income referenced above.

We have generally experienced increases in our costs of labor, materials and services consistent with overall rates of inflation.  The impact of such increases on net income attributable to HEICO has been generally minimized by efforts to lower costs through manufacturing efficiencies and cost reductions.

Our principal uses of cash include acquisitions, cash dividends, capital expenditures, distributions to noncontrolling interests and working capital needs.  Capital expenditures in fiscal 2014 are anticipated to approximate $25 million. We finance our activities primarily from our operating activities and financing activities, including borrowings under long-term credit agreements.

Recent Developments

On November 22, 2013, we entered into an amendment to extend the maturity date of our revolving credit facility by one year to December 2018 and to increase the aggregate principal amount to $800 million. Furthermore, the amendment includes a feature that will allow us to increase the aggregate principal amount by an additional $200 million, at our option, to become a$1.0 billion facility through increased commitments from existing lenders or the addition of new lenders.

As of December 17, 2013, we had approximately $431 million of unused availability under the terms of our revolving credit facility. Based on our current outlook, we believe that our net cash provided by operating activities and available borrowings under our revolving credit facility will be sufficient to fund cash requirements for at least the next twelve months.

Operating Activities

Net cash provided by operating activities was $131.8 million in fiscal 2013 and consisted primarily of net income from consolidated operations of $124.6 million and depreciation and amortization of $36.8 million (a non-cash item), partially offset by an increase in working capital

(current assets minus current liabilities) of $30.9 million. The increase in working capital was principally attributed to increases in accounts receivable and inventory as a result of net sales growth during the period. Net cash provided by operating activities decreased by $6.7 million in fiscal 2013 from $138.6 million in fiscal 2012. The decrease in cash provided by operating activities is principally attributed to a $27.8 million increase in working capital reflecting increases in accounts receivable of $10.8 million and inventories of $7.4 million as a result of net sales growth, a $9.0 million decrease in income taxes payable due to the timing of estimated payments and a $3.0 million increase in our deferred tax benefit, partially offset by a $17.9 million and $6.1 million increase in net income from consolidated operations and depreciation and amortization, respectively.

Net cash provided by operating activities was $138.6 million for fiscal 2012, principally reflecting net income from consolidated operations of $106.7 million, depreciation and amortization of $30.7 million and stock option compensation expense of $3.9 million, partially offset by an increase in working capital (current assets minus current liabilities) of $3.1 million. The increase in working capital of $3.1 million primarily reflects a build in inventory levels to meet customer demand and increased accounts receivable related to higher net sales in fiscal 2012, partially offset by the timing of certain payments pertaining to fiscal 2012 accruals and payables. Net cash provided by operating activities increased by $13.1 million from $125.5 million in fiscal 2011. The increase in net cash provided by operating activities is principally due to a $12.1 million increase in depreciation and amortization expense principally related to the fiscal 2012 and 2011 acquisitions and an $11.2 million increase in net income from consolidated operations, partially offset by a $7.3 million increase in net operating assets and a $5.0 million decrease in impairment losses of certain intangible assets.

Net cash provided by operating activities was $125.5 million in fiscal 2011, principally reflecting net income from consolidated operations of $95.5 million, depreciation and amortization of $18.5 million, impairment losses of certain intangible assets aggregating $5.0 million, a decrease in working capital (current assets minus current liabilities) of $4.1 million, and stock option compensation expense of $2.6 million.

Investing Activities

Net cash used in investing activities during the three-year fiscal period ended October 31, 2013 primarily relates to several acquisitions aggregating $514.6 million, including $222.6 million in fiscal 2013, $197.3 million in fiscal 2012, and $94.7 million in fiscal 2011.  Further details on acquisitions may be found at the beginning of this Item 7 under the caption "Overview" and Note 2, Acquisitions, of the Notes to Consolidated Financial Statements.  Capital expenditures aggregated $43.0 million over the last three fiscal years, primarily reflecting the expansion, replacement and betterment of existing production facilities and capabilities, which were generally funded using cash provided by operating activities.

Financing Activities

Net cash provided by financing activities was $103.2 million in fiscal 2013 and $78.4 million in fiscal 2012 and net cash used in financing activities was $10.7 million in fiscal 2011. During the three-year fiscal period ended October 31, 2013, we borrowed an aggregate $635.0 million under our revolving credit facility principally to fund acquisitions and a special and extraordinary cash dividend paid in fiscal 2013, including $372.0 million in fiscal 2013, $191.0 million in fiscal 2012, and $72.0 million in fiscal 2011.  Further details on acquisitions may be found at the beginning of this Item 7 under the caption "Overview" and Note 2, Acquisitions, of the Notes to Consolidated Financial Statements. Payments on the revolving credit facility aggregated $276.0 million over the last three fiscal years, including $126.0 million in fiscal 2013, $100.0 million in fiscal 2012, and $50.0 million in fiscal 2011. In December 2012, we paid a special and extraordinary cash dividend on both classes of HEICO common stock aggregating $113.5 million. For the three-year fiscal period ended October 31, 2013, we made distributions to noncontrolling interest owners aggregating $31.6 million, acquired certain noncontrolling interests aggregating $31.5 million, redeemed common stock related to stock option exercises aggregating $17.0 million, paid regular semi-annual cash dividends aggregating $17.0 million, and paid revolving credit facility issuance costs of $3.6 million. For the three-year fiscal period ended October 31, 2013, we received proceeds from stock option exercises aggregating $3.5 million.  Net cash provided by financing activities also includes the presentation of an excess tax benefit from stock option exercises aggregating $23.6 million for the three-year fiscal period ended October 31, 2013.

In December 2011, we entered into a $670 million Revolving Credit Agreement ("Credit Facility") with a bank syndicate. The Credit Facility may be used for our working capital and general corporate needs, including capital expenditures and to finance acquisitions. In November 2013, we extended the maturity date of the Credit Facility by one year to December 2018 and increased the aggregated principal amount to $800 million. The Credit Facility also includes a feature that will allow us to increase the aggregate principal amount by an additional $200 million to become a $1.0 billion facility through increased commitments from existing lenders or the addition of new lenders.

Advances under the Credit Facility accrue interest at our choice of the "Base Rate" or the London Interbank Offered Rate ("LIBOR") plus applicable margins (based on the Company's ratio of total funded debt to earnings before interest, taxes, depreciation and amortization, noncontrolling interests and non-cash charges, or "leverage ratio"). The Base Rate is the highest of (i) the Prime Rate; (ii) the Federal Funds rate plus .50% per annum; and (iii) the Adjusted LIBO Rate determined on a daily basis for an Interest Period of one month plus 1.00% per annum, as such capitalized terms are defined in the Credit Facility. The applicable margins for LIBOR-based borrowings range from .75% to 2.25%. The applicable margins for Base Rate borrowings range from 0% to 1.25%. A fee is charged on the amount of the unused commitment ranging from .125% to .35% (depending on our leverage ratio). The Credit Facility also includes a $50 million sublimit for borrowings made in foreign currencies, letters of credit and swingline borrowings. Outstanding principal, accrued and unpaid interest and other amounts payable under the Credit Facility may be accelerated upon an event of default, as such events are described in

the Credit Facility. The Credit Facility is unsecured and contains covenants that restrict the amount of certain payments, including dividends, and require, among other things, the maintenance of a total leverage ratio, a senior leverage ratio and a fixed charge coverage ratio. In the event our leverage ratio exceeds a specified level, the Credit Facility would become secured by the capital stock owned in substantially all of our subsidiaries. As of October 31, 2013, we were in compliance with all financial and nonfinancial covenants. See Note 5, Long-Term Debt, of the Notes to Consolidated Financial Statements for further information regarding the Credit Facility.

The following table summarizes our contractual obligations as of October 31, 2013 (in thousands):

__________________

an adjustment to the Redemption Amount of a fiscal 2013 acquisition of redeemable noncontrolling interests. All other Redemption Amounts have been excluded from the table as the timing of such payments is contingent upon the exercise of the Put Rights. See Note 12, Redeemable Noncontrolling Interests, of the Notes to Consolidated Financial Statements for additional information.

Guarantees

We have arranged for a standby letter of credit in the amount of $1.5 million to meet the security requirement of our insurance company for potential workers' compensation claims, which is supported by our revolving credit facility.

In June 2011, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update ("ASU") 2011-05, "Presentation of Comprehensive Income," which requires the presentation of total comprehensive income, the components of net income and the components of other comprehensive income in either a single continuous statement of comprehensive income or in two separate, but consecutive statements. ASU 2011-05 eliminates the option to present other comprehensive income and its components in the statement of shareholders' equity. We adopted ASU 2011-05 in the first quarter of fiscal 2013 and elected to make the presentation in two separate, but consecutive statements, which had no impact on our consolidated results of operations, financial position or cash flows.

In September 2011, the FASB issued ASU 2011-08, "Testing Goodwill for Impairment,"

which is intended to reduce the complexity and cost of performing a quantitative test for impairment of goodwill by permitting an entity the option to perform a qualitative evaluation about the likelihood of goodwill impairment in order to determine whether it should calculate the fair value of a reporting unit. The update also improves previous guidance by expanding upon the examples of events and circumstances that an entity should consider between annual impairment tests in determining whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount. We adopted ASU 2011-08 in the fourth quarter of fiscal 2013 but elected to perform a quantitative analysis when performing our fiscal 2013 impairment test. The adoption of this guidance had no impact on our consolidated results of operations, financial position or cash flows.

In February 2013, the FASB issued ASU 2013-02, "Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income," which requires disclosure about changes in and amounts reclassified out of accumulated other comprehensive income by component. In addition, an entity is required to present, either on the face of the statement of operations or in the notes, significant amounts reclassified out of accumulated other comprehensive income by

the respective line items of net income, but only if the amount reclassified is required to be reclassified to net income in its entirety in the same reporting period. For amounts that are not required to be reclassified in their entirety to net income, an entity is required to cross-reference to other disclosures that provide additional detail about those amounts. ASU 2013-02 is effective prospectively for fiscal years and interim periods within those fiscal years beginning after December 15, 2012, or in fiscal 2014 for HEICO. Early adoption is permitted. The adoption of this guidance is not expected to have a material impact on our consolidated results of operations, financial position or cash flows.

In March 2013, the FASB issued ASU 2013-05, "Parent's Accounting for the Cumulative Translation Adjustment upon Derecognition of Certain Subsidiaries or Groups of Assets within a Foreign Entity or of an Investment in a Foreign Entity," which clarifies the applicable guidance for the release of any cumulative translation adjustments into net earnings. ASU 2013-05 specifies that the entire amount of cumulative translation adjustments should be released into earnings when an entity ceases to have a controlling financial interest in a subsidiary or group of assets within a consolidated foreign entity and the sale or transfer results in the complete or substantially complete liquidation of the investment in the foreign entity. ASU 2013-05 is effective prospectively for fiscal years and interim reporting periods within those years beginning after December 15, 2013, or in fiscal 2015 for HEICO. Early adoption is permitted. We are currently evaluating the effect, if any, the adoption of this guidance will have on our consolidated results of operations, financial position or cash flows.

Certain statements in this report constitute "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. All statements contained herein that are not clearly historical in nature may be forward-looking and the words "expect," "anticipate," "believe," "estimate" and similar expressions are generally intended to identify forward-looking statements. Any forward-looking statement contained herein, in press releases, written statements or other documents filed with the Securities and Exchange Commission or in communications and discussions with investors and analysts in the normal course of business through meetings, phone calls and conference calls, concerning our operations, economic performance and financial condition are subject to risks, uncertainties and contingencies. We have based these forward-looking statements on our current expectations and projections about future events. All forward-looking statements involve risks and uncertainties, many of which are beyond our control, which may cause actual results, performance or achievements to differ materially from anticipated results, performance or achievements. Also, forward-looking statements are based upon management's estimates of fair values and of future costs, using currently available information. Therefore, actual results may differ materially from those expressed or implied in those statements. Factors that could cause such differences include:

For further information on these and other factors that potentially could materially affect our financial results, see Item 1A, Risk Factors.  We undertake no obligation to publicly update or revise any forward-looking statement, whether as a result of new information, future events or otherwise, except to the extent required by applicable law.

The primary market risk to which we have exposure is interest rate risk, mainly related to our revolving credit facility, which has variable interest rates.  Interest rate risk associated with our variable rate debt is the potential increase in interest expense from an increase in interest rates.  Based on our aggregate outstanding variable rate debt balance of $373 million as of October 31, 2013, a hypothetical 10% increase in interest rates would not have a material effect on our results of operations, financial position or cash flows.

We maintain a portion of our cash and cash equivalents in financial instruments with original maturities of three months or less.  These financial instruments are subject to interest rate risk and will decline in value if interest rates increase.  Due to the short duration of these financial instruments, a hypothetical 10% increase in interest rates as of October 31, 2013 would not have a material effect on our results of operations, financial position or cash flows.

We are also exposed to foreign currency exchange rate fluctuations on the United States dollar value of our foreign currency denominated transactions, which are principally in Euros, Canadian dollars and British pounds sterling.  A hypothetical 10% weakening in the exchange rate of the Euro, Canadian dollar or British pound sterling to the United States dollar as of October 31, 2013 would not have a material effect on our results of operations, financial position or cash flows.

To the Board of Directors and Shareholders of

HEICO Corporation

Hollywood, Florida

We have audited the accompanying consolidated balance sheets of HEICO Corporation and subsidiaries (the "Company") as of October 31, 2013 and 2012, and the related consolidated statements of operations, comprehensive income, shareholders' equity, and cash flows for each of the three years in the period ended October 31, 2013. Our audits also included the financial statement schedule listed in the Index at Item 15. These financial statements and financial statement schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on the financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of HEICO Corporation and subsidiaries as of October 31, 2013 and 2012, and the results of their operations and their cash flows for each of the three years in the period ended October 31, 2013, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company's internal control over financial reporting as of October 31, 2013, based on the criteria established in Internal Control - Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated December 19, 2013 expressed an unqualified opinion on the Company's internal control over financial reporting.

/s/ DELOITTE & TOUCHE LLP

Certified Public Accountants

Miami, Florida

December 19, 2013