_________________________________

_________________________________

For the quarterly period ended September 30, 2016

or

For the transition period from __________ to __________

Commission File No. 1-13696

(Exact name of registrant as specified in its charter)

(513) 425-5000

(Registrant's telephone number, including area code)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, and (2) has been subject to filing requirements for the past 90 days. Yes T No £

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months. Yes T No £

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.

Indicate by check mark whether the registrant is a shell company. Yes £ No T

There were 238,269,620 shares of common stock outstanding as of October 24, 2016 .

AK STEEL HOLDING CORPORATION

TABLE OF CONTENTS

PART I. FINANCIAL INFORMATION

Item 1. Financial Statements.

See notes to condensed consolidated financial statements.

See notes to condensed consolidated financial statements.

The condensed consolidated balance sheets as of September 30, 2016 and December 31, 2015 , include the following amounts related to consolidated variable interest entities, prior to intercompany eliminations. See Note 12 for more information concerning variable interest entities.

See notes to condensed consolidated financial statements.

See notes to condensed consolidated financial statements.

See notes to condensed consolidated financial statements.

NOTE 1 - Basis of Presentation

These financial statements consolidate the operations and accounts of AK Steel Holding Corporation ("AK Holding"), its wholly-owned subsidiary AK Steel Corporation ("AK Steel"), all subsidiaries in which AK Holding has a controlling interest, and two variable interest entities for which AK Steel is the primary beneficiary. Unless the context provides otherwise, references to "we," "us" and "our" refer to AK Holding and its subsidiaries. In our opinion, the accompanying condensed consolidated financial statements contain all adjustments, consisting of normal recurring adjustments, necessary to present fairly our financial position as of September 30, 2016 and December 31, 2015 , our results of operations for the three and nine months ended September 30, 2016 and 2015 , and our cash flows for the nine months ended September 30, 2016 and 2015 . Our results of operations for the three and nine months ended September 30, 2016 are not necessarily indicative of the results we expect for the full year ending December 31, 2016 . These condensed consolidated financial statements should be read along with our audited consolidated financial statements for the year ended December 31, 2015 , included in our Annual Report on Form 10-K for the year ended December 31, 2015 .

NOTE 2 - Supplementary Financial Statement Information

Inventory, net

Inventories as of September 30, 2016 and December 31, 2015 , are presented below:

Facility Idling

In the fourth quarter of 2015, we temporarily idled the Ashland Works blast furnace and steelmaking operations ("Ashland Works Hot End"). We incurred charges during the fourth quarter of 2015 for supplemental unemployment and other employee benefit costs and for equipment idling, asset preservation and other costs. The supplemental unemployment and other employee benefit costs were recorded as accrued liabilities in the consolidated balance sheet, and the activity for the nine months ended September 30, 2016 was as follows:

We estimate we will incur on-going costs of less than $2.0 per month for maintenance of the equipment, utilities and supplier obligations related to the temporarily idled Ashland Works Hot End. These costs were $4.7 and $17.4 for the three and nine months ended September 30, 2016 . The carrying value of the long-lived assets associated with the temporarily idled operations totaled approximately $70.0 as of September 30, 2016 .

NOTE 3 - Investments in Affiliates

We have investments in several businesses accounted for using the equity method of accounting. Cost of products sold includes $3.2 and $1.8 for the three months ended September 30, 2016 and 2015 , and $9.5 and $5.4 for the nine months ended

September 30, 2016 and 2015 for our share of income of equity investees other than Magnetation LLC ("Magnetation"). Our share of loss from Magnetation is included in other income (expense) and was $16.3 for the nine months ended September 30, 2015 . Our results of operations for the three months ended September 30, 2015 , and the three and nine months ended September 30, 2016 , do not include any losses of Magnetation, as we wrote off the basis in our investment as of March 31, 2015.

Summarized financial statement data for all investees is presented below. The financial results for Magnetation are only included through March 31, 2015, because it was unlikely that we would retain our equity interest as a result of Magnetation's bankruptcy.

Magnetation

As of March 31, 2015, we concluded that our 49.9% equity interest in Magnetation was fully impaired and recorded a non-cash impairment charge of $256.3 for the quarter ended March 31, 2015. On May 5, 2015 , Magnetation and its subsidiaries filed voluntary petitions for relief under Chapter 11 of the Bankruptcy Code with the United States Bankruptcy Court for the District of Minnesota. On October 6, 2016, the Bankruptcy Court approved a Global Settlement Agreement ("Settlement Agreement") with Magnetation, Magnetation Inc., and Magnetation's revolving credit facility lenders, senior secured noteholders and debtor-in-possession facility lenders to terminate the iron ore pellet offtake agreement with Magnetation and to wind down Magnetation's business. Among other terms of the Settlement Agreement, we agreed to make a cash payment ("Termination Payment") to Magnetation's Chapter 11 estate in order to terminate our offtake agreement with Magnetation and cease purchasing iron ore pellets from Magnetation. The next day, the transactions contemplated by the Settlement Agreement were completed and we made a Termination Payment of $36.6 , thereby terminating the pellet offtake agreement. In connection with the approval of the Settlement Agreement and the payment of the Termination Payment to the bankruptcy estate, we expect to recognize a charge in the fourth quarter of 2016 for the Termination Payment and a charge in the range of $15.0 to $35.0 for the present value of remaining obligations under contracts with other third parties to transport pellets to our facilities. The actual payments for these contracts will be made over the next 12.5 years . We are working on actions to mitigate our expense for these contracts, but can give no assurance that we will be successful. We expect to purchase replacement iron ore pellets from third-party producers who can meet our future needs by offering superior reliability, consistent quality and more competitive pricing. In addition, we expect to benefit from enhanced flexibility with iron ore pellets as a result of terminating our offtake agreement with Magnetation.

NOTE 4 - Income Taxes

Income taxes recorded through September 30, 2016 and 2015 , were estimated using the discrete method. Current year income taxes are based on our financial results through September 30, 2016 , as well as the related change in the valuation allowance on deferred tax assets. We are unable to estimate the annual effective tax rate for 2016 with sufficient precision for purposes of the effective tax rate method, which requires us to consider a projection of full-year income and the expected change in the valuation allowance. The estimated annual effective tax rate method was not reliable due to its sensitivity to small changes to forecasted annual pre-tax earnings and the effect of our valuation allowance, which create results with significant variations in the customary relationship between income tax expense and pre-tax income for the interim periods. As a result, we determined that using the discrete method is more appropriate than using the annual effective tax rate method. We have estimated the change in valuation allowances required based on our year-to-date financial results and the change in value of the identified tax-planning strategy, which is determined based on year-to-date LIFO income. In addition, the change in valuation allowance for the nine months ended September 30, 2016 includes a $5.1 benefit related to the effect of the Protecting American Taxpayers and Homeowners (PATH) Act, which allows for the realizability of certain alternative minimum tax credits. Income tax expense for the three months ended September 30, 2016 includes non-cash income tax expense of $3.9 from allocating income tax benefit to other comprehensive income.

NOTE 5 - Long-term Debt and Other Financing

Debt balances at September 30, 2016 , and December 31, 2015 , are presented below:

During the nine months ended September 30, 2016 , we were in compliance with all the terms and conditions of our debt agreements.

Senior Secured Notes

In June 2016 , as part of a transaction to refinance our 8.75% Senior Secured Notes due 2018 (the "Old Notes"), we issued $380.0 aggregate principal amount of 7.50% Senior Secured Notes due July 2023 (the "Refi Notes") and generated net proceeds of $373.4 after underwriting discount. The Refi Notes are fully and unconditionally guaranteed by AK Holding, AK Steel's direct parent, and by AK Tube LLC, AK Steel Properties, Inc. and Mountain State Carbon LLC (together with AK Tube LLC and AK Steel Properties, Inc., the "Subsidiary Guarantors"), three wholly-owned subsidiaries of AK Steel. The Refi Notes will be secured by first priority liens on the plant, property and equipment (other than certain excluded property, and subject to permitted liens) of AK Steel and the Subsidiary Guarantors and any proceeds of the foregoing. We used a portion of the net proceeds to pay the cash tender offer of our Old Notes, as further discussed in the following paragraph. The indenture governing the Refi Notes includes covenants with customary restrictions on (a) the incurrence of additional debt by certain subsidiaries, (b) the incurrence of certain liens, (c) the incurrence of sale/leaseback transactions, (d) the use of proceeds from the sale of collateral, and (e) our ability to merge or consolidate with other entities or to sell, lease or transfer all or substantially all of our assets to another entity. The Refi Notes also contain customary events of default. Before July 15, 2019, we may redeem the Refi Notes at a price equal to par plus a make-whole premium and all accrued and unpaid interest to the date of redemption. After that date, we may redeem them at 103.750% until July 15, 2020, 101.875% thereafter until July 15, 2021 and 100.000% thereafter, together with all accrued and unpaid interest to the date of redemption.

After the issuance of the Refi Notes, we repurchased $251.7 of Old Notes through a cash tender offer (the "Tender Offer") at a tender price equal to 104.750% of principal plus accrued and unpaid interest. The remaining outstanding Old Notes were redeemed in the third quarter of 2016 at a redemption price of 104.375% plus accrued and unpaid interest. In the second quarter of 2016, we recognized other expense of $5.6 for expenses related to the Tender Offer. We recorded additional expense of $6.8 in the third quarter of 2016 related to the call premium paid on the remaining Old Notes that were redeemed and the write-off of unamortized debt discount and issue costs related to the Old Notes. Fees of $14.8 paid to the holders of the Old Notes to tender their notes and expenses paid to third parties related to the issuance of the Refi Notes were recognized as an adjustment to the carrying amount of the Refi Notes and will be recognized over their term as an adjustment to interest expense.

Senior Unsecured Notes

During the nine months ended September 30, 2016 , we repurchased an aggregate principal amount of $10.4 of the 8.375% Senior Notes due 2022 in private, unsolicited, open market transactions. We completed these repurchases at a discount to the senior unsecured notes' par value and recognized a net gain on the repurchases totaling $3.0 for the nine months ended September 30, 2016 , which is included in other income (expense). We did not repurchase any senior unsecured notes in the third quarter of 2016.

Credit Facility

AK Steel has a $1,500.0 asset-backed revolving credit facility (the "Credit Facility"), which expires in March 2019 and is guaranteed by AK Steel's parent company, AK Holding, and by the Subsidiary Guarantors. The Credit Facility contains common restrictions, including limitations on, among other things, distributions and dividends, acquisitions and investments, indebtedness, liens and affiliate transactions. The Credit Facility requires that we maintain a minimum fixed charge coverage ratio of one to one if availability under the Credit Facility is less than $150.0 . The Credit Facility's current availability exceeds $150.0 . Availability is calculated as the lesser of the Credit Facility commitment or our eligible collateral after advance rates, less outstanding borrowings and letters of credit. The Credit Facility obligations are secured by our inventory and accounts receivable, and the Credit Facility's availability fluctuates monthly based on the varying levels of eligible collateral. We do not expect any of these restrictions to affect or limit our ability to conduct business in the ordinary course. The Credit Facility includes a separate "first-in, last-out", or "FILO" tranche, which allows us to use a portion of our eligible collateral at higher advance rates.

At September 30, 2016 , our eligible collateral, after application of applicable advance rates, was $1,294.9 . As of September 30, 2016 , there were outstanding Credit Facility borrowings of $190.0 . Availability as of September 30, 2016 was further reduced by $70.5 of outstanding letters of credit, resulting in remaining availability of $1,034.4 .

Research and Innovation Center Lease

The new research and innovation center we have been building in the Cincinnati/Dayton growth corridor to replace our existing research facility in Middletown, Ohio is nearing completion. We began moving into the new facility in October and expect to be fully transitioned in the fourth quarter of 2016. We financed the majority of the estimated $36.0 project through a long-term capital lease and government incentives. Because of our involvement during the facility's construction, we included $21.6 of costs that the owner-lessor has incurred in property, plant and equipment and as long-term debt in the condensed consolidated balance sheets as of September 30, 2016 .

NOTE 6 - Pension and Other Postretirement Benefits

We provide noncontributory pension and various healthcare and life insurance benefits to most employees and retirees. No contributions to the master pension trust are required for 2016. Based on current actuarial assumptions, we estimate that our required pension contributions will be approximately $50.0 and $75.0 in 2017 and 2018. Factors that affect future funding projections include differences between expected and actual returns on plan assets, actuarial data and assumptions relating to plan participants, the interest rate used to measure the pension obligations and changes to regulatory funding requirements.

Net periodic benefit cost (income) for pension and other postretirement benefits was as follows:

During the third quarter of 2016, we purchased an annuity contract with an insurance company with pension trust assets and transferred to the insurance company our pension obligations of $87.0 for certain retirees or their beneficiaries receiving pension payments. Late in the third quarter of 2016, we entered another agreement with the same insurance company to purchase a second annuity contract to transfer obligations of $123.3 for additional retirees or their beneficiaries. The pension trust transferred assets to purchase the second annuity contract in October 2016. As a result of the second transfer, we expect to record a settlement loss of approximately $25.0 in the fourth quarter of 2016 to recognize a portion of the unrealized actuarial loss associated with the transferred obligations. We also expect to record a pension corridor charge of approximately $106.0 in the fourth quarter of 2016 in connection with the October plan remeasurement. The corridor charge is primarily a result of a decline in discount rates since the beginning of the year, partially offset by better than expected returns on plan assets. It is possible that we may need to record an additional pension corridor charge at the end of the year if key assumptions change between the October plan remeasurement and the year-end plan remeasurement. In total, we transferred the obligations for approximately 10,000 retirees or their beneficiaries to the insurance company for amounts at similar levels to their associated obligations.

During the third quarter of 2016, we performed a remeasurement of an unfunded supplemental retirement plan and recognized a $4.9 settlement loss as a result of lump sum benefit payments made to retired participants.

NOTE 7 - Environmental and Legal Contingencies

Environmental Contingencies

We and our predecessors have been involved in steel manufacturing and related operations since 1900. Although we believe our operating practices have been consistent with prevailing industry standards, hazardous materials may have been released at operating sites or third-party sites in the past, including operating sites that we no longer own. If we reasonably can, we have estimated potential remediation expenditures for those sites where future remediation efforts are probable based on identified conditions, regulatory requirements or contractual obligations arising from the sale of a business or facility. For sites involving government-required investigations, we typically make an estimate of potential remediation expenditures only after the investigation is complete and when we better understand the nature and scope of the remediation. In general, the material factors in these estimates include the costs associated with investigations, delineations, risk assessments, remedial work, governmental response and oversight, site monitoring, and preparation of reports to the appropriate environmental agencies. We have recorded the following liabilities for environmental matters on our condensed consolidated balance sheets:

We cannot predict the ultimate costs for each site with certainty because of the evolving nature of the investigation and remediation process. Rather, to estimate the probable costs, we must make certain assumptions. The most significant of these assumptions is for the nature and scope of the work that will be necessary to investigate and remediate a particular site and the cost of that work. Other significant assumptions include the cleanup technology that will be used, whether and to what extent any other parties will participate in paying the investigation and remediation costs, reimbursement of past response and future oversight costs by governmental agencies, and the reaction of the governing environmental agencies to the proposed work plans. Costs for future investigation and remediation are not discounted to their present value. If we have been able to reasonably estimate future liabilities, we do not believe that there is a reasonable possibility that we will incur a loss or losses that exceed the amounts we accrued for the environmental matters discussed below that would, either individually or in the aggregate, have a material adverse effect on our consolidated financial condition, results of operations or cash flows. However, since we recognize amounts in the consolidated financial statements in accordance with accounting principles generally accepted in the United States that exclude potential losses that are not probable or that may not be currently estimable, the ultimate costs of these environmental proceedings may be higher than the liabilities we currently have recorded in our consolidated financial statements.

Except as we expressly note below, we do not currently anticipate any material effect on our consolidated financial position, results of operations or cash flows as a result of compliance with current environmental regulations. Moreover, because all domestic steel producers operate under the same federal environmental regulations, we do not believe that we are more disadvantaged than our domestic competitors by our need to comply with these regulations. Some foreign competitors may benefit from less stringent environmental requirements in the countries where they produce, resulting in lower compliance costs for them and providing those foreign competitors with a cost advantage on their products.

According to the Resource Conservation and Recovery Act ("RCRA"), which governs the treatment, handling and disposal of hazardous waste, the United States Environmental Protection Agency ("EPA") and authorized state environmental agencies may conduct inspections of RCRA-regulated facilities to identify areas where there have been releases of hazardous waste or hazardous constituents into the environment and may order the facilities to take corrective action to remediate such releases. Environmental regulators may inspect our major steelmaking facilities. While we cannot predict the future actions of these regulators, it is possible that they may identify conditions in future inspections of these facilities which they believe require corrective action.

Under authority from the Comprehensive Environmental Response, Compensation and Liability Act ("CERCLA"), the EPA and state environmental authorities have conducted site investigations at certain of our facilities and other third-party facilities, portions of which previously may have been used for disposal of materials that are currently regulated. The results of these investigations are still pending, and we could be directed to spend funds for remedial activities at the former disposal areas. Because of the uncertain status of these investigations, however, we cannot reliably predict whether or when such spending might be required or their magnitude.

As previously reported, on July 27, 2001, we received a Special Notice Letter from the EPA requesting that we agree to conduct a Remedial Investigation/Feasibility Study ("RI/FS") and enter an administrative order on consent pursuant to Section 122 of CERCLA regarding our former Hamilton Plant located in New Miami, Ohio. The Hamilton Plant ceased operations in 1990, and all of its former structures have been demolished and removed. Although we did not believe that a site-wide RI/FS was necessary or appropriate, in April 2002 we entered a mutually agreed-upon administrative order on consent to perform a RI/FS of the Hamilton Plant site. We submitted the investigation portion of the RI/FS, and we completed a supplemental study in 2014. We currently have accrued $0.7 for the remaining cost of the RI/FS. Until the RI/FS is complete, we cannot reliably estimate the additional costs, if any, we may incur for potentially required remediation of the site or when we may incur them.

As previously reported, on September 30, 1998, our predecessor, Armco Inc., received an order from the EPA under Section 3013 of RCRA requiring it to develop a plan for investigation of eight areas of our Mansfield Works that allegedly could be sources of contamination. A site investigation began in November 2000 and is continuing. We cannot reliably estimate at this time how long it will take to complete this site investigation. We currently have accrued approximately $1.1 for the projected

cost of the study. Until the site investigation is complete, we cannot reliably estimate the additional costs, if any, we may incur for potentially required remediation of the site or when we may incur them.

As previously noted, on September 26, 2012, the EPA issued an order under Section 3013 of RCRA requiring us to develop a plan for investigation of four areas at our Ashland Works coke plant. We submitted a Sampling and Analysis Plan ("SAP") to the EPA on October 25, 2012, and the EPA ultimately approved it on June 27, 2014. We completed Phase I of the SAP and submitted a report to the EPA on December 23, 2014. On March 3, 2016, the EPA indicated its desire to suspend the site investigation associated with the Section 3013 RCRA order until resolution of an enforcement action. We cannot reliably estimate how long it will take to complete the site investigation. On March 10, 2016, the EPA invited us to participate in settlement discussions regarding an enforcement action. In April 2015, we executed a tolling agreement with the EPA associated with these claims. Settlement discussions between the parties are ongoing, though whether the parties will reach agreement and any such agreement's terms are uncertain. We currently have accrued approximately $1.4 for the projected cost of the investigation and known remediation. Until the site investigation is complete, we cannot reliably estimate the costs, if any, we may incur for potential additional required remediation of the site or when we may incur them.

As previously reported, on July 15, 2009, we and the Pennsylvania Department of Environmental Protection ("PADEP") entered a Consent Order and Agreement (the "Consent Order") to resolve an alleged unpermitted discharge of wastewater from the closed Hillside Landfill at our former Ambridge Works. Under the terms of the Consent Order, we paid a penalty and also agreed to implement various corrective actions, including an investigation of the area where landfill activities occurred, submission of a plan to collect and treat surface waters and seep discharges, and upon approval from PADEP, implementation of that plan. We have accrued approximately $5.6 for the remedial work required under the approved plan and Consent Order. We submitted a National Pollution Discharge Elimination System ("NPDES") permit application to move to the next work phase. We currently estimate that the remaining work will be completed in 2018, though it may be delayed.

As previously reported, on June 29, 2000, the United States filed a complaint on behalf of the EPA against us in the U.S. District Court for the Southern District of Ohio, Case No. C-1-00530, alleging violations of the Clean Air Act, the Clean Water Act and RCRA at our Middletown Works. Subsequently, the State of Ohio, the Sierra Club and the National Resources Defense Council intervened. On May 15, 2006, the court entered a Consent Decree in Partial Resolution of Pending Claims (the "Consent Decree"). Under the Consent Decree, we paid a civil penalty and performed a supplemental environmental project to remove ozone-depleting refrigerants from certain equipment. We further agreed to undertake a comprehensive RCRA facility investigation at Middletown Works and, as appropriate, complete a corrective measures study. The Consent Decree required us to implement certain RCRA corrective action interim measures to address polychlorinated biphenyls ("PCBs") in sediments and soils at Dicks Creek and certain other specified surface waters, adjacent floodplain areas and other previously identified geographic areas. We have completed the remedial activity at Dicks Creek, but continue to work on the RCRA facility investigation and certain interim measures. We have accrued approximately $14.6 for the cost of known work required under the Consent Decree for the RCRA facility investigation and remaining interim measures.

As previously reported, on October 17, 2012, the EPA issued an NOV and Notice of Intent to File a Civil Administrative Complaint to our Mansfield Works alleging violations of RCRA primarily for our management of electric arc furnace dust at the facility. On September 21, 2016, a consent agreement was filed resolving this matter for a penalty of $0.05 .

As previously reported, on May 12, 2014, the Michigan Department of Environmental Quality ("MDEQ") issued to our Dearborn Works (then a part of Severstal Dearborn, LLC ("Dearborn")) an Air Permit to Install No. 182-05C (the "PTI") to increase the emission limits for the blast furnace and other emission sources. The PTI was issued as a correction to a prior permit to install that did not include certain information during the prior permitting process. On July 10, 2014, the South Dearborn Environmental Improvement Association ("SDEIA"), Detroiters Working for Environmental Justice, Original United Citizens of Southwest Detroit and the Sierra Club filed a Claim of Appeal of the PTI in the State of Michigan, Wayne County Circuit, Case No. 14-008887-AA. Appellants and the MDEQ required the intervention of Dearborn (now owned by us) in this action as an additional appellee. The appellants allege multiple deficiencies with the PTI and the permitting process. On October 9, 2014, the appellants filed a Motion for Peremptory Reversal of the MDEQ's decision to issue the PTI. We believe that the MDEQ issued the PTI properly in compliance with applicable law and will vigorously contest this appeal. On October 17, 2014, we filed a motion to dismiss the appeal. Additionally, on December 15, 2014, we filed a motion to dismiss the appeal for lack of jurisdiction. At the conclusion of a hearing on all three motions on February 12, 2015, all three motions were denied. On March 18, 2015, we filed an application for leave to appeal to the Michigan Court of Appeals seeking to overturn the decision of the Circuit Court denying our motion to dismiss for lack of jurisdiction. On August 27, 2015, the Michigan Court of Appeals granted our application for leave to appeal. On July 12, 2016, the Court of Appeals denied our motion. On October 5, 2016, we filed an application with the Michigan Supreme Court for leave to appeal, seeking to overturn the decision of the Michigan Court of Appeals. Until the appeal is resolved, we cannot determine what

the ultimate permit limits will be. Until the permit limits are determined and final, we cannot reliably estimate the costs, if any, that we may incur if the appeal causes the permit limits to change, nor can we determine if the costs will be material or when we would incur them.

As previously reported, on August 21, 2014, the SDEIA filed a Complaint under the Michigan Environmental Protection Act ("MEPA") in the State of Michigan, Wayne County Circuit Case No. 14-010875-CE. The plaintiffs allege that the air emissions from our Dearborn Works are impacting the air, water and other natural resources, as well as the public trust in such resources. The plaintiffs are requesting, among other requested relief, that the court assess and determine the sufficiency of the PTI's limitations. On October 15, 2014, the court ordered a stay of the proceedings until a final order is issued in Wayne County Circuit Court Case No. 14-008887-AA (discussed above). When the proceedings resume, we will vigorously contest these claims. Until the claims in this Complaint are resolved, we cannot reliably estimate the costs we may incur, if any, or when we may incur them.

As previously reported, on April 27, 2000, MDEQ issued a RCRA Corrective Action Order No. 111-04-00-07E to Rouge Steel Company and Ford Motor Company for the property that includes our Dearborn Works. The Corrective Action Order has been amended five times. We are a party to the Corrective Action Order as the successor-in-interest to Dearborn, which was the successor-in-interest to Rouge Steel Company. The Corrective Action Order requires the site-wide investigation, and where appropriate, remediation of the facility. The site investigation and remediation is ongoing. We cannot reliably estimate at this time how long it will take to complete this site investigation and remediation. To date, Ford Motor Company has incurred most of the costs of the investigation and remediation due to its prior ownership of the steelmaking operations at Dearborn Works. Until the site investigation is complete, we cannot reliably estimate the additional costs we may incur, if any, for any potentially required remediation of the site or when we may incur them.

As previously reported, on August 29, 2013, the West Virginia Department of Environmental Protection ("WVDEP") issued to Mountain State Carbon a renewal NPDES permit for wastewater discharge from the facility to the Ohio River. The new NPDES permit included numerous new, and more stringent, effluent limitations. On October 7, 2013, Mountain State Carbon appealed the permit to the Environmental Quality Board ("EQB"), Appeal No. 13-25-EQB. On February 10, 2016, we reached a partial settlement with WVDEP. On June 3, 2016, we received a favorable ruling from the EQB that required WVDEP to remove the new fecal coliform limits from the discharge permit. In addition, the EQB issued favorable rulings for the two other principal issues, pertaining to selenium and temperature. WVDEP elected not to appeal the EQB's favorable rulings. Until the permit limits are determined and final, we cannot reliably estimate the costs we may incur, if any, or when we may incur them.

In addition to the foregoing matters, we are or may be involved in proceedings with various regulatory authorities that may require us to pay fines, comply with more rigorous standards or other requirements or incur capital and operating expenses for environmental compliance. We believe that the ultimate disposition of the proceedings will not have, individually or in the aggregate, a material adverse effect on our consolidated financial condition, results of operations or cash flows.

Legal Contingencies

As previously reported, since 1990 we have been named as a defendant in numerous lawsuits alleging personal injury as a result of exposure to asbestos. The great majority of these lawsuits have been filed on behalf of people who claim to have been exposed to asbestos while visiting the premises of one of our current or former facilities. The majority of asbestos cases pending in which we are a defendant do not include a specific dollar claim for damages. In the cases that do include specific dollar claims for damages, the complaint typically includes a monetary claim for compensatory damages and a separate monetary claim in an equal amount for punitive damages, and does not attempt to allocate the total monetary claim among the various defendants.

The number of asbestos cases pending at September 30, 2016 , is presented below:

In each case, the amount described is per plaintiff against all of the defendants, collectively. Thus, it usually is not possible at the outset of a case to determine the specific dollar amount of a claim against us. In fact, it usually is not even possible at the outset to determine which of the plaintiffs actually will pursue a claim against us. Typically, that can only be determined through written interrogatories or other discovery after a case has been filed. Therefore, in a case involving multiple plaintiffs and multiple defendants, we initially only account for the lawsuit as one claim. After we have determined through discovery whether a particular plaintiff will pursue a claim, we make an appropriate adjustment to statistically account for that specific claim. It has been our experience that only a small percentage of asbestos plaintiffs ultimately identify us as a target defendant from whom they actually seek damages and most of these claims ultimately are either dismissed or settled for a small fraction of the damages initially claimed. Asbestos-related claims information in the three and nine months ended September 30, 2016 and 2015 is presented below:

Since the onset of asbestos claims against us in 1990, five asbestos claims against us have proceeded to trial in four separate cases. All five concluded with a verdict in our favor. We continue to vigorously defend the asbestos claims. Based upon present knowledge, and the factors above, we believe it is unlikely that the resolution in the aggregate of the asbestos claims against us will have a materially adverse effect on our consolidated results of operations, cash flows or financial condition. However, predictions about the outcome of pending litigation, particularly claims alleging asbestos exposure, are subject to substantial uncertainties. These uncertainties include (1) the significantly variable rate at which new claims may be filed, (2) the effect of bankruptcies of other companies currently or historically defending asbestos claims, (3) the litigation process from jurisdiction to jurisdiction and from case to case, (4) the type and severity of the disease each claimant alleged to suffer, and (5) the potential for enactment of legislation affecting asbestos litigation.

As previously reported, in September and October 2008 and again in July 2010, several companies filed purported class actions in the United States District Court for the Northern District of Illinois against nine steel manufacturers, including us. The case numbers for these actions are 08CV5214, 08CV5371, 08CV5468, 08CV5633, 08CV5700, 08CV5942, 08CV6197 and 10CV04236. On December 28, 2010, another action, case number 32,321, was filed in state court in the Circuit Court for Cocke County, Tennessee. The defendants removed the Tennessee case to federal court and in March 2012 it was transferred to the Northern District of Illinois. The plaintiffs in the various pending actions are companies that purport to have purchased steel products, directly or indirectly, from one or more of the defendants and they claim to file the actions on behalf of all persons and entities who purchased steel products for delivery or pickup in the United States from any of the named defendants at any time from at least as early as January 2005. The complaints allege that the defendant steel producers have conspired in violation of antitrust laws to restrict output and to fix, raise, stabilize and maintain artificially high prices for steel products in the United States. In March 2014, we reached an agreement with the direct purchaser plaintiffs to tentatively settle the claims asserted against us, subject to certain court approvals below. According to that settlement, we agreed to pay

$5.8 to the plaintiff class of direct purchasers in exchange for the members of that class to completely release all claims. We continue to believe that the claims made against us lack any merit, but we elected to enter the settlement to avoid the ongoing expense of defending ourselves in this protracted and expensive antitrust litigation. We provided notice of the proposed settlement to members of the settlement class. After several class members received the notice, they elected to opt out of the class settlement. Following a fairness hearing, on October 21, 2014 the Court entered an order and judgment approving the settlement and dismissing all of the direct plaintiffs' claims against us with prejudice as to the settlement class. In 2014, we recorded a charge for the amount of the tentative settlement with the direct purchaser plaintiff class and paid that amount into an escrow account, which has now been disbursed in accordance with the order that approved the settlement. At this time, we do not have adequate information available to determine that a loss is probable or to reliably or accurately estimate the potential loss, if any, for the remaining indirect purchaser plaintiff class members and any direct purchaser class members that have opted out of the class (hereinafter collectively referred to as the "Remaining Plaintiffs"). Because we have been unable to determine that a potential loss in this case for the Remaining Plaintiffs is probable or estimable, we have not recorded an accrual for this matter. If our assumptions used to evaluate a probable or estimable loss for the Remaining Plaintiffs prove to be incorrect or change, we may be required to record a charge for their claims.

As previously reported, on January 20, 2010, ArcelorMittal France and ArcelorMittal Atlantique et Lorraine (collectively "ArcelorMittal") filed an action in the United States District Court for the District of Delaware, Case No. 10-050-SLR against us, Dearborn, and Wheeling-Nisshin Inc., whom Dearborn indemnified in this action. By virtue of our responsibility as a successor-in-interest to Dearborn and an indemnitor of Wheeling-Nisshin Inc, we now have complete responsibility for the defense of this action. The three named defendants are collectively referred to hereafter as "we" or "us", though the precise claims against each separate defendant may vary. The complaint alleges that we are infringing the claims of U.S. Patent No. 6,296,805 (the "Patent") in making pre-coated cold-rolled boron steel sheet and seeks injunctive relief and unspecified compensatory damages. We filed an answer denying ArcelorMittal's claims and raised various affirmative defenses. We also filed counterclaims against ArcelorMittal for a declaratory judgment that we are not infringing the Patent and that the Patent is invalid. Subsequently, the trial court separated the issues of liability and damages. The case proceeded with a trial to a jury on the issue of liability during the week of January 15, 2011. The jury returned a verdict that we did not infringe the Patent and that the Patent was invalid. Judgment then was entered in our favor. ArcelorMittal filed an appeal with the United States Court of Appeals for the Federal Circuit. On November 30, 2012, the court of appeals issued a decision reversing certain findings related to claim construction and the validity of the Patent and remanded the case to the trial court for further proceedings. On January 30, 2013, ArcelorMittal filed a motion for rehearing with the court of appeals. On March 20, 2013, the court of appeals denied ArcelorMittal's motion for rehearing. The case then was remanded to the trial court for further proceedings. On April 16, 2013, according to a petition previously filed by ArcelorMittal and ArcelorMittal USA LLC, the U.S. Patent and Trademark Office ("PTO") reissued the Patent as U.S. Reissue Patent RE44,153 (the "Reissued Patent"). Also on April 16, 2013, ArcelorMittal filed a second action against us in the United States District Court for the District of Delaware, Case Nos. 1:13-cv-00685 and 1:13-cv-00686 (collectively the "Second Action"). The complaint filed in the Second Action alleges that we are infringing the claims of the Reissued Patent and seeks injunctive relief and unspecified compensatory damages. On April 23, 2013, we filed a motion to dismiss key elements of the complaint filed in the Second Action. In addition, the parties briefed related non-infringement and claims construction issues in the original action. On October 25, 2013, the district court granted summary judgment in our favor, confirming that our product does not infringe the original Patent or the Reissued Patent. The court further ruled that ArcelorMittal's Reissued Patent was invalid due to ArcelorMittal's deliberate violation of a statutory prohibition on broadening a patent through reissue more than two years after the original Patent was granted and that the original Patent had been surrendered when the Reissued Patent was issued and thus is no longer in effect. Final Judgment was entered on October 31, 2013. On November 6, 2013, ArcelorMittal filed a motion to clarify or, in the alternative, to alter or amend the October 31, 2013 judgment. We opposed the motion. On December 5, 2013, the court issued a memorandum and order denying the motion and entered final judgment in our favor, and against ArcelorMittal, specifically ruling that all claims of ArcelorMittal's Reissued Patent are invalid as violative of 35 U.S.C. §251(d). On December 30, 2013, ArcelorMittal filed notices of appeal to the Federal Circuit Court of Appeals. The appeal has been fully briefed and the court of appeals held a hearing on November 4, 2014. On May 12, 2015, the Federal Circuit issued its decision affirming in part and reversing in part the trial court's decision and remanding the case for further proceedings. The Federal Circuit ruled that 23 of the 25 claims of the Reissued Patent were improperly broadened and therefore invalid. However, the Federal Court found that the district court erred in invalidating the remaining two claims and remanded the case for further proceedings before the district court. Following the remand, ArcelorMittal filed a motion in the trial court for leave to amend the Second Action to assert additional patent infringement claims based on another, related patent that the PTO issued on June 10, 2014, No. RE44,940 (Second Reissue Patent). It also filed a motion to dismiss the original action on the grounds that it is now moot in light of the Court of Appeals' last ruling. We opposed both of those motions. In addition, we filed separate motions for summary judgment in the original action on the grounds of non-infringement and invalidity. A hearing on all motions was held on October 27, 2015. On December 4, 2015, the district court issued an order granting our motion for summary judgment that neither of the remaining claims of the Reissued Patent are

infringed and both are invalid as obvious. The court therefore entered final judgment in favor of the defendants in the original case. In the court's order, the judge also granted ArcelorMittal's motion to file a first amended complaint in the Second Action, alleging we are infringing the claims of the Second Reissue Patent, which we deny. On December 21, 2015, ArcelorMittal filed a notice of appeal from the district court's December 4, 2015, final judgment. That appeal is fully briefed and oral argument is scheduled for November 1, 2016. On January 20, 2016, we filed a motion to dismiss the amended complaint in the Second Action, or in the alternative, a motion to stay pending a resolution of the appeal in the original case. On April 19, 2016, the district court issued an order denying our motion and ordering limited discovery. Following discovery, on August 17, 2016, we filed a motion for summary judgment on the basis that the claims are precluded by the judgment in the original case. We intend to continue to contest this matter vigorously. We have not made a determination that a loss is probable and we do not have adequate information to reliably or accurately estimate potential loss if ArcelorMittal prevails in its appeal in this dispute. Because we have been unable to determine that the potential loss in this case is probable or estimable, we have not recorded an accrual for this matter. If our assumptions used to evaluate whether a loss in this matter is either probable or estimable prove to be incorrect or change, we may be required to record a liability for an adverse outcome.

As previously reported, on June 13, 2013, Cliffs Sales Company ("Cliffs") filed an action in the United States District Court for the Northern District of Ohio, Civil Action No. 1:13 cv 1308, against us pertaining to Dearborn Works. Cliffs claims that we breached a May 21, 2008, Agreement for Sale of Reclaimed Iron Units, as amended (the "Iron Unit Agreement"). Cliffs claims that we breached the Iron Unit Agreement by failing to purchase the required amount of pellets, chips and fines as allegedly required. We filed an answer denying the material allegations of the complaint and asserting several affirmative defenses. In January of 2014, the presiding judge ordered a stay of the proceedings. We intend to contest this matter vigorously. At this time, we have not made a determination that a loss is probable and do not have adequate information to reliably or accurately estimate our potential loss if Cliffs prevails in this lawsuit. Because we have been unable to determine that a loss is probable or estimable, we have not recorded an accrual. If our assumptions used to evaluate whether a loss in this matter is either probable or estimable prove to be incorrect or change, we may be required to record a liability for an adverse outcome.

Trade Cases

Corrosion-Resistant Steel

On June 3, 2015, we, along with five other domestic producers, filed anti-dumping ("AD") and countervailing duty ("CVD") petitions against imports of corrosion-resistant steel ("CORE") from China, India, Italy, South Korea and Taiwan. The petitions allege that unfairly traded imports of CORE from those five countries are causing material injury to the domestic industry. The United States Department of Commerce ("DOC") initiated its investigations on June 24, 2015. On May 25, 2016, the DOC announced its final affirmative determinations that (a) imports of CORE from China, India, Italy, South Korea and Taiwan are being sold at less-than-fair-value and should be subject to final AD duties, and that (b) imports of CORE from China, India, Italy and South Korea are benefiting from government subsidies and should be subject to CVD duties. After correcting certain ministerial errors, the DOC calculated final dumping and subsidy margins as follows:

On June 24, 2016, the International Trade Commission ("ITC") determined that the domestic steel industry is materially injured by reason of imports of CORE from China, India, Italy, South Korea and Taiwan that are sold in the United States at less than fair value and that such products are subsidized by the governments of China, India, Italy and South Korea. As a result of the DOC's and the ITC's final determinations, importers are required to post cash deposits with the U.S. government on imports of CORE from China, India, Italy, South Korea and Taiwan at the above CVD margins and AD margins. AD and CVD measures remain in effect for a minimum of five years.

Several of the named countries have filed appeals of the final determinations on CORE with the Court of International Trade ("CIT"). We and the other domestic producers intend to oppose all appeals vigorously.

On September 23, 2016, we and other domestic producers made a filing with the DOC asserting that Chinese steel producers are attempting to circumvent the AD and CVD duties discussed above by transshipping Chinese steel through Vietnam for minor processing before importing CORE into the U.S. market. Our filing requests that the DOC find that imports of Vietnamese CORE that originated in China be subjected to the same AD and CVD duties of shipments of CORE imported directly from China. The DOC must determine whether to initiate an investigation within 45 days of the filing, which would be on or before November 7, 2016. If initiated, we expect that the investigations will take approximately eight to ten months to complete .

Cold-Rolled Steel

On July 28, 2015, we, along with four other domestic producers, filed AD petitions against imports of cold-rolled steel from Brazil, China, India, Japan, the Netherlands, Russia, South Korea and the United Kingdom, as well as CVD petitions against imports of cold-rolled steel from Brazil, China, India, Russia and South Korea. The petitions allege that unfairly traded imports of cold-rolled steel from those eight countries are causing material injury to the domestic industry. On May 17, 2016, the DOC announced its final affirmative determinations that (a) imports of cold-rolled steel from China and Japan are being sold at less-than-fair-value and should be subject to final AD duties and that (b) imports of cold-rolled steel from China are benefiting from government subsidies and should be subject to CVD duties. On July 21, 2016, the DOC announced its final affirmative determinations that (a) imports of cold-rolled steel from Brazil, India, Russia, South Korea and the United Kingdom are being sold at less-than-fair-value and should be subject to final AD duties and that (b) imports of cold-rolled steel from Brazil, India, Russia and South Korea are benefiting from government subsidies and should be subject to CVD duties. After correcting certain ministerial errors, the DOC calculated final dumping and subsidy margins as follows (the below chart does not include the margins determined with respect to Russia because the ITC determined that the imports of cold-rolled steel are negligible, as further discussed below):

On June 22, 2016 and September 2, 2016, the ITC announced its final determinations that the domestic steel industry is materially injured by reason of imports of cold-rolled steel from Brazil, China, India, Japan, South Korea and the United Kingdom. The ITC determined that imports of cold-rolled steel from Russia that are sold in the United States at less-than-fair-value and subsidized by the government of Russia are negligible and terminated the investigations as to Russia. However, in October 2016, we and other domestic steel producers filed an appeal with the CIT appealing the ITC's determination on Russian cold-rolled steel .

As a result of the DOC's and the ITC's final determinations, importers are required to post cash deposits with the U.S. government on imports of cold-rolled steel from Brazil, China, India, Japan, South Korea and the United Kingdom at the above CVD margins and AD margins. AD and CVD measures remain in effect for a minimum of five years.

Several of the named countries have filed appeals of the final determinations on cold-rolled steel with the CIT. We and the other domestic producers intend to oppose all appeals vigorously.

On September 27, 2016, we and other domestic producers made a filing with the DOC asserting that Chinese steel producers are attempting to circumvent the AD and CVD duties discussed above by transshipping Chinese steel through Vietnam for minor processing before importing cold-rolled steel into the U.S. market. Our filing requests that the DOC find that imports of Vietnamese cold-rolled steel that originated in China be subjected to the same AD and CVD duties of shipments of cold-rolled steel imported directly from China. The DOC must determine whether to initiate an investigation within 45 days of the filing, which would be on or before November 14, 2016. If initiated, we expect that the investigations will take approximately eight to ten months to complete.

Hot-Rolled Steel

On August 11, 2015, we, along with five other domestic producers, filed AD petitions against imports of hot-rolled steel from Australia, Brazil, Japan, the Netherlands, South Korea, Turkey and the United Kingdom, as well as CVD petitions against imports of hot-rolled steel from Brazil, South Korea and Turkey. The petitions allege that unfairly traded imports of hot-rolled steel from those seven countries are causing material injury to the domestic industry. The DOC initiated its investigations on September 1, 2015. On August 5, 2016, the DOC announced its final affirmative determinations that (a) imports of hot-rolled steel from Australia, Brazil, Japan, the Netherlands, South Korea, Turkey and the United Kingdom are being sold at less-than-fair-value and should be subject to final AD duties and that (b) imports of hot-rolled steel from Brazil and South Korea are benefiting from government subsidies and should be subject to CVD duties. After correcting certain ministerial errors, the DOC calculated final dumping and subsidy margins as follows:

On September 12, 2016 the ITC announced its final determinations that the domestic steel industry is materially injured by reason of imports of hot-rolled steel from Australia, Brazil, Japan, the Netherlands, South Korea, Turkey and the United Kingdom . As a result of the DOC's and the ITC's final determinations, importers are required to post cash deposits with the U.S. government on imports of hot-rolled steel from Australia, Brazil, Japan, the Netherlands, South Korea, Turkey and the United Kingdom at the above CVD margins and AD margins. AD and CVD measures remain in effect for a minimum of five years.

The final determinations on hot-rolled steel have been appealed to the CIT. We and the other domestic producers intend to oppose all appeals vigorously.

Stainless Steel

On February 12, 2016, we, along with three other domestic producers, filed AD and CVD petitions against imports of stainless steel from China. The petitions allege that unfairly traded imports of stainless steel from China are causing material injury to the domestic industry. The DOC initiated its investigations on March 4, 2016. On March 25, 2016, the ITC made a unanimous preliminary determination of injury to the domestic industry caused by imports of stainless steel from China. On June 23, 2016, the DOC preliminarily determined that Chinese producers significantly increased their shipments of products into the U.S. market before the DOC's preliminary determination of AD and CVD duties and, as such, that critical circumstances exist for imports of certain stainless steel from China. On July 12, 2016, the DOC preliminarily determined that imports of stainless steel from China are benefiting from unfair government subsidies and should be subject to CVD duties. On September 12, 2016, the DOC also preliminarily determined that imports of stainless steel from China are being sold at less-than-fair-value and should be subject to AD duties. The DOC's critical circumstances preliminary determination also allows the DOC to impose CVD duties on certain stainless steel imports from China retroactively from April 19, 2016 and AD duties retroactively from 90 days prior to the publication of the DOC's preliminary determination in the Federal Register. The DOC calculated preliminary dumping and subsidy margins as follows:

As a result of the DOC's and ITC's preliminary determinations, importers of stainless steel from China are required to post cash deposits with the U.S. government on imports of stainless steel from at the above CVD margins and AD margins. Preliminary duties will remain in effect until the DOC issues final determinations. We expect the entire investigation to take

approximately one year, with final determinations of whether dumping, subsidization and injury have occurred likely issued in the first quarter of 2017.

Grain-Oriented Electrical Steel

On September 18, 2013, we, along with another domestic producer and the United Steelworkers (collectively, the "Petitioners"), filed trade cases against imports of grain-oriented electrical steel ("GOES") from seven countries. We filed AD petitions against China, the Czech Republic, Germany, Japan, Poland, Russia and South Korea and a CVD petition against China charging that unfairly traded imports of GOES from those seven countries are causing material injury to the domestic industry. The DOC initiated the cases on October 24, 2013. On November 19, 2013, the ITC made a preliminary determination that there is a reasonable indication that GOES imports caused or threaten to cause material injury. On May 5, 2014, the DOC issued preliminary determinations that imports of GOES from China, the Czech Republic, Germany, Japan, Poland, Russia and South Korea are being dumped in the United States. On July 17, 2014, the DOC issued final dumping determinations for imports of GOES from Germany, Japan and Poland, affirming the preliminary dumping margins for these three countries. As a result of the preliminary dumping determinations on China, the Czech Republic, Russia and South Korea, and the final dumping determinations on Germany, Japan and Poland, importers were required to post cash deposits with U.S. Customs and Border Protection on imports of GOES from these seven countries (in addition to any deposits required by the preliminary affirmative CVD determinations). The DOC also reached affirmative preliminary critical circumstances findings for Poland and Russia. The ITC issued its final determination for imports of GOES from China, the Czech Republic, Germany, Japan, Poland, Russia and South Korea in separate decisions issued on August 27, 2014 and October 23, 2014. In each of these decisions, the ITC determined in a 5-1 vote that the United States steel industry is neither materially injured nor threatened with material injury by those imports. These two ITC decisions nullify the DOC's preliminary assessment of dumping duties on GOES imports from each of the countries in the filed trade petition, as well as a CVD determination for China. On September 16, 2014, the Petitioners filed an appeal of the ITC's August 27, 2014 decision to the CIT, and on November 13, 2014, the Petitioners filed an appeal of the ITC's October 23, 2014 decision to the CIT. The CIT consolidated those two appeals into a single appeal. The parties have fully briefed the appeal and are awaiting the decision by the CIT.

Other Contingencies

In addition to the matters we discussed above, there are various pending and potential claims against us and our subsidiaries involving product liability, commercial, employee benefits and other matters arising in the ordinary course of business. Because of the considerable uncertainties which exist for any claim, it is difficult to reliably or accurately estimate what would be the amount of a loss if a claimant prevails. If material assumptions or factual understandings we rely on to evaluate exposure for these contingencies prove to be inaccurate or otherwise change, we may be required to record a liability for an adverse outcome. If, however, we have reasonably evaluated potential future liabilities for all of these contingencies, including those described more specifically above, it is our opinion, unless we otherwise noted, that the ultimate liability from these contingencies, individually and in the aggregate, should not have a material effect on our consolidated financial position, results of operations or cash flows.

NOTE 8 - Stockholders' Equity

In May 2016, AK Holding issued 59.8 million shares of common stock at $4.40 per share. We received net proceeds of $249.4 after underwriting discounts and other fees. We used the net proceeds from the sale of the common stock to reduce our debt by repaying outstanding borrowings under our Credit Facility.

On September 7, 2016, our stockholders approved an amendment of our Restated Certificate of Incorporation to increase the number of shares of common stock authorized for issuance from 300 million to 450 million shares.

NOTE 9 - Share-based Compensation

AK Holding's Stock Incentive Plan ("SIP") permits the granting of nonqualified stock option, restricted stock, performance share and restricted stock unit awards to our Directors, officers and other employees. At our Annual Meeting of Stockholders in May 2016, stockholders approved an increase of 4.8 million shares in the number of shares reserved for issuance under the SIP. We have estimated share-based compensation expense to be $5.7 for 2016 . The third quarter and year-to-date information is presented below:

We granted stock options on 623,200 shares during the nine months ended September 30, 2016 , with a weighted-average fair value of $1.27 per share of stock option. 15,050 options were exercised in 2016 .

We granted restricted stock awards of 613,060 shares during the nine months ended September 30, 2016 , at a weighted-average fair value of $1.78 per share. The total intrinsic value of restricted stock awards that vested (i.e., restrictions lapsed) during the nine months ended September 30, 2016 was $1.7 .

We granted performance share awards of 484,500 shares during the nine months ended September 30, 2016 , with a weighted-average fair value of $1.74 per share.

NOTE 10 - Comprehensive Income (Loss)

Other comprehensive income (loss), net of tax, information is presented below:

NOTE 11 - Earnings per Share

Earnings per share are calculated using the "two-class" method. Under the "two-class" method, undistributed earnings are allocated to both common shares and participating securities. We divide the sum of distributed earnings to common stockholders and undistributed earnings to common stockholders by the weighted-average number of common shares outstanding during the period. The restricted stock granted by AK Holding is entitled to dividends before vesting and meets the criteria of a participating security.