_________________________________

_________________________________

(MARK ONE)

x QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended December 31, 2017

OR

o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

FOR THE TRANSITION PERIOD FROM              TO             

Commission file number 001-34717

__________________________

(Exact name of Registrant as Specified in its Charter)

Clarendon House, 2 Church Street

Hamilton HM 11, Bermuda

(Address of Principal Registered

Offices including Zip Code)

(408) 830-9742

(Registrant's Telephone Number, Including Area Code)

__________________________________________

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes   x     No   o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes   x      No   o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company or an emerging growth company. See definitions of "large accelerated filer," "accelerated filer", "smaller reporting company", and "emerging growth company" in Rule 12b-2 of the Exchange Act. (Check one):

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes   o     No   x

Number of common shares outstanding as of January 31, 2018: 23,948,076

Alpha and Omega Semiconductor Limited

Form 10-Q

Fiscal First Quarter Ended December 31, 2017

TABLE OF CONTENTS

PART I. FINANCIAL INFORMATION

ITEM 1. FINANCIAL STATEMENTS

See accompanying notes to these condensed consolidated financial statements.

See accompanying notes to these condensed consolidated financial statements.

See accompanying notes to these condensed consolidated financial statements.

See accompanying notes to these condensed consolidated financial statements.

1. The Company and Significant Accounting Policies

The Company

Alpha and Omega Semiconductor Limited and its subsidiaries (the "Company," "AOS," "we" or "us") design, develop and supply a broad range of power semiconductors. The Company's portfolio of products targets high-volume applications, including personal computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment. The Company conducts its operations primarily in the United States of America ("USA"), Hong Kong, China, Taiwan, Korea, Germany and Japan.

Basis of Preparation

The accompanying unaudited condensed consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States ("U.S. GAAP") for interim financial information and with the instructions to Article 10 of Securities and Exchange Commission Regulation S-X, as amended. They do not include all information and footnotes necessary for a fair presentation of financial position, results of operations and cash flows in conformity with U.S. GAAP for complete financial statements. These condensed consolidated financial statements should be read in conjunction with the consolidated financial statements and related notes contained in the Company's Annual Report on Form 10-K for the fiscal year ended June 30, 2017 . All significant intercompany balances and transactions have been eliminated in consolidation. In the opinion of management, all adjustments (consisting of normal recurring adjustments and accruals) considered necessary for a fair presentation of the results of operations for the periods presented have been included in the interim periods. Operating results for the six months ended December 31, 2017 are not necessarily indicative of the results that may be expected for the fiscal year ending June 30, 2018 . The condensed consolidated balance sheet at June 30, 2017 is derived from the audited financial statements included in the Company's Annual Report on Form 10-K for the fiscal year ended June 30, 2017 .

Joint Venture

In March 2016, the Company executed an agreement with two strategic investment funds owned by the Municipality of Chongqing, China (the "Chongqing Funds") to form a joint venture for a new state-of-the-art power semiconductor packaging, testing and wafer fabrication facility in Liangjiang New Area of Chongqing (the "Joint Venture"). The initial capitalization of the Joint Venture under the agreement is $330.0 million , which includes cash contributions from the Chongqing Funds and contributions of cash, equipment and intangible assets from the Company. The Company owns 51% and the Chongqing Funds own 49% of the equity interest of the Joint Venture. The Joint Venture is accounted under the provisions of the consolidation guidance since the Company has a controlling financial interest.

Use of Estimates

The preparation of the condensed consolidated financial statements in conformity with U.S. GAAP requires the Company to make estimates, judgments and assumptions that affect the reported amounts of assets, liabilities, revenue and expenses. To the extent there are material differences between these estimates and actual results, the Company's condensed consolidated financial statements will be affected. On an ongoing basis, the Company evaluates the estimates, judgments and assumptions including those related to stock rotation returns, price adjustments, allowance for doubtful accounts, inventory reserves, warranty accrual, income taxes, share-based compensation, and useful lives for property, plant and equipment and intangible assets.

Fair Value of Financial Instruments

The fair values of cash equivalents are based on observable market prices and have been categorized in Level 1 in the fair value hierarchy. Cash equivalents consist primarily of short term bank deposits. The carrying values of financial instruments such as cash and cash equivalents, accounts receivable and accounts payable approximate their carrying values due to their short-term maturities.

Comprehensive Income (Loss)

Comprehensive income (loss) is defined as the change in equity of a business enterprise during a period from transactions and other events and circumstances from non-owner sources. The Company's accumulated other comprehensive income (loss) consists of cumulative foreign currency translation adjustments. Total comprehensive income (loss) is presented in the condensed consolidated statements of comprehensive income (loss).

Recent Accounting Pronouncements

In May 2017, the FASB issued Accounting Standard Updates ("ASU") ASU 2017-09, "Compensation -Stock Compensation: Scope of Modification Accounting ("ASU 2017-09"). ASU 2017-09 is an update to the existing guidance to clarify when modification accounting would be applied for a change to the terms or conditions of a share-based award. Under this new guidance, modification accounting is required only if the fair value, the vesting conditions, or the classification of the award changes as a result of the change in terms or conditions. This ASU will be effective for annual periods, and interim periods within those annual periods, beginning after December 15, 2017 with early adoption permitted. The Company does not regularly modify the terms and conditions of its share-based awards and does not expect the adoption of this guidance to have a significant impact on its financial statements.

In November 2016, the FASB issued ASU 2016-18, "Statement of Cash Flows: Restricted Cash ("ASU 2016-18"). ASU 2016-18 requires amounts generally described as restricted cash and restricted cash equivalents be included with cash and cash equivalents when reconciling the total beginning and ending amounts for the periods shown on the statement of cash flows. This ASU will be effective for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years, with early adoption permitted and requires retrospective adoption.  The Company does not expect the adoption of this guidance will have a material impact on its consolidated financial position, results of operations or cash flows.

In August 2016, the FASB issued ASU No. 2016-15, "Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments ("ASU 2016-15"). ASU 2016-15 identifies how certain cash receipts and cash payments are presented and classified in the Statement of Cash Flows under Topic 230. ASU 2016-15 is effective for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years, with early adoption permitted.  Upon adoption, entities must apply the guidance retrospectively to all periods presented. The Company is currently evaluating the impact the adoption of ASU 2016-15 will have on its consolidated financial statements.

In February 2016, the FASB issued ASU 2016-02, Leases. This guidance requires a dual approach for lessee accounting under which a lessee will account for leases as finance leases or operating leases. Both finance and operating leases will result in the lessee recognizing a right-of-use asset and a corresponding liability on its balance sheet, with differing methodology for income statement recognition. This guidance is effective for public business entities for fiscal years, and interim periods within those years, beginning after December 15, 2018, and early adoption is permitted. A modified retrospective approach is required for all leases existing or entered into after the beginning of the earliest comparative period in the consolidated financial statements. The Company is currently assessing the impact that adoption of this guidance will have on its consolidated financial statements.

In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers. The standard provides companies with a single model for use in accounting for revenue arising from contracts with customers and supersedes current revenue recognition guidance, including industry-specific revenue guidance. The core principle of the model is to recognize revenue when control of the goods or services transfers to the customer, as opposed to recognizing revenue when the risks and rewards transfer to the customer under the existing revenue guidance. The Company will adopt the new revenue standards in its first quarter of fiscal year 2019 utilizing the modified retrospective method. The Company is still in the process of completing its analysis on the transition of all revenue from distributors from sell-through to the sell-in basis of accounting, as well as impact of related disclosures and its internal controls over financial reporting.

2. Net Income Per Common Share Attributable to Alpha and Omega Semiconductor Limited

3. Concentration of Credit Risk and Significant Customers

The Company manages its credit risk associated with exposure to distributors and direct customers on outstanding accounts receivable through the application and review of credit approvals, credit ratings and other monitoring procedures. In some instances, the Company also obtains letters of credit from certain customers.

Credit sales, which are mainly on credit terms of 30 to 60 days , are only made to customers who meet the Company's credit requirements, while sales to new customers or customers with low credit ratings are usually made on an advance payment basis. The Company considers its trade accounts receivable to be of good credit quality because its key distributors and direct customers have long-standing business relationships with the Company and the Company has not experienced any significant write-offs of accounts receivable in the past. The Company closely monitors the aging of accounts receivable from its distributors and direct customers, and regularly reviews their financial positions, when available.

Summarized below are individual customers whose revenue or accounts receivable balances were more than 10% of the respective total consolidated amounts:

* Less than 10%

4. Balance Sheet Components

Accounts receivable, net:

Inventories:

Property, plant and equipment, net:

Intangible assets, net:

Intangible assets of license fees are primarily related to a license agreement that the Company entered into with STMicroelectronics International N.V. ("STMicro") on September 5, 2017, pursuant to which STMicro granted the Company a world-wide, royalty-free and fully-paid license to use its technologies to develop, market and distribute certain digital multi-phase controller products, which have been offered by STMicro.  This agreement allows the Company to develop and market products in a new market, primarily in the computer server segment. Under the license agreement, the Company agreed to pay a total price in cash of $17.0 million based on the payment schedule of, approximately $10.1 million , $6.7 million , $0.2 million in calendar year 2017, 2018 and 2019, respectively. As of December 31, 2017 , the Company recorded $13.8 million in intangible assets, of which $9.8 million in cash was paid to STMicro. The Company begins amortizing such license fees when the technology has met the Company's qualification.

Other long-term assets:

Accrued liabilities:

The activities in the warranty accrual, included in accrued liabilities, are as follows:

* Released a specific warranty reserve of approximately $1.0 million due to expired warranty period.

The activities in the stock rotation accrual, included in accrued liabilities, are as follows:

5. Debt

On August 15, 2017, the Company's Oregon subsidiary, Jireh Semiconductor Incorporated ("Jireh"), entered into a credit agreement with a financial institution (the "Bank") that provides a term loan in an amount up to $30.0 million for the purpose of purchasing certain equipment for our fabrication facility located in Oregon.  The obligation under the credit agreement is secured by substantially all assets of Jireh and guaranteed by the Company.  The credit agreement has a five -year term and matures on August 15, 2022. On January 12, 2018, Jireh drew down the loan in the amount of $13.2 million .  Beginning of September 2018, Jireh is required to pay to the Bank on each payment date, the outstanding principal amount of the loan in monthly installments.  The loan accrues interest based on an adjusted London Interbank Offered Rate ("LIBOR") as defined in the credit agreement, plus specified applicable margin in the range of 1.75% to 2.25% , based on the outstanding balance of the loan.  The credit agreement contains customary restrictive covenants and includes certain financial covenants that require the Company to maintain, on a consolidated basis, specified financial ratios and fixed charge coverage ratio. As of December 31, 2017 , the Company recorded approximately $0.1 million of transaction costs.

6. Joint Venture

On March 29, 2016, the Company entered into a joint venture contract (the "JV Agreement") with two investment funds owned by the Municipality of Chongqing (the "Chongqing Funds"), pursuant to which the Company and the Chongqing Funds formed a joint venture, (the "JV Company"), for the purpose of constructing and operating a power semiconductor packaging, testing and 12-inch wafer fabrication facility in the Liangjiang New Area of Chongqing, China (the "JV Transaction"). The total initial capitalization of the JV Company is $330.0 million (the "Initial Capitalization"), which includes cash contribution from the Chongqing Funds and contributions of cash, equipment and intangible assets from the Company.  The Initial Capitalization is expected to be completed in stages.  The Company owns 51% , and the Chongqing Funds own 49% , of the equity interest in the JV Company. If both parties agree that the termination of the JV Company is in the best interest of each party or the JV Company is bankrupt or insolvent where either party may terminate early, after paying the debts of the JV Company, the remaining assets of the JV Company shall be paid to the Chongqing Funds to cover the principal of its total paid-in contributions plus interest at 10% simple annual rate prior to distributing the balance of the JV Company's assets to the Company. The Company expects the JV Company to commence initial production in mid-calendar year 2018.

There is no private land ownership in China. Individuals and companies are permitted to acquire land use rights for specific purpose. In September 2016, the JV Company paid approximately $8.7 million for land use rights to build the manufacturing facility. In March 2017, the JV Company received the necessary land use right certificate from the PRC government. The land use rights will expire on November 30, 2066.

As part of the JV Transaction, the JV Company entered into an Engineering, Procurement and Construction Contract (the "EPC Contract") with The IT Electronics Eleventh Design & Research Institute Scientific and Technological Engineering Corporation Limited (the "Contractor"), effective as of January 10, 2017 (the "Effective Date"), pursuant which the Contractor was engaged to construct the manufacturing facility contemplated under the JV Agreement. Under the EPC Contract, the Contractor's obligations include, but are not limited to: (i) the development of conceptual design, initial design, construction drawing design and optimization, and submission of such designs to the JV Company for examination and confirmation; and (ii) the construction of the assembly and wafer fabrication facilities and related procurement services, including the selection and engagement of subcontractors, in accordance with a construction schedule agreed upon by the parties. The total price payable under the EPC Contract is Chinese Renminbi (RMB) 540.0 million, or approximately $78.0 million based on the currency exchange rate between RMB and U.S. Dollars on the Effective Date, which consists of $2.8 million (RMB 19.5 million) of design fees ("Design Fees") and $75.2 million (RMB 520.5 million) of construction and procurement fees (including compliance with safety and aesthetic requirements) ("Construction Fees"). The payment is subject to volatility as a result of exposure to fluctuations in RMB foreign exchange rates. The Design Fees and Construction Fees are paid by the JV Company pursuant to a payment schedule based on the progress of the construction and the achievements of specified milestones. As of December 31, 2017, the JV Company paid approximately $37.0 million (RMB 243.8 million ), and expects to pay the remaining of $44.9 million (RMB 296.2 million ) in calendar year 2018.

The changes in total stockholders' equity and noncontrolling interest were as follows (in thousands):

7. Shareholders' Equity and Share-based Compensation

Share Repurchase

In September 2017, the Board of Directors terminated the repurchase program that was previously approved in 2015 and approved a new repurchase program (the "Repurchase Program"), which allows the Company to repurchase its common shares from the open market pursuant to a pre-established Rule 10b5-1 trading plan or through privately negotiated transactions up to an aggregate of $30.0 million . The amount and timing of any repurchases under the Repurchase Program depend on a number of factors, including but not limited to, the trading price, volume and availability of the Company's common shares. Shares repurchased under this program are accounted for as treasury shares and the total cost of shares repurchased is recorded as a reduction of shareholders' equity.

During the six months ended December 31, 2017 , the Company repurchased an aggregate of 346,621 shares from the open market, for a total cost of $6.0 million , at an average price of $17.34 per share. Since the inception of the prior repurchase program in 2010, the Company repurchased an aggregate of 6,069,714 shares from the open market including shares purchased in a dutch tender offer for a total cost of $56.8 million , at an average price of $9.35 per share, excluding fees and related expenses.  No repurchased shares have been retired. Of the 6,069,714 repurchased shares, 122,154 shares with a weighted average repurchase price of $10.70 per share, were reissued at an average price of $6.06 per share pursuant to option exercises and vested restricted share units. As of December 31, 2017 , approximately $24.0 million remained available under the Repurchase Program.

Stock Options

The Company did not grant any stock options during the six months ended December 31, 2017 . The number of options expected to vest is the result of applying the pre-vesting forfeiture rate assumption to total outstanding options.

Restricted Stock Units ("RSU")

The following table summarizes the Company's RSU activities for the six months ended December 31, 2017 :

The fair value of RSU is based on the market price of the Company's share on the date of grant.

In March 2017, the Company granted 170,000 performance-based RSUs ("PRSUs") to its key personnel. The number shares to be issued under the PRSU will be determined based on the level of attainment of predetermined financial goals. The PRSU will vest in four equal annual installments from March 15, 2018 if certain predetermined financial goals were met. The Company recorded approximately $0.5 million and $0.7 million of expenses for these PRSUs during the three and six months ended December 31, 2017.

The Board previously approved the incentive cash bonus plan (the "Plan") for the calendar year commencing January 1, 2017 pursuant to which each executive officer of the Company who continues in service through the end of the calendar year will be eligible to receive an incentive award, payable solely in cash, based on the level of attainment of certain specified Company performance goals. On November 15, 2017, the Board approved an amendment to the Plan that permits the Company to pay up to 50% of such incentive awards in common shares of the Company. The Company recorded $1.5 million of such RSUs expenses in the three months ended December 31, 2017. The expenses are reported in the accrued liabilities line in the condensed consolidated balance sheet as the total amount of bonus is to be settled in variable number of shares. Such non-cash compensation expenses are recorded as part of stock-based compensation expense in the condensed consolidated statements of operations.

Employee Share Purchase Plan ("ESPP")

Share-based Compensation Expense

T he total share-based compensation expense related to stock options, RSUs and ESPP described above, recognized in the condensed consolidated statements of operations for the periods presented was as follows:

As of December 31, 2017 , total unrecognized compensation cost under the Company's equity plans was $9.7 million , which is expected to be recognized over a weighted-average period of 1.2 years.

8. Income Taxes

For the three months ended December 31, 2017 , the Company recognized income tax benefit of approximately $2.1 million , which included a discrete tax benefit of $2.7 million related to re-measuring the Company's U.S. deferred tax assets and liabilities following enactment of the 2017 U.S. Tax Cut and Jobs Act in December 2017. For the three months ended December 31, 2016, the Company recognized income tax expense of approximately $1.1 million . Excluding the discrete income tax items, the estimated effective tax rate for the three months ended December 31, 2017 was 31.4% compared to 39.1% for the three months ended December 31, 2016. The changes in the effective tax rate and tax expense between the periods resulted primarily from the reduction in the U.S. corporate tax rate following the enactment of the 2017 U.S. Tax Cut and Jobs Act along with changes in the mix of earnings in various geographic jurisdictions between the current year and the same period of last year.

For the six months ended December 31, 2017, the Company recognized an income tax benefit of approximately $ 0.8 million , which included a discrete tax benefit of $2.7 million related to remeasuring the Company's U.S. deferred tax assets and liabilities following enactment of the 2017 U.S. Tax Cut and Jobs Act in December 2017. For the six months ended December 31, 2016, the Company recognized income tax expense of approximately $2.3 million . Excluding the discrete income tax items, the estimated effective tax rate for the six months ended December 31, 2017 was 24.0% compared to 35.6% for the six months ended December 31, 2016. The changes in the effective tax rate and tax expense between the periods resulted primarily from the reduction in the U.S. corporate tax rate following the enactment of the 2017 U.S. Tax Cut and Jobs Act along with changes in the mix of earnings in various geographic jurisdictions between the current year and the same period of last year.

During the quarter ended September 30, 2016, the Company contributed certain packaging equipment as required by the JV Agreement by transferring the legal titles of such equipment to the JV Company. As a result of the transfer, the Company reduced its deferred tax assets by $6.6 million and recorded a $6.6 million in prepaid tax asset, which was amortized to tax expense over the useful life of the assets. As of June 30, 2017, the prepaid tax asset was amortized down to $5.5 million , of which $1.1 million and $4.4 million were included in prepaid and other current assets and other long-term assets on the Company's balance sheet, respectively. On July 1, 2017, the Company adopted ASU 2016-16, Intra-Entity Transfers of Assets other than Inventory, which resulted in a de-recognition of a prepaid tax asset of $5.5 million related to the prior period intra-

entity asset transfer with the JV Company, with an offsetting reduction to retained earnings.  Because the JV Company has a full valuation allowance, there was no change to the Company's net deferred tax assets.

The Company files its income tax returns in the United States and in various foreign jurisdictions. The tax years 2002 to 2017 remain open to examination by U.S. federal and state tax authorities. The tax years 2010 to 2017 remain open to examination by foreign tax authorities.

The Company's income tax returns are subject to examinations by the Internal Revenue Service and other tax authorities in various jurisdictions. In accordance with the guidance on the accounting for uncertainty in income taxes, the Company regularly assesses the likelihood of adverse outcomes resulting from these examinations to determine the adequacy of its provision for income taxes. These assessments can require considerable estimates and judgments. As of December 31, 2017 , the gross amount of unrecognized tax benefits was approximately $6.8 million , of which $4.1 million , if recognized, would reduce the effective income tax rate in future periods. If the Company's estimate of income tax liabilities proves to be less than the ultimate assessment, then a further charge to expense would be required. If events occur and the payment of these amounts ultimately proves to be unnecessary, the reversal of the liabilities would result in tax benefits being recognized in the period when the Company determines the liabilities are no longer necessary. The Company does not anticipate any material changes to its uncertain tax positions during the next twelve months .

On July 27, 2015, in Altera Corp. v. Commissioner , the U.S. Tax Court issued an opinion related to the treatment of share-based compensation expense in an intercompany cost-sharing arrangement. A final decision has yet to be issued by the Tax Court due to other outstanding issues related to the case. At this time, the U.S. Department of the Treasury has not withdrawn the requirement to include share-based compensation from its regulations. Due to the uncertainty surrounding the status of the current regulations, questions related to the scope of potential benefits, and the risk of the Tax Court's decision being overturned upon appeal, the Company has not recorded any benefit as of December 31, 2017 . The Company will continue to monitor ongoing developments and potential impacts to its financial statements.

9. Segment and Geographic Information

The Company is organized as, and operates in, one operating segment: the design, development and supply of power semiconductor products for computing, consumer electronics, communication and industrial applications. The chief operating decision-maker is the Chief Executive Officer. The financial information presented to the Company's Chief Executive Officer is on a consolidated basis, accompanied by information about revenue by customer and geographic region, for purposes of evaluating financial performance and allocating resources. The Company has one business segment, and there are no segment managers who are held accountable for operations, operating results and plans for products or components below the consolidated unit level. Accordingly, the Company reports as a single operating segment.

The Company sells its products primarily to distributors in the Asia Pacific region, who in turn sell these products to end customers. Because the Company's distributors sell their products to end customers which may have a global presence, revenue by geographical location is not necessarily representative of the geographical distribution of sales to end user markets.

The revenue by geographical location in the following tables is based on the country or region to which the products were shipped to:

The following is a summary of revenue by product type:

10. Commitments and Contingencies

Purchase Commitments

As of December 31, 2017 and June 30, 2017 , the Company had approximately $34.7 million and $25.7 million , respectively, of outstanding purchase commitments primarily for purchases of semiconductor raw materials, wafers, spare parts and packaging and testing services, and approximately $128.7 million and $69.2 million , respectively, of capital commitments for the purchase of property and equipment and EPC construction.

Other Commitments

See Note 4, Note 5 and Note 6 of the Notes to the Condensed Consolidated Financial Statements contained in this Quarterly Report on Form 10-Q for descriptions of commitments including STMicro license, debt and Joint Venture .

Contingencies and Indemnities

The Company is currently not a party to any pending material legal proceedings. The Company has in the past, and may from time to time in the future, become involved in legal proceedings arising from the normal course of business activities.  The semiconductor industry is characterized by frequent claims and litigation, including claims regarding patent and other intellectual property rights as well as improper hiring practices. Irrespective of the validity of such claims, the Company could incur significant costs in the defense of such claims and suffer adverse effects on its operations.

The Company is a party to a variety of agreements that it has contracted with various third parties. Pursuant to these agreements, the Company may be obligated to indemnify another party to such an agreement with respect to certain matters. Typically, these obligations arise in the context of contracts entered into by the Company, under which the Company customarily agrees to hold the other party harmless against losses arising from a breach of representations and covenants related to such matters as title to assets sold, certain intellectual property rights, specified environmental matters and certain income taxes. In these circumstances, payment by the Company is customarily conditioned on the other party making a claim pursuant to the procedures specified in the particular contract, which procedures typically allow the Company to challenge the other party's claim. Further, the Company's obligations under these agreements may be limited in time and/or amount, and in some instances, the Company may have recourse against third parties for certain payments made by it under these agreements. The Company has not historically paid or recorded any material indemnifications and no accrual has been made at December 31, 2017 and June 30, 2017 .

The Company has agreed to indemnify its directors and certain employees as permitted by law and pursuant to its Bye-laws, and has entered into indemnification agreements with its directors and executive officers. The Company has not recorded a liability associated with these indemnification arrangements, as it historically has not incurred any material costs associated with such indemnification obligations. Costs associated with such indemnification obligations may be mitigated by insurance coverage that the Company maintains. However, such insurance may not cover any, or may cover only a portion of, the amounts the Company may be required to pay. In addition, the Company may not be able to maintain such insurance coverage in the future.

ITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Except for the historical information contained herein, the matters addressed in this Item 2 constitute "forward-looking statements" within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Such forward-looking statements are subject to a variety of risks and uncertainties, including those discussed below under the heading "Risk Factors" and elsewhere in this Quarterly Report on Form 10-Q, that could cause actual results to differ materially from those anticipated by the Company's management. The Private Securities Litigation Reform Act of 1995 (the "Act") provides certain "safe harbor" provisions for forward-looking statements. All forward-looking statements made in this Quarterly Report on Form 10-Q are made pursuant to the Act. The Company undertakes no obligation to publicly release the results of any revisions to its forward-looking statements that may be made to reflect events or circumstances after the date hereof or to reflect the occurrence of unexpected events. Unless the context otherwise requires, the words "AOS," the "Company," "we," "us" and "our" refer to Alpha and Omega Semiconductor Limited and its subsidiaries.

This management's discussion should be read in conjunction with the management's discussion included in the Company's Annual Report on Form 10-K for the fiscal year ended June 30, 2017 , filed with the Securities and Exchange Commission on September 5, 2017 .

Overview

We are a designer, developer and global supplier of a broad portfolio of power semiconductors. Our portfolio of power semiconductors includes approximately 1,700 products, and has grown with the introduction of 80 new products during the fiscal year ended June 30, 2017, and over 90 new products during each of the fiscal years ended June 30, 2016 and 2015. During the six months ended December 31, 2017 , we introduced an additional 93 new products. Our teams of scientists and engineers have developed extensive intellectual properties and technical knowledge that encompass major aspects of power semiconductors, which we believe enables us to introduce and develop innovative products to address the increasingly complex power requirements of advanced electronics. We have an extensive patent portfolio that consists of 703 patents and 116 patent applications in the United States as of December 31, 2017 . We also had a total of 635 foreign patents, which substantially were based on our research and development efforts as of December 31, 2017. We differentiate ourselves by integrating our expertise in technology, design and advanced packaging to optimize product performance and cost. Our portfolio of products targets high-volume applications, including personal computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment.

Our business model leverages global resources, including research and development and manufacturing in the United States and Asia. Our sales and technical support teams are localized in several growing markets. We operate a 200mm wafer fabrication facility in Hillsboro, Oregon, or the Oregon fab, which is critical for us to accelerate proprietary technology development and new product introduction as well as to improve our financial performance in the long run. To meet the market demand for more mature high volume products, we also utilize the wafer manufacturing capacity of selected third party foundries. For assembly and test, we primarily rely upon our in-house facilities in China. In addition, we utilize subcontracting partners for industry standard packages. We believe our in-house packaging and testing capability provides us with a competitive advantage in proprietary packaging technology, product quality, cost and sales cycle time.

On March 29, 2016, we entered into a joint venture contract (the "JV Agreement") with two investment funds owned by the Municipality of Chongqing (the "Chongqing Funds"), pursuant to which we and the Chongqing Funds formed a joint venture, (the "JV Company"), for the purpose of constructing a power semiconductor packaging, testing and wafer fabrication facility in the Liangjiang New Area of Chongqing, China (the "JV Transaction"). The total initial capitalization of the JV Company is $330.0 million (the "Initial Capitalization"), which will be completed in stages. As of December 31, 2017 , the Chongqing Funds contributed a total of $120.0 million of initial capital in cash and we contributed $10.0 million in cash and certain intangible assets, as well as certain packaging equipment as required by the JV Agreement by transferring the legal titles of such equipment to the JV Company. We own 51%, and the Chongqing Funds own 49%, of the equity interest in the JV Company. If both parties agree that the termination of the JV Company is the best interest of each party or the JV Company is bankrupt or insolvent where either party may terminate early, after paying the debts of the JV Company, the remaining assets of the JV Company shall be paid to the Chongqing Funds to cover the principal of its total paid-in contributions plus interest at 10% simple annual rate prior to distributing the balance of the JV Company's assets to us. We expect the JV Company to commence initial production in mid-calendar year 2018. During the three and six months ended December 31, 2017, we recorded $1.7 million and $3.1 million in net loss attributable to noncontrolling interest, representing 49% of the net loss incurred in the JV Company, which was attributable to operating expenses and depreciation expenses offset by equipment lease income and interest income. In the long-term, the JV

Company plans to construct and operate a 12-inch wafer fabrication facility for the production of power semiconductors. We expect the joint venture to deliver significant cost savings, and enhance our market positions in China, and drive meaningful improvements in working capital and capital expenditures.

As part of the JV Transaction, the JV Company entered into an Engineering, Procurement and Construction Contract (the "EPC Contract") with The IT Electronics Eleventh Design & Research Institute Scientific and Technological Engineering Corporation Limited (the "Contractor"), effective as of January 10, 2017 (the "Effective Date"), pursuant which the Contractor was engaged to construct the manufacturing facility contemplated under the JV Agreement. Under the EPC Contract, the Contractor's obligations include, but are not limited to: (i) the development of conceptual design, initial design, construction drawing design and optimization, and submission of such designs to the JV Company for examination and confirmation; and (ii) the construction of the assembly and wafer fabrication facilities and related procurement services, including the selection and engagement of subcontractors, in accordance with a construction schedule agreed upon by the parties. The total price payable under the EPC Contract is Chinese Renminbi (RMB) 540.0 million, or approximately $78.0 million, based on the currency exchange rate between RMB and U.S. Dollars on the Effective Date, which consists of $2.8 million (RMB 19.5 million) of design fees ("Design Fees") and $75.2 million (RMB 520.5 million) of construction and procurement fees (including compliance with safety and aesthetic requirements) ("Construction Fees"). The payment is subject to volatility as a result of exposure to fluctuations in RMB foreign exchange rates. The Design Fees and Construction Fees are paid by the JV Company pursuant to a payment schedule based on the progress of the construction and the achievements of specified milestones. As of December 31, 2017, the JV Company paid approximately $37.0 million (RMB 243.8 million ), and expects to pay the remaining of $44.9 million (RMB 296.2 million ) in calendar year 2018. The payment is subject to volatility as a result of exposure to fluctuations in RMB foreign exchange rates.

On September 5, 2017, we entered into a license agreement with STMicroelectronics International N.V. ("STMicro"), pursuant to which STMicro granted us a world-wide, royalty-free and fully-paid license to use its technologies to develop, market and distribute certain digital multi-phase controller products, which have been previously offered by STMicro.  Under the license agreement, we agreed to pay a total price in cash of $17.0 million based on the payment schedule as set forth in the agreement of approximately $10.1 million, $6.7 million and $0.2 million in calendar year 2017, 2018 and 2019, respectively. As of December 31, 2017 , we recorded $13.8 million of such intangible assets, of which $9.8 million in cash was paid to STMicro.

During the second quarter of fiscal year of 2018, we introduced AONR21357, which uses the improved P-Channel MOSFET process to achieve low power loss and reliable startup. This new P-Channel MOSFET is ideal for load switch applications in Notebook Adapter-In/ Battery In sockets. We also released AONS66916 production utilizing the latest Alpha Shield Gate Technology Generation 2 (AlphaSGT2), which attributes enable higher efficiency and robustness to critical high density telecom and server applications. During the first quarter of fiscal year of 2018, we released OTF190A60L, the first product in the new αMOS5TMHV MOSFET platform.  This device provides high-efficiency performance in an easy-to-use solution optimized for server power supplies, high-end computers, charging stations and other high-performance applications.  We also introduced AOZ5131QI, the latest generation of power modules. The new device enables high power-density voltage regulator solutions ideal for CPU and GPU power regulation in notebook PCs, servers, and graphic cards. In addition, we expanded our recently launched fast turn-off switched 650V H-series IGBT family with a 1200V rating. The new AOK40B120H1has been developed to address needs of industrial welding and high-frequency converters with 3-phase ac or high voltage dc input. The device offers excellent performance in high switching frequency applications, which can be a perfect fit for high voltage industrial welding machine. 

Factors affecting our performance

Our performance is affected by several key factors, including the following:

Costs of JV Company and digital power business: We expect our operating expenses to increase in the short term due to the additional costs associated with ramping up pre-production activities of the JV Company, as well as the initial startup work to develop and establish our new digital power business. As the JV Company is expected to complete on schedule the construction of its assembly and testing facilities during the quarter ending March 31, 2018, the pre-production costs will increase significantly, including costs relating to the installation of equipment; performance of qualification process; increased demand for electrical power and utility; increased headcounts as a result of hiring of additional personnel, staff and operators; and establishment of administrative and management functions and systems. In addition, a portion of these pre-production costs cannot be capitalized under GAAP accounting. Furthermore, following the execution of the STMicro license agreement in September 2017, we are accelerating the development of our digital power business to design and distribute a full suite of advanced low-voltage power IC products. We expect to incur additional costs, including costs relating to recruiting and hiring of qualified engineers and technical staff and other research and development and management activities as we start to build this n

ew business. In the short term, we will not be able to generate sufficient amount of revenue from either of these two business initiatives to offset the increase costs, which will likely negatively impact our results of operations.

Manufacturing costs :  Our gross margin may be affected by our manufacturing costs, including utilization of our manufacturing facilities, pricing of wafers from third party foundries and semiconductor raw materials, which may fluctuate from time to time largely due to the market demand and supply.  Capacity utilization affects our gross margin because we have certain fixed costs associated with our packaging and testing facilities and our Oregon fab.  If we are unable to utilize our manufacturing facilities at a desired level, our gross margin may be adversely affected.  In addition, we expect that in the long term our joint venture agreement with the Chongqing Funds will reduce our costs of manufacturing. However, our manufacturing costs may increase in the short term prior to the commencement of operation of the JV Company, because we may be required to incur additional costs to acquire packaging and testing capacity in order make up for the reduced capacity during the period in which we transfer our equipment from Shanghai to Chongqing. Furthermore, from time to time, we may experience wafer capacity constraints, particularly at third party foundries, that may prevent us from fully meeting the demand of our customers. While we can mitigate such constraints by increasing capacity at our own fab, we may not be able to do so quickly or at sufficient level, which could adversely affect our financial conditions and results of operations.

Erosion of average selling price: Erosion of average selling prices of established products is typical in our industry. Consistent with this historical trend, we expect our average selling prices of existing products to decline in the future. However, in the normal course of business, we seek to offset the effect of declining average selling price by introducing new and higher value products, expanding existing products for new applications and new customers and reducing the manufacturing cost of existing products.

The global, regional economic and PC market conditions : Because our products primarily serve consumer electronic applications, a deterioration of the global and regional economic conditions could materially affect our revenue and results of operations. In particular, because a significant amount of our revenue is derived from sales of products in the personal computing ("PC") markets, such as notebooks, motherboards and notebook battery packs, a significant decline or downturn in the PC market can have a material adverse effect on our revenue and results of operations.  Our revenue from the PC market accounted for approximately 42.6% and 38.4% of our total revenue for the three months ended December 31, 2017 and 2016 , respectively, and 40.7% and 37.2% of our total revenue for the six months ended December 31, 2017 and 2016 , respectively. In the past, we have experienced a significant global decline in the PC markets due to continued growth of demand in tablets and smart phones, worldwide economic conditions and the industry inventory correction which had and may continue to have a material negative impact on the demand for our products, revenue, factory utilization, gross margin, our ability to resell excess inventory, and other performance measures.

We have executed and continue to execute strategies to diversify our product portfolio, penetrate into other market segments, including the consumer, communications and industrial markets, and improve gross margins and profit by implementing cost control measures. While making progress in reducing our reliance on the computing market, we continue to support our computing business and capitalize on the opportunities in this market with a more focused and competitive PC product strategy. However, if the rate of decline in the PC markets is faster than we expect, or if we cannot successfully diversify or introduce new products to keep pace with the declining PC markets, we may not be able to alleviate its negative impact on our results of operations.

Product introductions and customers' product requirements : Our success depends on our ability to introduce products on a timely basis that meet or are compatible with our customers' specifications and performance requirements. Both factors, timeliness of product introductions and conformance to customers' requirements, are equally important in securing design wins with our customers. As we accelerate the development of new technology platforms, we expect to increase the pace at which we introduce new products and obtain design wins. Our failure to introduce new products on a timely basis that meet customers' specifications and performance requirements, particularly those products with major OEM customers, and our inability to continue to expand our serviceable markets, could adversely affect our financial performance, including loss of market share. We believe that the JV Transaction will increase and diversify our customer base, particularly in China, in the long term. We expect the JV Company to commence initial production in mid-calendar year 2018. However, there is no guarantee that the JV Company will commence timely or at all, and we may experience delays in the construction of the facility. Even if we are able to commence JV operation, we may not be successful in acquiring a sufficient number of new customers to offset the additional costs due to various factors, including but are not limited to, competition from other semiconductor companies in the region, our lack of history and prior relationships with customers as a new entrant, difficulties in executing our joint venture strategies, lack of control over our operations and the general economic conditions in Chongqing and China.

Distributor ordering patterns, customer demand and seasonality : Our distributors place purchase orders with us based on their forecasts of end customer demand, and this demand may vary significantly depending on the sales outlook and market and

economic conditions of end customers. Because these forecasts may not be accurate, channel inventory held at our distributors may fluctuate significantly, which in turn may prompt distributors to make significant adjustments to their purchase orders placed with us. As a result, our revenue and operating results may fluctuate significantly from quarter to quarter. In addition, because our products are used in consumer electronics products, our revenue is subject to seasonality. Our sales seasonality is affected by numerous factors, including global and regional economic conditions as well as the PC market conditions, revenue generated from new products, changes in distributor ordering patterns in response to channel inventory adjustments and end customer demand for our products and fluctuations in consumer purchase patterns prior to major holiday seasons. In recent periods, broad fluctuations in the semiconductor markets and the global and regional economic conditions, in particular the decline of the PC market conditions, have had a more significant impact on our results of operations than seasonality. Furthermore, our revenue may be impacted by the level of demand from our major customers due to factors outside of our control. If these major customers experience significant decline in the demand of their products, encounter difficulties or defects in their products, or otherwise fail to execute their sales and marketing strategies successfully, it may adversely affect our revenue and results of operations.

Principal line items of statements of operations

The following describes the principal line items set forth in our condensed consolidated statements of operations:

Revenue

We generate revenue primarily from the sale of power semiconductors, consisting of power discretes and power ICs. Because our products typically have three to five year life cycles, the rate of new product introduction is an important driver of revenue growth over time. We believe that expanding the breadth of our product portfolio is important to our business prospects, because it provides us with an opportunity to increase our total bill-of-materials within an electronic system and to address the power requirements of additional electronic systems. In addition, a small percentage of our total revenue is generated by providing packaging and testing services to third-parties through one of our subsidiaries.

Our product revenue includes the effect of the estimated stock rotation returns and price adjustments that we expect to provide to our distributors. Stock rotation returns are governed by contract and are limited to a specified percentage of the monetary value of products purchased by the distributor during a specified period. At our discretion or upon our direct negotiations with the original design manufacturers ("ODMs") or original equipment manufacturers ("OEMs"), we may elect to grant special pricing that is below the prices at which we sold our products to the distributors. In these situations, we will grant price adjustments to the distributors reflecting such special pricing. We estimate the price adjustments for inventory at the distributors based on factors such as distributor inventory levels, pre-approved future distributor selling prices, distributor margins and demand for our products.

Cost of goods sold

Our cost of goods sold primarily consists of costs associated with semiconductor wafers, packaging and testing, personnel, including share-based compensation expense, overhead attributable to manufacturing, operations and procurement, and cost associated with yield improvements, capacity utilization, warranty and inventory reserves. As the volume of sales increases, we expect cost of goods sold to increase. We implemented a process to improve our factory capacity utilization rates by transferring more wafer production to our Oregon fab and reducing our reliance on outside foundries. While our utilization rates cannot be immune to market conditions, our goal is to make such rates less vulnerable to market fluctuations. We believe our market diversification strategy and product growth will drive higher volumes of manufacturing which will improve our factory utilization rates and gross margin in the long run.

Operating expenses

Our operating expenses consist of research and development, selling, general and administrative expenses. We expect our operating expenses as a percentage of revenue to fluctuate from period to period as we continue to exercise cost control measures in response to the declining PC market as well as align our operating expenses to the revenue level.

Research and development expenses.  Our research and development expenses consist primarily of salaries, bonuses, benefits, share-based compensation expense, expenses associated with new product prototypes, travel expenses, fees for engineering services provided by outside contractors and consultants, amortization of software and design tools, depreciation of equipment and overhead costs. We continue to invest in developing new technologies and products utilizing our own fabrication and packaging facilities as it is critical to our long-term success. We also evaluate appropriate investment levels and stay focused on new product introductions to improve our competitiveness. We expect that our research and development expenses will fluctuate from time to time.

Selling, general and administrative expenses.  Our selling, general and administrative expenses consist primarily of salaries, bonuses, benefits, share-based compensation expense, product promotion costs, occupancy costs, travel expenses, expenses related to sales and marketing activities, amortization of software, depreciation of equipment, maintenance costs and other expenses for general and administrative functions as well as costs for outside professional services, including legal, audit and accounting services. We expect our selling, general and administrative expenses to fluctuate in the near future as we continue to exercise cost control measures in response to the declining PC market.

Income tax expense

We are subject to income taxes in various jurisdictions. Significant judgment and estimates are required in determining our worldwide income tax expense. The calculation of tax liabilities involves dealing with uncertainties in the application of complex tax regulations of different jurisdictions globally. We establish accruals for potential liabilities and contingencies based on a more likely than not threshold to the recognition and de-recognition of uncertain tax positions. If the recognition threshold is met, the applicable accounting guidance permits us to recognize a tax benefit measured at the largest amount of tax benefit that is more likely than not to be realized upon settlement with a taxing authority. If the actual tax outcome of such exposures is different from the amounts that were initially recorded, the differences will impact the income tax and deferred tax provisions in the period in which such determination is made. Changes in the location of taxable income (loss) could result in significant changes in our income tax expense.

We record a valuation allowance against deferred tax assets if it is more likely than not that a portion of the deferred tax assets will not be realized, based on historical profitability and our estimate of future taxable income in a particular jurisdiction. Our judgments regarding future taxable income may change due to changes in market conditions, changes in tax laws, tax planning strategies or other factors. If our assumptions and consequently our estimates change in the future, the deferred tax assets may increase or decrease, resulting in corresponding changes in income tax expense. Our effective tax rate is highly dependent upon the geographic distribution of our worldwide profits or losses, the tax laws and regulations in each geographical region where we have operations, the availability of tax credits and carry-forwards and the effectiveness of our tax planning strategies.

During the quarter ended September 30, 2016, we contributed certain packaging equipment as required by the JV Agreement by transferring the legal title of such equipment to the JV Company. As a result of the transfer, we reduced our deferred tax assets by $6.6 million and recorded a $6.6 million in prepaid tax asset, which was amortized to tax expense over the useful life of the assets. As of June 30, 2017, the prepaid tax asset was amortized down to $5.5 million, of which $1.1 million and $4.4 million were included in prepaid and other current assets and other long-term assets on our balance sheet, respectively. On July 1, 2017, we adopted ASU 2016-16, Intra-Entity Transfers of Assets other than Inventory, which resulted in a de-recognition of a prepaid tax asset of $5.5 million related to the prior period intra-entity asset transfer with the JV Company, with an offsetting reduction to retained earnings.  Because the JV Company has a full valuation allowance, there was no change to our net deferred tax assets.

U.S. Tax Cuts and Jobs Act, Enacted December 22, 2017

On December 22, 2017, the United States enacted tax reform legislation through the Tax Cuts and Jobs Act ("the Tax Act"), which significantly changes the existing U.S. tax laws, including, but not limited to, (1) a reduction in the corporate tax rate from 35% to 21%, (2) a move from a worldwide tax system to a territorial system, (3) eliminating the corporate alternative minimum tax (AMT) and changing how existing AMT credits can be realized, (4) bonus depreciation that will allow for full expensing of qualified property, (5) creating a new limitation on deductible interest expense and (6) changing rules related to uses and limitations of net operating loss carryforwards created in tax years beginning after December 31, 2017.

The SEC staff issued Staff Accounting Bulletin No. 118 ("SAB 118"), which provides guidance on accounting for the tax effects of the Tax Act. SAB 118 provides a measurement period that should not extend beyond one year from the Tax Act enactment date for companies to complete the accounting under Accounting Standards Codification Topic 740 ("ASC 740"). In accordance with SAB 118, a company must reflect the income tax effects of those aspects of the Tax Act for which the accounting under ASC 740 is complete. To the extent that a company's accounting for certain income tax effects of the Tax Act is incomplete but it is able to determine a reasonable estimate, it must record a provisional estimate in the financial statements. If a company cannot determine a provisional estimate to be included in the financial statements, it should continue to apply ASC 740 on the basis of the provisions of the tax law that were in effect immediately before the enactment of the Tax Act.

In connection with our initial analysis of the impact of the Tax Act, we reported a second quarter of fiscal year 2018 discrete tax benefit of $2.7 million related to the re-measurement of certain deferred tax assets and liabilities. In addition, we are using a

28% U.S. federal tax rate to measure our U.S. federal income tax expense for fiscal year 2018, down from the 34% U.S. federal income tax rate used in first quarter of fiscal year 2018.

Our accounting for the impact of the Tax Act is complete for provisions of the Act that could impact our fiscal year 2018 financial statements.  We are still analyzing the provisions of the Act that may impact future periods.  Our management expects the Act to favorably impact our net income, diluted earnings per share, and cash flows in future periods, due primarily to the reduction in the federal corporate tax rate from 35% to 21% effective for periods beginning January 1, 2018. Our management currently estimates that our blended consolidated effective income tax rate ("tax rate") for full-year fiscal 2018 will approximate 27% before discrete items, compared with nearly 33% for the prior year.

Results of Operations

The following tables set forth statements of operations, also expressed as a percentage of revenue, for the three and six months ended December 31, 2017 and 2016 . Our historical results of operations are not necessarily indicative of the results for any future period.

The Board previously approved the incentive cash bonus plan (the "Plan") for the calendar year commencing January 1, 2017 pursuant to which each our executive officer who continues in service through the end of the calendar year will be eligible

to receive an incentive award, payable solely in cash, based on the level of attainment of certain specified our performance goals. On November 15, 2017, the Board approved an amendment to the Plan that permits the Company to pay up to 50% of such incentive awards in the common shares of the Company. We recorded $1.5 million of such stock-based expenses in the three month ended December 31, 2017. The expenses are reported in the accrued liabilities line in the condensed consolidated balance sheet as the total amount of bonus is to be settled in variable number of common shares. Such non-cash compensation expenses are recorded as part of stock-based compensation expense in the condensed consolidated statements of operations.

Three And Six Months Ended December 31, 2017 and 2016

Revenue

The following is a summary of revenue by product type: